Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

View this topic in a long page with up to 500 replies per page Watch this topic Create new topic
1 | ... | 176 | 177 | 178 | 179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | 191 | 192 | 193 | 194 | 195 | 196 | ... | 231
^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 944753 3-Dec-2013 14:38 Send private message quote this post

mikenzb: So Got my DLM Reset this morning, Back to DLM 2 Yay, Now If I give this a month I should hopefully get back to DLM 1.

Lost my 0 line attenuation but I wouldn't call that the end of the world as again from my past experience it comes and goes.


attenuation would be like 0.5..

stevehodge:
mikenzb: So Got my DLM Reset this morning, Back to DLM 2 Yay, Now If I give this a month I should hopefully get back to DLM 1. 
 


I think a DLM reset puts it back in training mode so it should change in a few days.


this was the case for me. it depends though on what snap CSR you get.


some of them do a port reset, which forces DLM to reset, while others request chorus to do it.


for me, chorus did it, and i suspect it fully reset considering the huge speed drop out of nowhere.

Dairusire: Well, this is interesting.... You guys remember how I posted a while ago with that new Netcomm router... Seemed to have been having quite a few errors and that jazz, well good news I guess, had actually a resync about 2 days ago, have gone onto DLM1 and no have zilch errors (absolutely none for CRC (RS uncorrectable) 0.o) and still sync'ed up at nutty speeds :D


interesting move by DLM.. mysteries each day DLM hands out..


you do still have pretty high errored seconds. and a few SESs which is really not the best.

24 posts

Geek
+1 received by user: 1


  Reply # 945158 4-Dec-2013 10:06 Send private message quote this post

Hi all

Just got connected to Snap on Monday 25th Nov so am keen to squeeze out whatever is possible.
Have read through the entire thread (wow, there should be a badge for doing that)
House is cat5 wired, master filter installed (although not how I preferred) and am approx 550m to cabinet by road.
Originally using a Draytek 130 but now using Fritz for Snap Plus.
Wondering if someone could take a look and offer any advice for improvement.





Cheers guys.

24 posts

Geek
+1 received by user: 1


  Reply # 945161 4-Dec-2013 10:07 Send private message quote this post

On another note, funny what an Internet Connection will make you do, took me 7 years to register here, always enjoyed lurking in the shadows :p

^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 945170 4-Dec-2013 10:13 Send private message quote this post

error rates dont look bad, but your on a odd profile...

for your attenuation, i would expect atlest 30M atlest....


first order of business should probably be to downgrade that firmware.


your spectrum seems to taper really fast.. at your distance, it shouldnt go down that fast, could be quality of copper in your area though..

if the 8ms latency is fine for you, then theres certainly room to SNR tweak.

a badge! yes yes!



1216 posts

Uber Geek
+1 received by user: 116

Trusted

  Reply # 945175 4-Dec-2013 10:14 One person supports this post Send private message quote this post

@Lally: Mate, if there was a badge for that you'd certainly have earned it! Good work!

As for your line, your spectrum is looking pretty sick (in a bad way). Tomorrow (when your 10 day line evaluation period is up), I'd contact Snap and send them your stats. Something's not right there!

^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 945177 4-Dec-2013 10:16 Send private message quote this post

you said your lines not wired how you would like, do explain how..

24 posts

Geek
+1 received by user: 1


  Reply # 945180 4-Dec-2013 10:18 Send private message quote this post

Appreciate the quick replies guys, something else I noticed was the Carrier Record, on the first page of this thread its mentioned that typically everyone has A43, whats the difference between A and V?
Using the 7360 Hio, it's mentioned to use the .22 version which I can not find on the AVM ftp sites.

24 posts

Geek
+1 received by user: 1


  Reply # 945182 4-Dec-2013 10:20 Send private message quote this post

hio77: you said your lines not wired how you would like, do explain how..


I asked the Chorus tech to run cable to the jack point I installed in the room I wanted, he told me he couldn't do and to ask an electrician to do this for whatever reason.
So he ended up wiring the filter to the original jack point I was using.
The phone lines were star wired so not sure what he did to accomplish.



1216 posts

Uber Geek
+1 received by user: 116

Trusted

  Reply # 945185 4-Dec-2013 10:23 Send private message quote this post

Try this for the previous version of the 7360 firmware:

ftp://service.avm.de/Downgrade/FRITZ!Box_Fon_WLAN_7360/english/

There's also a '7360 SL' model, which is yours?

Also, WTH is a 7360!? :D

^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 945188 4-Dec-2013 10:24 Send private message quote this post

SamF: Try this for the previous version of the 7360 firmware:

ftp://service.avm.de/Downgrade/FRITZ!Box_Fon_WLAN_7360/english/

There's also a '7360 SL' model, which is yours?

