Hi
I am using cat 5e/6 hdmi extenders to send mysky to 2 rooms. I have the sound setting on Dolby in the mysky box settings. This works fine in one of the rooms as the tv is connected to a receiver which can decode DD, however in the other room I get no sound on channels which are broadcast in DD as the cable is plugged directly in the tv and the tv cannot decode DD. If I change the sound setting in mysky to PCM/mpeg I get sound on both tvs however I lose DD. Are there any solutions for this apart from buying another receiver? I know there has been a lot of discussion in these forums about people using cat5 hdmi extenders so I would be interested in what others are doing.
Cheers
Richard