Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.



93 posts

Master Geek


Topic # 97136 11-Feb-2012 09:14 Send private message

Help guys!

last night my internet was down and i restart my router this morning, thing looks ok (internet) after i restarted. i am however cant make call from my voip phone which was with 2talk and use a Linksys SPA3102 adapter.  

it has got dial tone, and i can access to the SPA interface. there are two lights on the SPA keep flashing and the 3rd light which normally line1 is not on. i also notice my router's Lan indicator keep flashing and the router interface shows 1 LAN connections while i have 3 cables connected to it. (My TV, WD livehub and the SPA).i am able to use Skype on my TV which so i think the LAN connection is working for the TV one. 

i am using the Orcon homehub sx763 as my router. no changes was made to my SPA or router configuration but simply a restart. so anyone can advise how can i sort this out would be appreciated. below is the screen of the LAN setting in my SPA, let me know if you need me to upload any screenshots.  


Create new topic
19290 posts

Uber Geek
+1 received by user: 1159

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 580083 11-Feb-2012 09:26 Send private message

If you're getting a dialtone with no LINE1 light on you clearly have a long standing configurtrion issue with your SPA (probably enable call without reg enabled). You shouldn't have a dialtone with no SIP registration.

You'll also need to explain your network setup as you shouldn't have anything plugged into the LAN port of the SPA3102 if it's behind an existing router and you're using NAT on the SPA3102. This means every device behind the SPA3102 has double NAT.

Have you had the SIP ALG disabled by Orcon?




93 posts

Master Geek


  Reply # 580084 11-Feb-2012 09:27 Send private message

dont worry guys, after i restart the router again, it is working now



93 posts

Master Geek


  Reply # 580629 12-Feb-2012 23:27 Send private message

Thanks Sbiddle, not sure i am using NAT, was told to do it when i had problem setting up my voip initially from geekzone by someone. it is now working so i might just leave it as is.. i am however having another question..

i am trying to use a 2nd line on my SPA which rout via a long extension cable to my downstairs flat. i have got the GN from 2talk and registered from them the interface but cant hear any dial tone.

i have following all set up for my line2 as line1 except the port is automatically set to 5061 while line 1 is using 5060, from the status below i cant see any problem.. i am not sure if i have done something wrong in wiring. what i have done is: i use a RJ11 to BT cable with one side go to the SPA and the other side plug to a extension cable, i cut the BT end of the extension cable and connect it to a wall jack which i use the red in slot 3 and green in slot 4 (black,red,green,yellow) . please would you help? many thanks..

Line 1 Status
Hook State: On Registration State: Registered
Last Registration At: 2/12/2012 22:14:44 Next Registration In: 590 s
Message Waiting: Yes Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:

Line 2 Status
Hook State: On Registration State: Registered
Last Registration At: 2/12/2012 22:14:45 Next Registration In: 3566 s
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number:
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Type: Call 2 Ty

BDFL
49213 posts

Uber Geek
+1 received by user: 4180

Administrator
Trusted
Geekzone
Subscriber

  Reply # 580657 13-Feb-2012 08:16 Send private message

shaopu: i am trying to use a 2nd line on my SPA which rout via a long extension cable to my downstairs flat. i have got the GN from 2talk and registered from them the interface but cant hear any dial tone.

i have following all set up for my line2 as line1 except the port is automatically set to 5061 while line 1 is using 5060, from the status below i cant see any problem.. i am not sure if i have done something wrong in wiring. what i have done is: i use a RJ11 to BT cable with one side go to the SPA and the other side plug to a extension cable, i cut the BT end of the extension cable and connect it to a wall jack which i use the red in slot 3 and green in slot 4 (black,red,green,yellow) . please would you help? many thanks..


You should test Line 2 WITHOUT the extension with the handset and cord from Line 1. If it works then you know it's the extension cable. If it doesn't work then you know it's the configuration.
 






93 posts

Master Geek


  Reply # 580773 13-Feb-2012 11:44 Send private message

oh right, thanks . will test that tonight



93 posts

Master Geek


  Reply # 581800 15-Feb-2012 13:03 Send private message

have tested without the extension line and it works fine... so issue looks like either the extention line or the phone jeck connection...

Create new topic




Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Lightbox press event release
Created by freitasm, last reply by nigelj on 2-Aug-2014 14:09 (142 replies)
Pages... 8 9 10


New Mobile plans coming?
Created by nunasdream, last reply by kawaii on 2-Aug-2014 11:36 (109 replies)
Pages... 6 7 8


Are IT staff supposed to know everything
Created by BTR, last reply by KiwiNZ on 2-Aug-2014 15:22 (46 replies)
Pages... 2 3 4


2010 Honda Jazz, Suzuki Swift - which has higher maintenance cost?
Created by joker97, last reply by jonathan18 on 31-Jul-2014 10:47 (76 replies)
Pages... 4 5 6


Somewhat nice convertable/similar that doesnt look like a ladies car?
Created by richms, last reply by KiwiNZ on 2-Aug-2014 16:22 (35 replies)
Pages... 2 3


Does acupuncture work?
Created by timmmay, last reply by timmmay on 1-Aug-2014 19:22 (52 replies)
Pages... 2 3 4


"keyless" keys - questions
Created by joker97, last reply by MadEngineer on 30-Jul-2014 22:02 (35 replies)
Pages... 2 3


Google Launcher now available to Android 4.1 devices and up
Created by freitasm, last reply by LazyDr on 2-Aug-2014 16:19 (15 replies)


Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.