Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.



55 posts

Master Geek


Topic # 107825 20-Aug-2012 15:10 Send private message

Hi to all,
I am currently updating my VoIP box to Elastix 2.3 from 1.6 and upon trying to register the VfX trunks it fails. I am using the exact same settings as the old machine. Does anyone know what has changed between versions? Here is my current setting...

username=XXXX
type=peer
secret=XXXX
regseconds=180
registertimeout=20
port=5060
host=pan.wxnz.net
dtmfmode=rfc2833
disallow=all
allow=g729&ulaw&alaw


USER Context : my phone nr without zero

username=XXXX
type=peer
secret=XXXXX
nat=yes
insecure=invite,port
host=pan.wxnz.net
fromuser=my phone nr without zero
context=from-trunk
canreinvite=no


Registrtation string : phonenr:XXXX:[email protected]/phonenr

Thank you in advance for the excellent help I have always got in this forum! :)
Chris

Create new topic
19277 posts

Uber Geek
+1 received by user: 1153

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 674673 20-Aug-2012 17:18 Send private message

You don't need both trunk and user fields - just leave the data in the trunk field.

There was also a small gripe with FreePBX at one stage that needed disallow at the top of the entry field, no idea if this still is the case because I always have it at the top anyway.

3519 posts

Uber Geek
+1 received by user: 815

Trusted
Subscriber

  Reply # 674676 20-Aug-2012 17:29 Send private message

Sometimes when changing open VFX hardware / setup, the old config can be stuck registered. Leave off overnight and see if it kicks in tomorrow.




Chorus has spent $1.4 billion on making their ADSL broadband network faster. Why not spend a couple of hundred to make sure you are getting the most out of your connection?
Geekzone special price: $150* for master splitter install, normally $200+ through your ISP. Auckland and Waikato areas.
*Travel charges may apply. Additional costs may apply for complex installs.
I install - Naked DSL, DSL Master Splitters, VoIP, RBI Rural Broadband. Also a dealer for WorldxChange.
Need help in Auckland or Waikato? Click my email button, or email me direct: [my user name] at geekzonemail dot com



55 posts

Master Geek


  Reply # 674950 21-Aug-2012 09:14 Send private message

@sbiddle... I have used this configuration on the server for almost two years now, so I don't think that will solve it... I will give it a go though...
@coffeebaron I have two VfX numbers and registered one with a softphone (the one I needed to keep active while playing around with the new server) and was trying to register the other on the server. The softphone worked immediately, but the Elastix didn't.

I will try playing around a bit more with the settings, thank you both for your replies...



55 posts

Master Geek


  Reply # 675504 22-Aug-2012 15:01 Send private message

Sorted...
I needed to change type=peer to type=user and it now works. Oh, and to make it clear, I had registered the trunk, I only couldn't get incoming calls, although outgoing worked fine...
I am no Asterisk expert, so can someone roughly please explain why this is happening?

And I also deleted the stuff in the user field, made no difference, thanks @sbiddle for making it simpler ;)



55 posts

Master Geek


  Reply # 675525 22-Aug-2012 16:03 Send private message

OK,
I THOUGHT it was sorted. As soon as I changed to type=user I lost the ability to make calls from the trunk...
So no it is either type=peer and I can make calls but not receive, or type=user and I can receive but not make calls!

Any help greatly appreciated.. :)

Create new topic




Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Lightbox press event release
Created by freitasm, last reply by old3eyes on 1-Aug-2014 19:20 (128 replies)
Pages... 7 8 9


Are IT staff supposed to know everything
Created by BTR, last reply by TwoSeven on 1-Aug-2014 19:37 (39 replies)
Pages... 2 3


New Mobile plans coming?
Created by nunasdream, last reply by ubernoob on 1-Aug-2014 19:41 (106 replies)
Pages... 6 7 8


Checking UHF aerial is working
Created by OnceBitten, last reply by B1GGLZ on 28-Jul-2014 21:49 (21 replies)
Pages... 2


2010 Honda Jazz, Suzuki Swift - which has higher maintenance cost?
Created by joker97, last reply by jonathan18 on 31-Jul-2014 10:47 (76 replies)
Pages... 4 5 6


New shave shop
Created by tehgerbil, last reply by tehgerbil on 1-Aug-2014 19:43 (18 replies)
Pages... 2


Hierarchy of a mistake: Gerry Brownlee
Created by joker97, last reply by DonGould on 29-Jul-2014 21:57 (93 replies)
Pages... 5 6 7


Does acupuncture work?
Created by timmmay, last reply by timmmay on 1-Aug-2014 19:22 (52 replies)
Pages... 2 3 4



Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.