Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7
483 posts

Ultimate Geek

Trusted

  Reply # 262016 7-Oct-2009 12:40 Send private message

Ahh - sorry didn't realise you were Australian... I'll remember to speak really slowly from now on :)

Yea - it does nothing in this part of the world. I believe its of use when changing between multiple providers (especially in europe where they see many hundreds of channels). It speeds up the selection process and allows for faster channel changes and decoding, especially where multiple cards/encryption standards are used.

In essence with either Foxtel or Sky NZ these are simply a single provider - channel change speeds aren't really an issue.

The only files you need in the plugins folders are the ACamd.dll, and the cardclient.conf.

Once you run it, it will generate its own Acamd.ini file, and also the chcache.ini file, once its connected to NewCS.


74 posts

Master Geek


  Reply # 262022 7-Oct-2009 12:53 Send private message

>Line removed - Too nasty...I take it back<


That's interesting about Acamd. So, basically I can get rid of all the extra lines, files, etc without it adversley affeting the operation. Not that it's actually operated, yet.

Thanks, Rusty.

Much appreciated.

483 posts

Ultimate Geek

Trusted

  Reply # 262039 7-Oct-2009 13:36 Send private message

Yep - so all the cardclient.conf needs is something like the following, nothing else:

newcamd:192.168.1.xxx:15000:0/096A/ffff:username:password:0102030405060708091011121314

For your side of the ditch you'll need to change the 096A to 096x (I think its 0963 for Foxtel - don't quote me on that), and adjust the IP address accordingly ie localhost, or 127.0.0.1 etc etc.

However - like I said that will only work once NewCS has actually read/initialised your card- which based on the logs you provided it hasn't - and they look exactly like the card detection error a few of us have had in the past with NewCS 1.65.

If you get really stuck, one way to check the reader is to use DVBViewer and NDSCAM 0.0.0.7 - this works out of the box on nearly anything.

Cheers,


74 posts

Master Geek


  Reply # 262043 7-Oct-2009 13:42 Send private message

Where would I find the provider ID?

I've done a google search and nothing comes up

483 posts

Ultimate Geek

Trusted

  Reply # 262075 7-Oct-2009 15:00 Send private message

Once you get NewCS going, if you have a look in the web console (http://x.x.x.x:8080 is the default port), on the "Readers" tab, you will see it listed under CAID - which is the provider ID.

It will also list it in the pile of stuff it outputs once it correctly reads your card.


74 posts

Master Geek


  Reply # 262290 8-Oct-2009 00:56 Send private message

Ok, I think I'm a bit closer.

I got this now:-
Unable to set requested window size
Unable to set requested window size
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:54:08
Reading Config file from newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 16:37:30 ] [ Box detect ] Windows Vista Build 7600
[ 16:37:30 ] [ Config ] Pincode for device 0 (Phoenix on COM1): 0000
[ 16:37:30 ] [ Config ] COM1 ECM priority: fifo
[ 16:37:30 ] [ EMM Cache ] Initialising dynamic Cache
[ 16:37:30 ] [ ECM Cache ] Initialising dynamic Cache
[ 16:37:30 ] [ Loader ] Starting Telnet on port 1001
[ 16:37:30 ] [ Loader ] Reader type 2 on node COM1
[ 16:37:30 ] [ Phoenix ] Opening device COM1
[ 16:37:30 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:37:30 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 16:37:30 ] [ Phoenix ] Setting baud to 9600
[ 16:37:32 ] [ ATR ] T=0 1etu=104.17us Guardtime:15etu WWT:9600etu
[ 16:37:32 ] [ ATR ] Historical bytes: 3 [B0] [09] i [FF] J P p [00] [00] F D [01] [00] [00]
[ 16:37:32 ] [ Loader ] Init NDS card
[ 16:37:32 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:37:32 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 16:37:32 ] [ Phoenix ] Setting baud to 9600
[ 16:37:33 ] [ KeymaN ] Adding key 3D41DE type 0 on Provider 000000 for caid 090B ID=0
[ 16:37:33 ] [ KeymaN ] Adding key 3D4100 type 1 on Provider 000000 for caid 090B ID=0
[ 16:37:35 ] [ Loader ] Card 090B on port COM1 ready
[ 16:37:35 ] [ Loader ] Starting Newcamd Server on port 15000
[ 16:37:35 ] [ Newcamd ] Newcamd thread Server started on port 15000
newcamd: main loop
des_decrypt: bad len ?
[ 16:37:35 ] [ Newcamd:15000 ] Can't decrypt client msg, rejecting!
[ 16:37:35 ] [ Newcamd:15000 ] User tuner1 logout

Would the failure to decrypt have to do with the provider ID?

