Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7
4 posts

Wannabe Geek


  Reply # 255946 15-Sep-2009 20:23 Send private message

Hi guys excellent posts.
Just one thing I need confirmed can you use any sky card or does it need to be a 45xx card.
Thanks for the Help



87 posts

Master Geek
+1 received by user: 1


  Reply # 256397 17-Sep-2009 10:09 Send private message

Sorry M, I've only got the 4500 card to try it out on (changed out from 17xx when we got a HDi to trial).

There was a long thread on this subject some time back, with from memory 17xx being very problematic, however that was before anyone was using NewCS to read the card.

Maybe someone could jump in with their 17xx experiences?

3 posts

Wannabe Geek


  Reply # 257149 20-Sep-2009 09:20 Send private message

mawhatt: Hi guys excellent posts.
Just one thing I need confirmed can you use any sky card or does it need to be a 45xx card.
Thanks for the Help


Total newb question, but how do you tell the difference between the cards? i.e. How do I know which one I have?



87 posts

Master Geek
+1 received by user: 1


  Reply # 257157 20-Sep-2009 10:27 Send private message

Look on the back of the card (the white side).

It will have numbers like: NZ4500xx etc. The '45' is the indicator.Laughing

1 post

Wannabe Geek


  Reply # 258539 26-Sep-2009 13:38 Send private message

Hey guys, stumbled across this thread on my epic journey to get f0xtel working on my mediapc.

I'm actually using MediaPortal rather than MCE, but it should have worked just the same. I got everything working until DVBLink. It just simply refused to work nicely with mediaportal. I've actually got everything working very nicely with the unofficial MDAPI 2009 plugin. ( http://www.zshare.net/download/625811178f26c857/ )

Anyway, time to share some info.

Using a OmniKey 3021 PC/SC usb reader and newCS 1.67 on my ubunu linux fileserver. Omnikey provide drivers on their website. You'll need to install pcsc tools and pcsc lite to get it going. When you try the install it lets you know everything you need. Some basic linux experience installing from tarballs required (otherwise its a 5min job). Running pcsc_scan will show if your reader and/or card is detected. newcs config is similar to the one in this thread.

MDAPI has a readme.pdf that shows you how to install it step by step. Then you just chuck the acamd files into the folder which has .mdpluginsgohere file in it.

If you want to record multiple channels from the same transport stream, you'll need to edit MDAPICards.xml and change the MDAPI = "1" bit to say 6, if you want to record/watch upto 6 chanels from one stream simultaneously. Next time the TVServer is started, it'll create 6 seperate folders, into which you put 6 lots of acamd. **You'll need a seperate user/pass in newcs for each instance** If you try and log in with the same user it will boot off the previous connection, and the 2-6 instances will have a login war.

You can do the same for multiple tuners as well.

My cardreader was $30AU off ebay ;) Works with NDSCam under windows too if you install Omnikeys PC/SC drivers.

DVB-S PCI cards were $50-60 each. Prof 6200 PCI but only have 32bit drivers. (I'm using Win7 btw)

For anyone in Perth, tuning details for Optus C1 are LOF1 = 9750 MHz | LOF2 = 10700 MHz | LNBSW = 10700 MHz

I'd be happy to write up a guide some time if anyone wants it. It'll be mediaportal specific since the MDAPI plugin works directly with MP TV server to tune channels. I'm not too sure if the USB card readers would work in a virtual machine either. newCS 1.65 DOES support PCSC under windows though :)

74 posts

Master Geek


  Reply # 258913 28-Sep-2009 10:26 Send private message



NewCS



 
  x.x.x.x
 
 
  
   Phoenix on Com1
   phoenix
   357
   COM1
   odd
   normal
   No
   Yes
   No
   No
   No
   Yes
   No
   No
   Yes
   15000
   Yes
   0000
   No
   round
  
 
 
   No
   10001
   
    localhost
   
 
 
   20
   -1
 
 
  
   8080
   No
  
  
   newcs
   newcs
   admin
  
 
 
   NewCSpwd
   simple
   internal
   all
   console
   1001
   normal,init
 
 
   Yes
   newcs
   01 02 03 04 05 06 07 08 09 10 11 12 13 14
   
    xxxx
    xxxx
    15000
    on
    off
    
     Phoenix on Com1
    
    No
                        1
   
 



