Android 2.1 VOIP SIP Working with Xnet VFX

outdoorsnz

10 posts

Wannabe Geek

Topic # 87877 9-Aug-2011 13:47
Hi All, Has anybody managed to get open VFX VOIP phone service working on android 2.1? My phone is a garmin asus A10. I have tried SipDroid unsuccessfully. After entering registration details, I get a error message that says Registration failed (401 Unauthorized). Any help appreciated. Thanks Regards Scott

16716 posts

Uber Geek

Moderator

Trusted

Biddle Corp

Subscriber

Reply # 504046 9-Aug-2011 19:55
Do you have you SIP userid and AuthID in the correct fields? Assuming of course that the software supports AuthID - some don't. *Need help configuring your Linksys ATA or IP Phones for New Zealand? Check my blog post

10 posts

Wannabe Geek

Reply # 504875 11-Aug-2011 10:47
Not supporting AuthID might be the issue. I have tried SipDroid and 3CX. 3CX says it has Auth ID support, so I am wondering if it is a issue with my WXC sip profile? For the user I have used the given phone number, for the ID I have used the big long username. The error message is Not Registered. Thanks Regards Scott

3452 posts

Uber Geek

Trusted

WorldxChange

Reply # 504888 11-Aug-2011 11:10
Any soft-phone must support separate user and authid fields , the user id will be your phone number with out the 0, the authid is the really long one :), as is the password Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well

10 posts

Wannabe Geek

Reply # 504896 11-Aug-2011 11:18
Have got the login details in the correct place, still not registered message. I know this number does work as it works on my mac fine. Could it be the server settings? I have Use External Server ticked. Internal server is blank. External Server is set to: pan.wxnz.net Port?: 5060 Stun server is: stun3.3cx.com (as default) In the advance settings I have tried setting the proxy as pan.wxnz.net. Thanks

198 posts

Master Geek

Trusted

WorldxChange

Reply # 505407 12-Aug-2011 11:41
I installed this on a colleagues phone running android 2.3 and the 3CX client from the google marketplace, I was able to register and place calls out. Looking at the last few registers you sent us yesterday, the authID you are using is incorrect, you are sending through a lower case l instead of an upper case I between a and the s, fix that up and I think you should be ok :) Cheers Josh http://www.xnet.co.nz http://www.xnet.co.nz/vfx

2772 posts

Uber Geek

Trusted

Subscriber

Reply # 505426 12-Aug-2011 12:00
Any chance you could post the settings (without user id obviously) ?

10 posts

Wannabe Geek

Reply # 505432 12-Aug-2011 12:08
Hi Josh, Awesome! Thanks for that. I had read the I as L. A lowercase l looks the same as uppercase I. Works in both SipDroid and 3cx. Now just need to get the sound working. Thanks Regards Scott