241 posts

Master Geek
+1 received by user: 1


  Reply # 262293 8-Oct-2009 02:42 Send private message

I think that you are there. If you leave Newcs runing like that then start a DVBViewer instance and tune to an encrypted channel the "user" will log in again.

[edit] 090B is the caid you will need to set in your acamd cardclient.conf line 

74 posts

Master Geek


  Reply # 262339 8-Oct-2009 10:51 Send private message

Mattv: I think that you are there. If you leave Newcs runing like that then start a DVBViewer instance and tune to an encrypted channel the "user" will log in again.

[edit] 090B is the caid you will need to set in your acamd cardclient.conf line 


Cool!

How long should it take to display the channel?

483 posts

Ultimate Geek

Trusted

  Reply # 262344 8-Oct-2009 11:02 Send private message

Less than a second...

74 posts

Master Geek


  Reply # 262375 8-Oct-2009 12:09 Send private message

This is correct?

newcamd:localhost:15000:0/090B/ff00:user:password:0102030405060708091011121314

241 posts

Master Geek
+1 received by user: 1


  Reply # 262402 8-Oct-2009 14:09 Send private message

tbergman: This is correct?

newcamd:localhost:15000:0/090B/ff00:user:password:0102030405060708091011121314


That should probably do it. Using your caid my line would look like this

newcamd:localhost:15000:0/090B/ffff:user:password:0102030405060708091011121314

ie only the mask is changed but I think for our purpose either would work. (and no, don't ask me what the mask does!)

74 posts

Master Geek


  Reply # 262624 9-Oct-2009 08:56 Send private message

YEEEHHAAAA!!!

Got it working!

Now, I just need to tidy up the channel numbers and set up EPG.  And back up the drive.

Must really thank, Rustygonad, Mattv, Argo and everyone else who shared their knowledge. If it's ok with everyone, I might put together a tutorial (i.e. idiots guide).



87 posts

Master Geek
+1 received by user: 1


  Reply # 263325 11-Oct-2009 20:29 Send private message

Congrats!! Good news indeed.

And to state the obvious - Now you just need to make sure you've got a good set of notes to refer back to and a HDD image if something "really bad" happens (which recently happened to me Frown).


Re: the guide - feel free to use anything I've submitted. Where relevant it would be best to spell out where you refer to an Oz setup, NZ or generic. Otherwise there could be some confusion Wink

267 posts

Ultimate Geek
+1 received by user: 13


  Reply # 263365 11-Oct-2009 22:30 Send private message

a guide would be phenominal.

a lot of people say they will make one (after they succesfully got it working ;) ), but to date no one has actually done one (?).

74 posts

Master Geek


  Reply # 263432 12-Oct-2009 10:15 Send private message

argo: Congrats!! Good news indeed.

And to state the obvious - Now you just need to make sure you've got a good set of notes to refer back to and a HDD image if something "really bad" happens (which recently happened to me Frown).


Re: the guide - feel free to use anything I've submitted. Where relevant it would be best to spell out where you refer to an Oz setup, NZ or generic. Otherwise there could be some confusion Wink


Thanks Argo,

Hopefully I can put something together that will benefit as many people as possible.  This took me over a year to sort out and the end result is brilliant.  Even tha WAF has improved.

Phase two is putting in a dual LNB and a second DVB-S tuner.

1 | 2 | 3 | 4 | 5 | 6 | 7
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Moment of Truth?
Created by BarTender, last reply by Technofreak on 18-Sep-2014 09:41 (321 replies)
Pages... 20 21 22


10 Iphone 128gb 6+ iphones this weekend at auckland airport
Created by frysie, last reply by TimA on 17-Sep-2014 22:02 (36 replies)
Pages... 2 3


Mr. Key to extradite Kim Dotcom?
Created by TimA, last reply by SaltyNZ on 18-Sep-2014 09:20 (126 replies)
Pages... 7 8 9


Spark DNS Issues - Amazing - Broadband Service Alert
Created by PeteS, last reply by Demeter on 15-Sep-2014 14:13 (307 replies)
Pages... 19 20 21


hp bios update
Created by foxy38, last reply by foxy38 on 14-Sep-2014 19:08 (26 replies)
Pages... 2


Linksys EA6700 $98 at Harvey Horman
Created by macuser, last reply by macuser on 16-Sep-2014 15:18 (18 replies)
Pages... 2


Gigatown finalists and retail provider
Created by freitasm, last reply by macuser on 17-Sep-2014 23:02 (17 replies)
Pages... 2


2014 Holden SS (V8) or Ford XR6-T (in-line 6 turbo)
Created by joker97, last reply by ilovemusic on 16-Sep-2014 14:34 (71 replies)
Pages... 3 4 5



Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.