AcamD 6.03


#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is 1700 & FF00. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#
# newcamd client
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# radegast client
# No EMM support
#
# gbox client
# UDP localhost only, default ports, No EMM support
#
# gboxn client
# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text
#
# camd35 client
# UDP protocol
#
#radegast:192.168.7.54:10001:0/0000/0000
#gbox:0.0.0.0:0:0/0000/0000
#camd35:192.168.7.54:24110:1/0000/0000:username:password
newcamd:10.1.1.3:15000:1/0100/ffff:xxxx:xxxx:0102030405060708091011121314
#newcamd:192.168.7.54:34001:1/0100/ff00:username:password:0102030405060708091011121314:0000006A
#emubox03:192.168.7.54:10000:0/0000/0000
#gboxn:192.168.7.54:6600:0/0000/0000:AA34BB78:192.168.7.53:6601:AA34BB71:Server 1



Hi all,

Finally got around to trying to set up yesterday, but newcs doesn't seem to want to co-operate.  This is what the screen is showing.

 http://www.geekzone.co.nz/imagessubs/blog3dc1c7974a656a501b41da3dd61e1691.jpg

The newcs and acamd scripts are as above.  Any thoughts as to what I'm doing wrong?



87 posts

Master Geek
+1 received by user: 1


  Reply # 258972 28-Sep-2009 13:15 Send private message

Hey TB

Can only see 3 lines of logging in that jpg (which look fine)? Can you post the rest of the log (or is it just me?).

74 posts

Master Geek


  Reply # 258974 28-Sep-2009 13:18 Send private message

argo: Hey TB

Can only see 3 lines of logging in that jpg (which look fine)? Can you post the rest of the log (or is it just me?).


Thanks for answering ARGO.

That's the only 3 lines that come up.



87 posts

Master Geek
+1 received by user: 1


  Reply # 259424 29-Sep-2009 16:38 Send private message

Hi Tb

Bit weird but your console is at least giving output. Perhaps try setting the 'debug' options to this:


mode>simple</mode>

level>internal</level>

type>all</type>

output>console</output>
 

and then run to see.



You could also try:


output>console,file>

logfile>/hdd/newcs.txt</logfile>

where "/hdd/" is a convenient directory to store the newcs.txt log.



All the best.

EDIT: Had to remove the "<" from the front of each line, it causes the post to go ballistic otherwise!

74 posts

Master Geek


  Reply # 259429 29-Sep-2009 16:48 Send private message

Hi Argo,

Those are the settings I have.

Do you mean I need to add f(clean); between the listings, as shown?



87 posts

Master Geek
+1 received by user: 1


  Reply # 259432 29-Sep-2009 16:58 Send private message

tbergman: Hi Argo,

Those are the settings I have.

Do you mean I need to add f(clean); between the listings, as shown?



Sorry!! the f(clean) was added by this website when  submited the post. I hoped I had edited that out b4 you saw it.

74 posts

Master Geek


  Reply # 259433 29-Sep-2009 16:59 Send private message

Thanks for that

74 posts

Master Geek


  Reply # 259702 30-Sep-2009 12:30 Send private message

I downloaded a new copy of NewCS and it all worked. I think it might have been a problem with the .exe file.



87 posts

Master Geek
+1 received by user: 1


  Reply # 259837 30-Sep-2009 18:47 Send private message

Good news! Laughing

74 posts

Master Geek


  Reply # 260724 2-Oct-2009 23:58 Send private message

Had a serious go at setting all this up.

Managed to get the tuner working in DVBViewer and receiving the unecrypted channels (TVSN, Expo, NITV).

When I started NewCS, this is the readout I got:-


This is NewCS 1.65 - the New CardServer by the Butter-team..

Compiled on Jan 19 2009 at 17:54:08

Reading Config file from newcs.xml

TCP-log password is enabled, set to: NewCSpwd

level: internal

type: all

output: console,tcp

logger config: level 16777215 type 255 output 5

Console log options: level 16777215 type 255

TCP log options: level 1 type 255

[ 15:58:39 ] [ Box detect ] Windows Vista Build 7600

[ 15:58:39 ] [ Config ] Option for device 0 (Phoenix on Com1) not present, defaulting to N

O

[ 15:58:39 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000

[ 15:58:39 ] [ Config ] Option for device 0 (Phoenix on Com1) not present, no static sids adde

d to filter

[ 15:58:39 ] [ Config ] COM1 ECM priority: round

[ 15:58:39 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234

- 0x85f968 [ op ptr 0x1775940 ]

