Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 
700 posts

Ultimate Geek
+1 received by user: 12


  Reply # 718972 18-Nov-2012 09:02 Send private message

sbiddle: Both VF and Telecom have sites pretty close to The Square in Martinborough.


Ah ok I though it was on the hill on the side of town as I have been able to pickup Vodafones Martinborugh tower in Greytown, unless there is more than 1 of course.



624 posts

Ultimate Geek
+1 received by user: 64

Subscriber

  Reply # 718975 18-Nov-2012 09:32 Send private message

Publius: naggyman, are you saying there's a third 2d tower in Masterton?


There is two, but I seem to only be seeing one. I am not exactly sure where it is. I will try actually installing google earth and trying it again (Instead of using Google Maps).




195 posts

Master Geek
+1 received by user: 2


  Reply # 718979 18-Nov-2012 09:41 Send private message

naggyman:
Publius: naggyman, are you saying there's a third 2d tower in Masterton?


There is two, but I seem to only be seeing one. I am not exactly sure where it is. I will try actually installing google earth and trying it again (Instead of using Google Maps).


Google Maps has a limit on the number of points it can display which this KML exceeds.
Interestingly Google Earth for Android can display all the points which surprised me when I tested it.



624 posts

Ultimate Geek
+1 received by user: 64

Subscriber

  Reply # 718981 18-Nov-2012 09:46 Send private message

I thought that that may have been the case. There is quite a few cells not shown on there.






624 posts

Ultimate Geek
+1 received by user: 64

Subscriber

  Reply # 718982 18-Nov-2012 09:47 Send private message

I just wish that Bartender would update his maps with google fusion tables. He did such a great job and it is sad to have it left without updating.




195 posts

Master Geek
+1 received by user: 2


  Reply # 719234 18-Nov-2012 23:52 Send private message

naggyman: I just wish that Bartender would update his maps with google fusion tables. He did such a great job and it is sad to have it left without updating.


Indeed, I used to regularly consult Bartenders maps also but as you say they are very much out of date now.

I've now made my own website map.geek.nz which has a google fusion map with all the points (no limit). Its still got some work to be done but its at the point where some here might find it useful.



624 posts

Ultimate Geek
+1 received by user: 64

Subscriber

  Reply # 719253 19-Nov-2012 07:31 Send private message

Wow Publis. This is great! You have a good domain for it. We should intergrate other maps (Such as http://markhansen.co.nz/nz-wireless-map/ http://wirelessmap.markhansen.co.nz/). All that I am hoping is that you keep this site up to date. I can even offer some free processing on my Raspberry Pi if you'd like :)




1327 posts

Uber Geek
+1 received by user: 6

Trusted

  Reply # 719971 20-Nov-2012 10:37 Send private message

naggyman: I just wish that Bartender would update his maps with google fusion tables. He did such a great job and it is sad to have it left without updating.


My bad on that :(

I set it up as a automated script to update the fusion table every week after pulling down the RSM Database and munging it into the right kind of data.

But it seemed to have got broken months ago with the move to google drive or something like that.

Just re-ran it and updated it.

Feel free to slap me up side the head if I forget about it or it stops working again.




Check out my Mobile Cell Site Google Maps KML Files in my blog.
Now using Google Fusion Tables or Address Lookup or GPS using Smartphone
I update it on a monthly basis automatically from RSM.

1774 posts

Uber Geek
+1 received by user: 97

Trusted

  Reply # 719973 20-Nov-2012 10:40 Send private message

BarTender:
naggyman: I just wish that Bartender would update his maps with google fusion tables. He did such a great job and it is sad to have it left without updating.


My bad on that :(

I set it up as a automated script to update the fusion table every week after pulling down the RSM Database and munging it into the right kind of data.

But it seemed to have got broken months ago with the move to google drive or something like that.

Just re-ran it and updated it.

Feel free to slap me up side the head if I forget about it or it stops working again.


Thats a huge update, looks tons better!

Edit: seems to be a lot missing, esp Telecom. Also the other map I saw in a previous post showed a few 2degrees towers in coastal taranaki where this one doesn't... (unless 2degrees changed their mind?)

1327 posts

Uber Geek
+1 received by user: 6

Trusted

  Reply # 719999 20-Nov-2012 11:26 Send private message

DjShadow: Thats a huge update, looks tons better!

