Hope someone can point me in the right direction.

Having problems connecting the 2210 to small home network.

I have adsl router that the wired pc's are connected to. Have a Belkin Access point (for the 2210) that is connected to the router. The 2210 has a Belkin CF Wifi card.

I need to know the settings that the Accesspoint should be set to. It came with a default of 192.160.0.254 and DCHP enabled. I have changed this to 192.168.1.254 and disabled DCHP. If I enter static IP address in the 2210 - say 192.168.1.55 then I can browse files on the two wired PC's (from the 2210) but cannot get on the internet with it.

Running IPconfig on one of the wired PC's I get:
IP address: 192.168.1.14
Subnet: 255.255.255.0
Default gateway: 192.168.1.254

Any ideas?