[ 15:58:39 ] [ Newcamd ] Server name : newcs

[ 15:58:39 ] [ Newcamd ] Des key : 0102030405060708091011121314

[ 15:58:39 ] [ Config ] Option not present for User: tuner1, NO reader control enabled

[ 15:58:39 ] [ Newcamd ] User 2: tuner1, Pass: b1teme, Host localhost, Port: 15000, Au: On, Spider a

llowed: No, Sidoverride: No, level: 1

[ 15:58:39 ] [ EMM Cache ] Initialising dynamic Cache

[ 15:58:39 ] [ ECM Cache ] Initialising dynamic Cache

[ 15:58:39 ] Calibrating delay loops

[ 15:58:39 ] usleep(5) takes: 0 s 16000 us

[ 15:58:39 ] usleep(10) takes: 0 s 15000 us

[ 15:58:39 ] usleep(100) takes: 0 s 16000 us

[ 15:58:39 ] usleep(500) takes: 0 s 16000 us

[ 15:58:39 ] Allocation memory for 200 regular users

[ 15:58:39 ] [ Loader ] Starting Telnet on port 1001

[ 15:58:39 ] [ SockSrv ] Server thread started

[ 15:58:39 ] [ Loader ] Reader type 2 on node COM1

[ 15:58:39 ] [ CardMan ] Reseting reader parameters

[ 15:58:39 ] [ Phoenix ] Opening device COM1

[ 15:58:39 ] [ Phoenix ] Setting parity to ODD on node COM1

[ 15:58:39 ] [ Phoenix ] Setting 1 Stop bit on node COM1

[ 15:58:39 ] [ Phoenix ] Setting baud to 9600

[ 15:58:41 ] Phoenix_read:

0000: 03 01 77 5b 3f 33 f2 6f 69 00 ad f5 f1 ff ff 9d ..w[?3.oi.......

0010: dd 7f ff ff ....

[ 15:58:41 ] [ CardMan ] Atr header is 3F 7F [INVERSE]

[ 15:58:41 ] [ ATR ] Data:

0000: 3f 7f 11 25 03 33 b0 09 69 ff 4a 50 70 00 00 46 ?..%.3..i.JPp..F

0010: 44 01 00 00 00 00 00 00 00 00 00 D..........

[ 15:58:41 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu

[ 15:58:41 ] [ ATR ] Historical bytes: 3 [B0] [09] i [FF] J P p [00] [00] F D [01] [00] [00]

[ 15:58:41 ] [ Loader ] Init NDS card

[ 15:58:41 ] Card reader locked for reader Phoenix on Com1 [COM1]

[ 15:58:41 ] [ Phoenix ] Setting parity to ODD on node COM1

[ 15:58:41 ] [ Phoenix ] Setting 2 Stop bits on node COM1

[ 15:58:41 ] [ Phoenix ] Setting baud to 9600

[ 15:58:41 ] [ NDS ] Sending to Card: D074018001

[ 15:58:41 ] Phoenix_write:

0000: d0 74 01 80 01 .t...

[ 15:58:41 ] Phoenix_read:

0000: 74 t

[ 15:58:41 ] Phoenix_read:

0000: 78 x

[ 15:58:41 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:41 ] [ NDS ] Status Word from Card: 9000

[ 15:58:41 ] [ NDS ] Sending to Card: D074010078

[ 15:58:41 ] Phoenix_write:

0000: d0 74 01 00 78 .t..x

[ 15:58:41 ] Phoenix_read:

0000: 74 t

[ 15:58:42 ] Phoenix_read:

0000: 01 76 1d 01 d0 0e ff 02 d0 1e 09 03 d0 28 02 03 .v...........(..

0010: d0 2a ff 03 d0 2e ff 00 d0 32 01 01 d0 36 ff 02 .*.......2...6..

0020: d0 38 02 03 d0 40 ff 00 d0 42 ff 00 d0 44 35 01 .8...@...B...D5.

0030: d0 46 ff 00 d0 4a ff 00 d0 4c 09 01 d0 4e 05 03 .F...J...L...N..

0040: d0 50 ff 02 d0 54 2c 03 d0 56 ff 02 d0 58 4a 03 .P...T,..V...XJ.

0050: d0 5a ff 02 d0 5c 04 03 d0 5e ff 02 d0 72 20 03 .Z...\...^...r .

