Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3


765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 593926 12-Mar-2012 10:10 Send private message

No joy. Looks like reset needed. Customer has been taking notes on how to reset etc . May try otherwise a call past again tonight!

3551 posts

Uber Geek
+1 received by user: 60

Trusted
WorldxChange

  Reply # 594129 12-Mar-2012 13:49 Send private message

Yes we didn't see it phone home after a power cycle which were were hoping for , we were hoping the config profile details were okay and a power cycle would force it to update, but the corrupted profile downloaded looks to have stopped that so only a factory default should address this, Again Andy our apologies to you as well as the custy for this but hopefully this should work for you now.

We have had a couple of these today and both are working correctly.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 594233 12-Mar-2012 16:46 Send private message

maverick: Yes we didn't see it phone home after a power cycle which were were hoping for , we were hoping the config profile details were okay and a power cycle would force it to update, but the corrupted profile downloaded looks to have stopped that so only a factory default should address this, Again Andy our apologies to you as well as the custy for this but hopefully this should work for you now.

We have had a couple of these today and both are working correctly.


Ok talked to customer they have reset and redone all settings. And still no go. When she looked at the provisioning string(before she did the reset) and it was not there.This was submitted and saved every time we did the re install of settings. So why is this provisioning string gone??
Kind of at the end of it now. Maybe we have faulty box? We need to get this sorted before the number port happens.
WXC will have to provide more support for there customer now to solve this issue. The average(used to telecom"it just works")punter would be starting to lose it by now so plan B is now required.

3551 posts

Uber Geek
+1 received by user: 60

Trusted
WorldxChange

  Reply # 594244 12-Mar-2012 17:02 Send private message

andrewcnz:
maverick: Yes we didn't see it phone home after a power cycle which were were hoping for , we were hoping the config profile details were okay and a power cycle would force it to update, but the corrupted profile downloaded looks to have stopped that so only a factory default should address this, Again Andy our apologies to you as well as the custy for this but hopefully this should work for you now.

We have had a couple of these today and both are working correctly.


Ok talked to customer they have reset and redone all settings. And still no go. When she looked at the provisioning string(before she did the reset) and it was not there.This was submitted and saved every time we did the re install of settings. So why is this provisioning string gone??
Kind of at the end of it now. Maybe we have faulty box? We need to get this sorted before the number port happens.
WXC will have to provide more support for there customer now to solve this issue. The average(used to telecom"it just works")punter would be starting to lose it by now so plan B is now required.


We will look at this directly with the customer, generally this just works but as said unfortunately Cisco elected to put new hardware in the market before we even had the boxes to run through our interop testing so we are playing catchup especially sine this has a totally new firmware and configuration requirements.

In saying that we will do our best to resolve the issue asap.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 594246 12-Mar-2012 17:05 Send private message

So someone will call them ? Tonight ?

169 posts

Master Geek
+1 received by user: 9


  Reply # 594289 12-Mar-2012 18:36 Send private message

Just spoke to them and it seems to be up and running now, hopefully will stay that way :)



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

Reply # 594292 12-Mar-2012 18:41 Send private message

andrewcnz: So someone will call them ? Tonight ?


Looks like WXC have rung them and solved issue,good work.

3551 posts

Uber Geek
+1 received by user: 60

Trusted
WorldxChange

  Reply # 594294 12-Mar-2012 18:43 Send private message

grudge: Just spoke to them and it seems to be up and running now, hopefully will stay that way :)


Nice work Andrei Wink




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 594296 12-Mar-2012 18:43 Send private message

grudge: Just spoke to them and it seems to be up and running now, hopefully will stay that way :)


Thanks. What did we do wrong if anything? 

3551 posts

Uber Geek
+1 received by user: 60

Trusted
WorldxChange

  Reply # 594299 12-Mar-2012 19:14 Send private message

Nothing too much Andrew, would love to say it was something really technical but according to Andrei from our tech support team , just another factory default getting ready to setup remote access appears to have fixed the issue, the device phoned home and all good once it did.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 598048 21-Mar-2012 08:55 Send private message

Now customer is waiting for number port to happen. Was ment to be last week more delays.