Edit: seems to be a lot missing, esp Telecom. Also the other map I saw in a previous post showed a few 2degrees towers in coastal taranaki where this one doesn't... (unless 2degrees changed their mind?)


Ahh I see Telecom have done a sigificant update and removed their CDMA registrations, and moved from 885 which was the single carrier for XT to 877mhz dual carrier I suspect.

Table updated and jumped from 3800 sites to 4848 sites... which sounds about right to me.




Check out my Mobile Cell Site Google Maps KML Files in my blog.
Now using Google Fusion Tables or Address Lookup or GPS using Smartphone
I update it on a monthly basis automatically from RSM.

670 posts

Ultimate Geek
+1 received by user: 11

Subscriber

  Reply # 720052 20-Nov-2012 13:01 Send private message

BarTender:
DjShadow: Thats a huge update, looks tons better!

Edit: seems to be a lot missing, esp Telecom. Also the other map I saw in a previous post showed a few 2degrees towers in coastal taranaki where this one doesn't... (unless 2degrees changed their mind?)


Ahh I see Telecom have done a sigificant update and removed their CDMA registrations, and moved from 885 which was the single carrier for XT to 877mhz dual carrier I suspect.

Table updated and jumped from 3800 sites to 4848 sites... which sounds about right to me.


Didn't you used to be able to click on the pins and see the frequency info etc for each site, or am I imagining this?

1774 posts

Uber Geek
+1 received by user: 97

Trusted

  Reply # 720065 20-Nov-2012 13:23 Send private message

BarTender:
DjShadow: Thats a huge update, looks tons better!

Edit: seems to be a lot missing, esp Telecom. Also the other map I saw in a previous post showed a few 2degrees towers in coastal taranaki where this one doesn't... (unless 2degrees changed their mind?)


Ahh I see Telecom have done a sigificant update and removed their CDMA registrations, and moved from 885 which was the single carrier for XT to 877mhz dual carrier I suspect.

Table updated and jumped from 3800 sites to 4848 sites... which sounds about right to me.


Have you got it set to pickup the 1800mhz sites 2degrees are rolling out also?

1327 posts

Uber Geek
+1 received by user: 6

Trusted

  Reply # 720080 20-Nov-2012 13:52 Send private message

allan: Didn't you used to be able to click on the pins and see the frequency info etc for each site, or am I imagining this?


Yeah.. that's in the Lookup. http://dl.dropbox.com/u/22487235/Address.html but I get your point I should update the joined single fusion page. http://dl.dropbox.com/u/22487235/fusion.html

DjShadow: Have you got it set to pickup the 1800mhz sites 2degrees are rolling out also?


Yes... I was already pulling that information out.  Feel free to have a look at the source data: https://www.google.com/fusiontables/DataSource?dsrcid=1355049 check out the twodeg1800hasval column.




Check out my Mobile Cell Site Google Maps KML Files in my blog.
Now using Google Fusion Tables or Address Lookup or GPS using Smartphone
I update it on a monthly basis automatically from RSM.

1 | 2 | 3 | 4 
View this topic in a long page with up to 500 replies per page Create new topic




Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Does acupuncture work?
Created by timmmay, last reply by geekiegeek on 30-Jul-2014 13:48 (27 replies)
Pages... 2


2 x PS4s to give away. Geekzone members only.
Created by BigPipeNZ, last reply by rphenix on 30-Jul-2014 23:18 (66 replies)
Pages... 3 4 5


Checking UHF aerial is working
Created by OnceBitten, last reply by B1GGLZ on 28-Jul-2014 21:49 (21 replies)
Pages... 2


VF, why you lie to me?
Created by kenkeniff, last reply by MadEngineer on 30-Jul-2014 22:05 (55 replies)
Pages... 2 3 4


Hierarchy of a mistake: Gerry Brownlee
Created by joker97, last reply by DonGould on 29-Jul-2014 21:57 (93 replies)
Pages... 5 6 7


2010 Honda Jazz, Suzuki Swift - which has higher maintenance cost?
Created by joker97, last reply by Jase2985 on 31-Jul-2014 07:13 (68 replies)
Pages... 3 4 5


"keyless" keys - questions
Created by joker97, last reply by MadEngineer on 30-Jul-2014 22:02 (35 replies)
Pages... 2 3


Dick Smith in Continual Sale Mode
Created by Dynamic, last reply by qyiet on 30-Jul-2014 16:50 (66 replies)
Pages... 3 4 5



Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.