0060: d0 74 ff 02 d0 76 0a 03 d0 78 18 03 d0 b4 40 01 .t...v...x....@.

0070: d0 bc 50 03 d0 be 10 03 ..P.....

[ 15:58:42 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:42 ] [ NDS ] Status Word from Card: 9000

[ 15:58:42 ] [ NDS ] Sending to Card: D074168001

[ 15:58:42 ] Phoenix_write:

0000: d0 74 16 80 01 .t...

[ 15:58:42 ] Phoenix_read:

0000: 74 t

[ 15:58:42 ] Phoenix_read:

0000: 04 .

[ 15:58:42 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:42 ] [ NDS ] Status Word from Card: 9000

[ 15:58:42 ] [ NDS ] Sending to Card: D074160004

[ 15:58:42 ] Phoenix_write:

0000: d0 74 16 00 04 .t...

[ 15:58:42 ] Phoenix_read:

0000: 74 t

[ 15:58:42 ] Phoenix_read:

0000: 26 02 3f 00 &.?.

[ 15:58:42 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:42 ] [ NDS ] Status Word from Card: 9000

[ 15:58:42 ] [ NDS ] Sending to Card: D036008001

[ 15:58:42 ] Phoenix_write:

0000: d0 36 00 80 01 .6...

[ 15:58:42 ] Phoenix_read:

0000: 36 6

[ 15:58:42 ] Phoenix_read:

0000: f0 .

[ 15:58:42 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:42 ] [ NDS ] Status Word from Card: 9000

[ 15:58:42 ] [ NDS ] Sending to Card: D0360000F0

[ 15:58:42 ] Phoenix_write:

0000: d0 36 00 00 f0 .6...

[ 15:58:42 ] Phoenix_read:

0000: 36 6

[ 15:58:42 ] Phoenix_read:

0000: 90 00 04 01 fa 00 00 00 00 00 00 00 00 00 3d 41 ..............=A

0010: de 01 00 75 02 28 00 00 f3 12 08 17 a8 de 07 00 ...u.(..........

0020: 12 00 00 00 00 00 f9 00 00 03 ea df 75 12 00 80 ............u...

0030: e2 13 80 00 04 d2 ff 7f 00 00 ff ff ff ff ff ff ................

0040: ff 00 00 00 00 f6 02 00 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00e0: 00 00 00 00 00 00 67 08 63 b2 75 e3 7e 15 8b f3 ......g.c.u.~...

[ 15:58:42 ] Phoenix_read:

0000: 90 00 ..

[ 15:58:42 ] [ NDS ] Status Word from Card: 9000

[ 15:58:42 ] [ NDS ] BOXID: 120817A8

[ 15:58:42 ] [ NDS ] Sending to Card: D04C000009

[ 15:58:42 ] Phoenix_write:

0000: d0 4c 00 00 09 .L...

[ 15:58:42 ] Phoenix_read:

0000: 4c L

[ 15:58:42 ] Phoenix_write:

0000: 12 08 17 a8 03 00 00 02 04 .........

[ 15:58:42 ] Phoenix_read:

0000: 90 20 .

[ 15:58:42 ] [ NDS ] Status Word from Card: 9020

[ 15:58:42 ] [ NDS ] Sending to Card: D05800004A

[ 15:58:42 ] Phoenix_write:

0000: d0 58 00 00 4a .X..J

[ 15:58:42 ] Phoenix_read:

0000: 58 X

[ 15:58:43 ] Phoenix_read:

0000: 15 48 25 00 3d 41 de 01 a3 01 92 4d 04 80 02 00 .H%.=A.....M....

0010: 00 00 00 00 2b 5b 99 00 09 0b 00 3d 41 de ff ff ....+[.....=A...

0020: ff ff 00 3d 41 00 ff ff ff 00 00 00 00 00 00 00 ...=A...........

0030: 00 00 08 00 00 00 01 41 55 53 00 24 34 32 38 30 .......AUS.$4280

0040: 38 37 53 30 75 12 a4 f5 00 00 87S0u.....

[ 15:58:43 ] Phoenix_read:

0000: 90 20 .