765 posts

Ultimate Geek
+1 received by user: 1

Subscriber

  Reply # 600670 27-Mar-2012 12:46 Send private message

Numbers ported now no phones at all. Wow what a joke. A problem at every step. Very bad.

2743 posts

Uber Geek
+1 received by user: 25

Trusted

  Reply # 600792 27-Mar-2012 15:49 Send private message

Tried a reboot so the box will pick up the new number? Just asking.




You can never have enough Volvos!


204 posts

Master Geek
+1 received by user: 1

Trusted
WorldxChange

  Reply # 600889 27-Mar-2012 18:36 Send private message

Hi Andrew,

Firstly apologies for the issues today, as you are aware this is a completely new hardware set from Cisco and caught us off guard a little, in saying that we have since knowing about the hardware had numerous discussions with Ciso about the changes involved and what was causing your customers issues, we have since implemented new provisioning systems to cater for the device but because this device was a custom build when our automated system kicked off the number port all of the changes were lost.

As far as I am aware the customer is now working correctly and is set in our provisioning system so any further changes should not result in the same fault occuring.  Feel free to PM me if this is not the case.

Regards

Josh




3551 posts

Uber Geek
+1 received by user: 60

Trusted
WorldxChange

  Reply # 600900 27-Mar-2012 18:43 Send private message

andrewcnz: Numbers ported now no phones at all. Wow what a joke. A problem at every step. Very bad.


No not a joke at all and as I explained previously this unit was a completely different model with firmware and hardware that hit the stores and into customers premises without our knowledge the normal provisioning process did not work at all and caused the issues described here, in this customers case we had to get them provisioned on the fly as they were the first one we had seen which we did.

We also had to then run every thing through our normal testing procedures and provisioning process as the provisioning model changed completly with this new unit, we have done that but unfortunatly as this was the very first one it was missing a part of the config regeneration when it comes to porting as it was done as a manual process to get them working, now you may wish to call it a joke but a huge amount of time and effort goes into making this pretty much seamless for most users which you will never see and mostly this occurs , unfortunately as I said this customer was the first one and had / has some complications because of it and we will fix their issues as soon as we can with our apologies, but rest assured no one at WxC thinks this is joke and generally if things don't work there are mitigation factors which I think you should take into account.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

1 | 2 | 3
View this topic in a long page with up to 500 replies per page Create new topic








Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when new jobs are posted to our jobs board:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Telecom introduces unlimited broadband data plan
Created by freitasm, last reply by NonprayingMantis on 25-Apr-2014 12:17 (111 replies)
Pages... 6 7 8


Stonedine
Created by Lizard1977, last reply by mattwnz on 24-Apr-2014 15:45 (67 replies)
Pages... 3 4 5


Windows 8 System Mechanics
Created by eme, last reply by eme on 24-Apr-2014 21:10 (20 replies)
Pages... 2


Using my Mac to ring family in the UK
Created by Geektastic, last reply by nakedmolerat on 24-Apr-2014 11:28 (19 replies)
Pages... 2


Telecom has started metering their TiVo customers' broadband usage (WITHOUT PRENOTIFICATION)
Created by Peteriv, last reply by mattwnz on 24-Apr-2014 15:11 (74 replies)
Pages... 3 4 5


Parallel imported product
Created by Wills1, last reply by joker97 on 23-Apr-2014 21:01 (53 replies)
Pages... 2 3 4


MH370 - Call for Search & Rescue Help
Created by DS248, last reply by Technofreak on 25-Apr-2014 12:10 (749 replies)
Pages... 48 49 50


Forms of government for New Zealand
Created by charsleysa, last reply by Sidestep on 25-Apr-2014 10:00 (179 replies)
Pages... 10 11 12



Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.