Useful SNMP OIDs for Home Automation

, posted: 14-Jan-2019 17:37

I've been playing with Home Assistant and using a few devices around my home network so thought it would be useful to document some of the useful SNMP OIDs I have found:

Switches:

Device SNMP OID On Value Off Value Notes
APC 7920 PDU .1.3.6.1.4.1.318.1.1.12.3.3.1.1.4.1 1 2 Increment the last value of the OID for the port number.
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.4.1.2.1.2.1.1 1 0 Increment the last value of the OID for the port number.
Cisco 3750 PoE Switch inline power .1.3.6.1.4.1.9.9.402.1.2.1.1.1.1 1 4 Increment the last value of the OID for the port number. Integer 4 is "disabled" and 1 is Auto

 

 

Sensors:

Device SNMP OID Notes
Raritan DPX-T2H2 sensor for PX2-2190R Temp .1.3.6.1.4.1.13742.6.5.5.3.1.4.1.1 Need to divide number by 10 to get decimal place as it is an integer. The DPX-T2H2 has two sensors and the second sensor has the OID value of .3
Raritan DPX-T2H2 sensor for PX2-2190R Humidity .1.3.6.1.4.1.13742.6.5.5.3.1.4.1.2 Humidity and the second sensor is .4
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.1 Rms Current
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.4 Rms Voltage
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.5 Active Power
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.6 Apparent Power
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.7 Power Factor
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.8 Active Energy
Raritan PX2-2190R .1.3.6.1.4.1.13742.6.5.2.3.1.4.1.1.23 Active Energy
APC NMC AP9335T .1.3.6.1.4.1.318.1.1.25.1.2.1.6.1.1 Need to divide number by 10 to get decimal place as it is an integer

 





BarTender's profile

Bar Tender
Wellington
New Zealand