[ 15:58:43 ] [ NDS ] Status Word from Card: 9020

[ 15:58:43 ] [ NDS ] CAID: 090B

[ 15:58:43 ] [ KeymaN ] Adding key 3D41DE type 0 on Provider 000000 for caid 090B ID=0

[ 15:58:43 ] [ KeymaN ] Adding key 3D4100 type 1 on Provider 000000 for caid 090B ID=0

[ 15:58:43 ] [ NDS ] Sending to Card: D0B4000040

[ 15:58:43 ] Phoenix_write:

0000: d0 b4 00 00 40 ....@

[ 15:58:43 ] Phoenix_read:

0000: b4 .

[ 15:58:43 ] Phoenix_write:

0000: 23 e4 b9 5b 52 88 48 38 d4 d5 49 14 79 68 a6 13 #..[R.H8..I.yh..

0010: 07 1c 4e d4 bf 16 22 06 57 86 57 e2 2e f7 51 ca ..N...".W.W...Q.

0020: c4 a1 55 29 23 06 23 2e 31 4f f6 fe 8a 5c e6 79 ..U)#.#.1O...\.y

0030: 42 27 a5 19 f7 a6 c4 e7 97 b8 ec 82 ea 01 00 01 B'..............

[ 15:58:43 ] Phoenix_read:

0000: 90 20 .

[ 15:58:43 ] [ NDS ] Status Word from Card: 9020

[ 15:58:43 ] [ NDS ] Sending to Card: D0BC000050

[ 15:58:43 ] Phoenix_write:

0000: d0 bc 00 00 50 ....P

[ 15:58:43 ] Phoenix_read:

0000: bc .

[ 15:58:44 ] Phoenix_read:

0000: b7 10 db c0 21 28 05 d8 f1 25 2a cf 79 23 77 d7 ....!(...%*.y#w.

0010: 42 c0 a9 92 a9 8f 34 86 f8 b5 34 23 bc 07 33 95 B.....4...4#..3.

0020: 8d 17 7d fc b1 80 cd b2 a6 6b 30 62 c5 6f 2a 08 ..}......k0b.o*.

0030: 31 40 eb e6 f6 4a 5d 94 6b e6 8b 31 38 03 c2 00 1@...J].k..18...

0040: 21 99 60 02 2a 49 d8 22 a1 87 74 96 58 82 94 c7 !.`.*I."..t.X...

[ 15:58:44 ] Phoenix_read:

0000: 90 20 .

[ 15:58:44 ] [ NDS ] Status Word from Card: 9020

[ 15:58:44 ] [ NDS ] Sending to Card: D3BE000020

[ 15:58:44 ] Phoenix_write:

0000: d3 be 00 00 20 ....

[ 15:58:44 ] Phoenix_read:

0000: be .

[ 15:58:44 ] Phoenix_read:

0000: 74 07 bc df 40 4d dc fb d3 27 af 63 9c 4a 88 d9 t...@M...'.c.J..

0010: c5 be 50 19 d5 5b 65 ef fc 75 97 85 ca 38 1d de ..P..[e..u...8..

[ 15:58:44 ] Phoenix_read:

0000: 90 20 .

[ 15:58:44 ] [ NDS ] Status Word from Card: 9020

[ 15:58:44 ] [ NDS ] Sending to Card: D14C000009

[ 15:58:44 ] Phoenix_write:

0000: d1 4c 00 00 09 .L...

[ 15:58:44 ] Phoenix_read:

0000: 4c L

[ 15:58:44 ] Phoenix_write:

0000: 12 08 17 a8 03 00 00 02 04 .........

[ 15:58:45 ] Phoenix_read:

0000: 90 20 .

[ 15:58:45 ] [ NDS ] Status Word from Card: 9020

[ 15:58:45 ] Card reader unlocked for reader Phoenix on Com1 [COM1]

[ 15:58:45 ] [ 090B ] Init took: 3.697000

[ 15:58:45 ] [ Loader ] Card 090B on port COM1 ready

[ 15:58:45 ] [ Card queue COM1 ] Starting...

[ 15:58:45 ] [ Loader ] Starting Newcamd Server on port 15000

[ 15:58:45 ] [ Newcamd ] Newcamd thread Server started on port 15000

newcamd: main loop

[ 15:58:45 ] [ Newcamd:15000 ] rlogin for user tuner1 fd 1324

[ 15:58:45 ] [ Newcamd ] new connection from 127.0.0.1 on socket 1348

[ 15:58:45 ] [ Newcamd:15000 ] Connection from 127.0.0.1

[ 15:58:45 ] [ Newcamd:15000 ] got rnd from tuner1 fd 1324

[ 15:58:45 ] [ Newcamd:15000 ] server name to localhost:15000.

des_decrypt: bad len ?

