With the Wi-Fi you're able to turn the lights on/off, adjust the brightness and change the colour. Also if you buy the Wi-Fi bridge you can connect them to your home network and control the lights using an Android or iPhone app (or programmatically via basic UDP commands).
Pretty cool aye?
So I just got my bulbs and here's my initial impressions.
Sadly the starter kit I recieved had the wrong bulbs in the box, bayonet instead of screw in, box was right on outside just a packaging error. These things happen, not a biggie, assuming I get free replacements.
The bulbs are very bright in my opinion, I was concerned they would be too dark. They are even brighter than the bulbs I was using, so I'm very happy with that. When I first plugged them in, two were yellow and one was white. At first I wasn't sure why they were different colours, then I remembered you could change colours and I just had to change them all to white and I was away laughing. With the white bulbs they can be either yellow or white (or somewhere in between) the colour bulbs can be any colour you want.
Wi-Fi was easy to setup, but I have a few issues with it:
- When connecting the Wi-Fi bridge to your home Wi-Fi network, your Wi-Fi network password can NOT contain any special characters or spaces. So I had to change my home network and every device on my network to use a basic password to get this to work. Really not impressed with that. The developers should have tested this, who doesn't have spaces or special characters in their Wi-Fi password?
- The password for the admin user when logging into the bridge is limited to 6 characters. Security doesn't seem high on their priority list...
Hopefully this can be updated with a firmware update rather quickly.
If the security issues and the zone limit could be fixed they would be perfect. But as they stand today, I'll give them 7 out of 10.
Please please LimitlessLED fix these issues quickly!
UPDATE: You can use multiple bridges to control more zones, so for 12 zones I would need 3 bridges. Great they work on same network, but would be better if only one bridge was required.
Comment by sonyxperiageek, on 20-May-2013 21:09
Please please please change "Should of" (sic) to "Should HAVE"..
Comment by LimitlessLED, on 11-Jul-2015 10:50
UPDATE: security issue is fixed, we removed the web admin page. now you don't need to set a less than 6 character password. you do all the configuration through the windows or iphone or android app.
UPDATE: the wifi module now uses the latest WPA2/PSK for security and can handle any number of characters and symbols for your wifi router wireless password.
UPDATE: you can use 100 bridges, to give you control of 400 individually grouped bulbs, or 1 bulb in each group.
UPDATE: you can use a PL1176 2.4Ghz transceiver and control individual bulbs directly after you have synced them to the remoteID.
see www.limitlessled.com/dev for latest updates. as the technology evolves...
Add a comment
Please note: comments that are inappropriate or promotional in nature will be deleted.
E-mail addresses are not displayed, but you must enter a valid e-mail address to confirm your comments.
Are you a registered Geekzone user? Login to have the fields below automatically filled in for you and to enable links in comments. If you have (or qualify to have) a Geekzone Blog then your comment will be automatically confirmed and shown in this blog post.