Samsung Electronics Co. is sampling its 1.8-inch and 2.5-inch 64 Gigabyte (GB) solid state drives (SSD) with a super-fast SATA (Serial ATA) II/native SATA interface.
With a sequential write speed of 100 Megabyte per second (MBps) and sequential read speed of 120 MBps, the SATA II SSD is poised to expand the market for solid state drives from notebook PCs to corporate servers and other high-performance storage applications.
“The 64GB SATA II SSD is based on Samsung’s cutting-edge NAND technology with dramatically improved performance specs that are taking system performance to a whole new level of efficiency,” said Jim Elliott, director, NAND flash marketing, Samsung Semiconductor, Inc.
Samsung’s SATA II SSD combines a 50 nm-class, single-level-cell (SLC) 8Gb flash chip with a Samsung proprietary, high-speed SATA controller and supporting software.
The new SATA II SSD has a 3.0 gigabit-per-second (Gbps) interface speed which is twice as fast as its SATA I predecessor. Moreover, the SATA II SSD requires only half as much power as the 1.9 watts consumed by hard drives now used in notebook PCs and only one-tenth the power consumed by enterprise-class 15,000rpm hard drives in servers.
When compared to the hard disc technology, this new drive does not produce any noise, weighs 40g (only 15g on the slim profile model) and consume abou 0.7w.
Market research firm Web-Feet Research estimates that the NAND flash–based SSD market is expected to show 74 percent compounded annual growth from 2007 through 2012 to reach US$10billion in 2012.