[ 15:58:45 ] [ Newcamd:15000 ] Can't decrypt client msg, rejecting!

[ 15:58:45 ] [ Newcamd ] Socket 1324 hung up

[ 15:58:45 ] [ Newcamd:15000 ] User tuner1 logout

This is the NewCS.xml file

<?xml version="1.0"?>
<newCSconfig>
 <readers name="Standard Phoenix on PC">
  <device>
   <name>Phoenix on Com1</name>
   <type>phoenix</type>
   <mhz>357</mhz>
   <node>COM1</node>
   <parity>odd</parity>
   <reset>normal</reset>
   <export>No</export>
   <enabled>Yes</enabled>
   <blocksa>No</blocksa>
   <blockua>No</blockua>
   <blockga>No</blockga>
   <blockC0>Yes</blockC0>
   <crypto-special>No</crypto-special>
   <PTShandshake>No</PTShandshake>
   <carddetect>no</carddetect>
   <newcamd_port>15000</newcamd_port>
   <autosid>Yes</autosid>
   <pincode>0000</pincode>
   <Seca-PPV>No</Seca-PPV>
   <priority>round</priority>
  </device>
 </readers>
 <radegastserver>
   <enabled>No</enabled>
   <port>10001</port>
   <allow>
    <hostname>localhost</hostname>
   </allow>
 </radegastserver>
 <cache>
   <emm>20</emm>
   <ecm>-1</ecm>
 </cache>
 <httpd>
  <server>
   <port>8080</port>
   <enabled>no</enabled>
  </server>
  <user>
   <name>newcs</name>
   <password>newcs</password>
   <accesslevel>admin</accesslevel>
  </user>
 </httpd>
 <debug>
   <password>NewCSpwd</password>
   <mode>simple</mode>
   <level>internal</level>
   <type>all</type>
   <output>console,tcp</output>
   <tcp_port>1001</tcp_port>
   <tcp_options>normal,init</tcp_options>
 </debug>
 <newcamdserver>
   <enabled>Yes</enabled>
   <name>newcs</name>
   <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
   <user>
    <name>tuner1</name>
    <password>b1teme</password>
    <au>on</au>
    <hostname>localhost</hostname>
    <port>15000</port>
    <sidoverride>off</sidoverride>
    <spider>No</spider>
                                <cardlevel>1</cardlevel>
   </user>
 </newcamdserver>
        <chameleon2>
                <server>
                        <port>1234</port>
                        <enabled>no</enabled>
                        <realm>myShares</realm>
                </server>
                <peer>
                        <hostname>remote</hostname>
                        <port>1234</port>
                        <name>myname</name>
                        <password>mypassword</password>
                        <realm>myShares</realm>
                </peer>
                <user>
                        <name>myname</name>
                        <password>mypassword</password>
                        <realm>myShares</realm>
                </user>
        </chameleon2>
</newCSconfig>


Where did I go wrong here?


1 | 2 | 3 | 4 | 5 | 6 | 7
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





Trending now »

Hot discussions in our forums right now:

forgot how to unlock a car door
Created by joker97, last reply by benokobi on 18-Dec-2014 22:08 (38 replies)
Pages... 2 3


Has Spark (Telecom) locked their iphone 6 ?
Created by anewguy2014, last reply by michaelmurfy on 17-Dec-2014 14:32 (25 replies)
Pages... 2


In defence of cats
Created by Rikkitic, last reply by DarthKermit on 17-Dec-2014 15:40 (68 replies)
Pages... 3 4 5


How is iParcel these days?
Created by peejayw, last reply by surfisup1000 on 18-Dec-2014 21:45 (19 replies)
Pages... 2


Couriers starting to charge for redelivery
Created by mattwnz, last reply by raytaylor on 18-Dec-2014 02:27 (77 replies)
Pages... 4 5 6


Slaughter of Innocents
Created by networkn, last reply by heylinb4nz on 19-Dec-2014 09:55 (55 replies)
Pages... 2 3 4


Google Chromecast now available in New Zealand
Created by freitasm, last reply by markl on 18-Dec-2014 15:36 (153 replies)
Pages... 9 10 11


How to upload 150GB of photos to iCloud?
Created by josephhinvest, last reply by timbosan on 17-Dec-2014 15:05 (35 replies)
Pages... 2 3



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.