Also, WTH is a 7360!? :D


replacement for the 7340



1216 posts

Uber Geek
+1 received by user: 116

Trusted

  Reply # 945189 4-Dec-2013 10:24 One person supports this post Send private message quote this post

Lally:
hio77: you said your lines not wired how you would like, do explain how..


I asked the Chorus tech to run cable to the jack point I installed in the room I wanted, he told me he couldn't do and to ask an electrician to do this for whatever reason.
So he ended up wiring the filter to the original jack point I was using.
The phone lines were star wired so not sure what he did to accomplish.


Hmm, sounds less than ideal to me!  Based on that it might actually pay to work out what's actually wired where and go from there.  Are you running a naked line?

^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 945192 4-Dec-2013 10:25 Send private message quote this post

Lally:
hio77: you said your lines not wired how you would like, do explain how..


I asked the Chorus tech to run cable to the jack point I installed in the room I wanted, he told me he couldn't do and to ask an electrician to do this for whatever reason.
So he ended up wiring the filter to the original jack point I was using.
The phone lines were star wired so not sure what he did to accomplish.


so he has installed the filter next to the jack? sounding like my ordeal all over again already...


the line between the original jack and your ETP, is that cat5? does the star now start AT the filter?


sounds almost like the filter is simply "inline" rather than splitting.

24 posts

Geek
+1 received by user: 1


  Reply # 945194 4-Dec-2013 10:25 Send private message quote this post

SamF: Try this for the previous version of the 7360 firmware:

ftp://service.avm.de/Downgrade/FRITZ!Box_Fon_WLAN_7360/english/

There's also a '7360 SL' model, which is yours?

Also, WTH is a 7360!? :D


Cheers Sam, will investigate for sure.

^__^
2467 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 945195 4-Dec-2013 10:26 Send private message quote this post

Lally: Appreciate the quick replies guys, something else I noticed was the Carrier Record, on the first page of this thread its mentioned that typically everyone has A43, whats the difference between A and V?
Using the 7360 Hio, it's mentioned to use the .22 version which I can not find on the AVM ftp sites.


cant say i have done much into the Carrier Record, thought it was pretty constant. what sort of DSLAM are you on? (it says on the overview tab)

24 posts

Geek
+1 received by user: 1


  Reply # 945198 4-Dec-2013 10:30 Send private message quote this post

hio77:
Lally:
hio77: you said your lines not wired how you would like, do explain how..


I asked the Chorus tech to run cable to the jack point I installed in the room I wanted, he told me he couldn't do and to ask an electrician to do this for whatever reason.
So he ended up wiring the filter to the original jack point I was using.
The phone lines were star wired so not sure what he did to accomplish.


so he has installed the filter next to the jack? sounding like my ordeal all over again already...


the line between the original jack and your ETP, is that cat5? does the star now start AT the filter?


sounds almost like the filter is simply "inline" rather than splitting.



Sam, had a pots line still up until yesterday.

As far as I am aware, filter installed at ETP, I do remember him doing something at one other jackpoint in the kitchen and then having to go up and do something where all the lines met in the ceiling space. Im worried now it was a cowboy job to get it done quickly and then move on. I had asked Snap for clarification on what he was suppose to do and what they were billed for but am yet to hear something back.

*edited for bad grammar

1 | ... | 176 | 177 | 178 | 179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | 191 | 192 | 193 | 194 | 195 | 196 | ... | 231
View this topic in a long page with up to 500 replies per page Watch this topic Create new topic

Twitter »
Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:




News »

Trending now »
Hot discussions in our forums right now:

Hierarchy of a mistake: Gerry Brownlee
Created by joker97, last reply by sdav on 25-Jul-2014 13:16 (47 replies)
Pages... 2 3 4


Geekzone giveaway: Thecus N2310 NAS
Created by freitasm, last reply by Dunnersfella on 24-Jul-2014 23:17 (81 replies)
Pages... 4 5 6


MH 17 "shot down" all dead
Created by joker97, last reply by ScuL on 24-Jul-2014 21:40 (203 replies)
Pages... 12 13 14


Is chorus going to deliberately slow adsl internet down
Created by rugrat, last reply by NonprayingMantis on 25-Jul-2014 13:00 (43 replies)
Pages... 2 3


Huge Fuss, didn't even make it a year.
Created by networkn, last reply by Glassboy on 22-Jul-2014 19:50 (121 replies)
Pages... 7 8 9


Sickening floral smell in car, What next?
Created by TimA, last reply by TimA on 25-Jul-2014 12:51 (38 replies)
Pages... 2 3


Skinny's new aggressive ad campaign
Created by Yabanize, last reply by Yabanize on 22-Jul-2014 23:35 (52 replies)
Pages... 2 3 4


Giving notice
Created by IlDuce, last reply by kharris on 24-Jul-2014 17:36 (15 replies)


Geekzone Live »
Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.