Samsung Galaxy S3 firmware updates

Forums › 2degrees › Samsung Galaxy S3 firmware updates

1 | ... | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17

389 posts

Ultimate Geek

Reply # 734061 18-Dec-2012 07:42
jayteebee: menabassily: jayteebee: menabassily: jayteebee: menabassily: johnr: Not always but when issues happen it helps, I have done the backup and reset. Still stops at 25% and says update failed :( Time to flash 4.1.2 I wish I could, I need the snapper Touch2Pay thing to work. God damn it 2degrees!! Ok, I have reset and tried 4 times now. I have flashed the old 2degrees official rom and it has done the 20 MB update, will try again now and see. Otherwise I will take it to the shop and get them to deal with it. Step1 grab your siii Step2 grab a snapper card Step3 put snapper car on back of phone Step4 put a case over the phone and card Presto latest os Fully functioning on the 2degrees network Able to snap on and off the bus with your phone Problem.solved Is that with Android 4.1.2 ?? which Rom are you talking about? Polish international rom which is the premium suite, look it up.if your curious. The polish rom was intended for westurn.europe and england It doesn't include the SIM Alliance API, but, as a developer I found a way to INJECT that API into my android 4.1.2, and I can do this for any ROM as long as you have root access. It's working now :) Muahahahahahahahahhaa Kiwinized geek

jayteebee

17 posts

Geek

Reply # 734062 18-Dec-2012 07:49
menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked

sbiddle

16843 posts

Uber Geek

Moderator

Trusted

Biddle Corp

Subscriber

Reply # 734063 18-Dec-2012 07:53
jayteebee: menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked THey are two totally different things. You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this. To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release. *Need help configuring your Linksys ATA or IP Phones for New Zealand? Check my blog post

menabassily

389 posts

Ultimate Geek

Reply # 734068 18-Dec-2012 08:00
sbiddle: jayteebee: menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked THey are two totally different things. You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this. To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release. That's 100% true, however, I have fixed both issues, installed the app and the API :D Kiwinized geek

menabassily

389 posts

Ultimate Geek

Reply # 734069 18-Dec-2012 08:00
jayteebee: menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked I am still learning how to use them. quite nice Kiwinized geek

lokhor

2151 posts

Uber Geek

Trusted

Reply # 734084 18-Dec-2012 08:24
menabassily: sbiddle: jayteebee: menabassily: Cool, so the polish one has the Sim alliance API needed for 2degrees Touch2Pay? Say yes and I'll flash it right now :D Well done, injoy split screen and the voice equalizer app, the smart screens too there wicked THey are two totally different things. You can install the Snapper app on a large number of phones that have NFC and will be able to read a card balance with this. To be able to use your phone as a Snapper card you need the API installed, which is not part of the Polish release. That's 100% true, however, I have fixed both issues, installed the app and the API :D Any Chance you could sharehow you did it? Current Devices: Samsung Galaxy S3 Old Devices: SGS I9000, HTC Sensation, SGSII I9100, Asus Transformer Associate Editor-in-Chief for AndroidNZ.net TelecomTech is a sponsored blog reviewing the latest in communications technology. All comments are my own opinion, and not that of my employer unless explicitly stated.

DoggNZ

432 posts

Ultimate Geek

Reply # 734087 18-Dec-2012 08:34
menabassily:It doesn't include the SIM Alliance API, but, as a developer I found a way to INJECT that API into my android 4.1.2, and I can do this for any ROM as long as you have root access. It's working now :) Muahahahahahahahahhaa Explain more! Samsung Galaxy S III GT-i9300 - Running SuperNexus 2.0 Milestone 1 Samsung Galaxy S II GT-i9100 - Running SuperNexus 2.0 Build 3 - Now belongs to GF http://wellymtb.blogspot.co.nz/

menabassily

389 posts

Ultimate Geek

Reply # 734136 18-Dec-2012 09:48
I have the file "APK", you need to copy it to the System\app folder and change its permission then restart. Using Root explorer. It's called"org.simalliance.openmobileapi.service-99b2b5405248e780c1e99648b792d8f4.apk" which is also called "SmartCardService" Kiwinized geek

menabassily

389 posts

Ultimate Geek

Reply # 734140 18-Dec-2012 09:52
It worked perfectly for sometime, now for some reason it has stopped working again :@ Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr Kiwinized geek

DoggNZ

432 posts

Ultimate Geek

Reply # 734181 18-Dec-2012 10:51
menabassily: It worked perfectly for sometime, now for some reason it has stopped working again :@ Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr Permissions? Are you able to host it somewhere? Samsung Galaxy S III GT-i9300 - Running SuperNexus 2.0 Milestone 1 Samsung Galaxy S II GT-i9100 - Running SuperNexus 2.0 Build 3 - Now belongs to GF http://wellymtb.blogspot.co.nz/

Neiljd55

20 posts

Geek

Reply # 734226 18-Dec-2012 11:49
4.1.1 finally here..Great. Now on to the next one 4.1.2 What I want is Multi View. The 4.1.1 firmware CSC NZCDLK3 is on sammobile. Under the details, lists the regions Austria Belgium France etc for this CSC. The Polish 4.1.2 lists the same regions as our 4.1.1 does. Does the mean I can flash the 4.1.2 with no worries and problems and it will work fine on 2D. Thanks for any and all replies

sbiddle

16843 posts

Uber Geek

Moderator

Trusted

Biddle Corp

Subscriber

Reply # 734229 18-Dec-2012 11:52
Neiljd55: 4.1.1 finally here..Great. Now on to the next one 4.1.2 What I want is Multi View. The 4.1.1 firmware CSC NZCDLK3 is on sammobile. Under the details, lists the regions Austria Belgium France etc for this CSC. The Polish 4.1.2 lists the same regions as our 4.1.1 does. Does the mean I can flash the 4.1.2 with no worries and problems and it will work fine on 2D. Thanks for any and all replies Should work, but if you're going to do these sorts of things you need to to be wary of turning your phone into an expensive brick. There was a thread on here a few days ago from somebody who has unfortunately bricked their phone with the Polish firmware. *Need help configuring your Linksys ATA or IP Phones for New Zealand? Check my blog post

jayteebee

17 posts

Geek

Reply # 734262 18-Dec-2012 12:29
2degrees and vodafone update are the same thats why they were pushed out at the same time Ap: i9300xxdlk1 Cp: i9300xxdlif Csc: i9300vnzdll1

Neiljd55

20 posts

Geek

Reply # 734302 18-Dec-2012 13:18
jayteebee: 2degrees and vodafone update are the same thats why they were pushed out at the same time Ap: i9300xxdlk1 Cp: i9300xxdlif Csc: i9300vnzdll1 Is yours vodafone? My 2D says AP I9300XXDLK1 CP I9300XXDLID CSC I9300NZCDLK3

jayteebee

17 posts

Geek

Reply # 734378 18-Dec-2012 15:18
Mine is a dse sourced 2degrees model, is yours purchaced through 2degrees or do you just use there network

1 | ... | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17