OFFICIAL: Snaps VDSL2 Promo is up!

Forums › Snap › OFFICIAL: Snaps VDSL2 Promo is up!

1 | ... | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19

825 posts

Ultimate Geek

Trusted

Reply # 652133 6-Jul-2012 22:56
Yeah, 16, 0.0, well; 15, 0.0 (is 1ms difference in latency considered a change?) I'm still in my first 10 days post connection period tho...

Napster

202 posts

Master Geek

Reply # 652134 6-Jul-2012 23:01
Nah its only 1ms/8ms/16ms latency profiles. Not sure why it connects with a slightly different value. This is how the profiles are setup. 1ms/0INP 8ms/0INP 8ms/1INP 8ms/2INP 8ms/4INP 16ms/0INP 16ms/1INP 16ms/2INP 16ms/4INP

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652135 6-Jul-2012 23:04
Ok, so I've been on the same profile for nearly 5 days. Do the Chorus docs say anything about how often the profiles should change in the first 10 days?

Napster

202 posts

Master Geek

Reply # 652137 6-Jul-2012 23:08
Yea its every day for the first week. But to allow upto 10days. Sounds like DLM has settled you on that profile. DLM is still monitoring the line so don't worry. It should change soon, hopefully :)

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652138 6-Jul-2012 23:11
hmm, it hasn't changed since I re-did my cabling last, do you think I should do a manual resync or leave it?

Napster

202 posts

Master Geek

Reply # 652140 6-Jul-2012 23:16
Yea i would leave it. Manual resync will not trigger a profile change. DLM has a time window in which it will change the profile. 4:12am -6-12am DLM is not allowed to change the profile outside this set time.

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652141 6-Jul-2012 23:23
Hmm, ok, so since I was on 8, 0.0 but am now on 16, 0.0, after cabling changes dropped my atten. by 1db and my errors by ~1750 per minute, any ideas why would my profile not change down to at least 8, 0.0?

insane

1276 posts

Uber Geek

Trusted

Reply # 652146 6-Jul-2012 23:41
Napster: Yea i would leave it. Manual resync will not trigger a profile change. DLM has a time window in which it will change the profile. 4:12am -6-12am DLM is not allowed to change the profile outside this set time. Various profiles: 1ms/0INP 8ms/0INP 8ms/1INP 8ms/2INP 8ms/4INP 16ms/0INP 16ms/1INP 16ms/2INP 16ms/4INP This info should be in a 'sticky' thread

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652149 6-Jul-2012 23:46
insane: Napster: Yea i would leave it. Manual resync will not trigger a profile change. DLM has a time window in which it will change the profile. 4:12am -6-12am DLM is not allowed to change the profile outside this set time. Various profiles: 1ms/0INP 8ms/0INP 8ms/1INP 8ms/2INP 8ms/4INP 16ms/0INP 16ms/1INP 16ms/2INP 16ms/4INP This info should be in a 'sticky' thread I'm going to start a dedicated 'VDSL Performance Tuning' thread, probably tomorrow, to have one place to record all this type of info.

Napster

202 posts

Master Geek

Reply # 652154 7-Jul-2012 00:21
SamF: Hmm, ok, so since I was on 8, 0.0 but am now on 16, 0.0, after cabling changes dropped my atten. by 1db and my errors by ~1750 per minute, any ideas why would my profile not change down to at least 8, 0.0? It will in time :) Its a waiting game unfortunately lol

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652156 7-Jul-2012 00:22
Heh, yeah, seems to be!!

richms

8809 posts

Uber Geek

Trusted

Subscriber

Reply # 652158 7-Jul-2012 01:07
Just got into the offpeak $5 and not started doing anything yet. Nice improvemant over ADSL on the upload :) Richard rich.ms

McGee

200 posts

Master Geek

Reply # 652159 7-Jul-2012 01:15
richms: Just got into the offpeak $5 and not started doing anything yet. Nice improvemant over ADSL on the upload :) That's what mine was like before I disconnected all the other jackpoints.

SamF

825 posts

Ultimate Geek

Trusted

Reply # 652212 7-Jul-2012 11:24
Well... my Fritz re-synced last night: I'm down to 8ms latency, but sync is lower, errors are back up to their 2k/min rate and attenuation is back up to 10! Also INP is now at 2.0! So much for the cabling changes! :(

McGee

200 posts

Master Geek

Reply # 652216 7-Jul-2012 11:29
I've seen every single VDSL circuit that I've worked on throw up that many errors, It's not uncommon. I haven't found it to be service effecting as of yet.

1 | ... | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19