Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




133 posts

Master Geek


Topic # 184094 10-Nov-2015 10:24
Send private message

Project I am trying to get off the ground. Look forward to your feedback.

https://www.pledgeme.co.nz/projects/3968-reality-6d-mvp

Jason

Create new topic
221 posts

Master Geek
+1 received by user: 50


  Reply # 1426144 11-Nov-2015 12:11
One person supports this post
Send private message

There's a few spelling and grammar errors in the pitch.

You say the goggles will have stereoscopic vision, so that means that you are going to have 2 cameras in the car? If so, how will you deal with parallax issues and users differing IPD?

It's well known in the VR industry that latency is a big reason for motion sickness - how do you intend to overcome latency between the car accelerometers and the seat, the cameras and the goggles, the head trackers and the camera gimble?

How do you intend to calibrate the movement of the seat rig against the movement of the head tracker?

The physics of an RC car are so completely different to a full size car - for a start the motion of travel is very small (Suspension travel on an RC road car is what...10mm? Vs probably 200-300mm on a full size car) - how do you intend to translate those movements so that the rig doesn't just shake the driver to pieces?

Sorry to be harsh - It's a cool concept - I've often thought about putting a FPV rig in an RC car - I just think the addition of 6DOF feedback to the driver might be a bit much for most and there are some huge complexities to overcome. All the best.







133 posts

Master Geek


  Reply # 1426186 11-Nov-2015 12:52
Send private message

There's a few spelling and grammar errors in the pitch.
Thx

You say the goggles will have stereoscopic vision, so that means that you are going to have 2 cameras in the car? If so, how will you deal with parallax issues and users differing IPD?
The MVP will not be 3D I need to note that in the pitch. Should the problems in the following question you asked be overcome we will have up to 66mm adjustment in the rift. 

It's well known in the VR industry that latency is a big reason for motion sickness - how do you intend to overcome latency between the car accelerometers and the seat, the cameras and the goggles, the head trackers and the camera gimble?
Kiwi Ingenuity? I agree this will be a major factor in the project and using different methods of communication and hardware we hope to keep the latency as marginal as possible. Speeds are getting better all the time and products like http://www.zeiss.com/cinemizer-oled/en_de/home.html show little to no lag. There will be a lot of mix and matching but that is why the electronic dev cost is so high (39999)

How do you intend to calibrate the movement of the seat rig against the movement of the head tracker?
When a driver starts they will be asked to look straight with the car in a neutral position and push a calibration button. Motion table and the head tracking will managed independently to avoid hunting situations. 

The physics of an RC car are so completely different to a full size car - for a start the motion of travel is very small (Suspension travel on an RC road car is what...10mm? Vs probably 200-300mm on a full size car) - how do you intend to translate those movements so that the rig doesn't just shake the driver to pieces?
LOL Absolutely! This will be managed by the "personality" board. Like motion rides the motion itself is exaggerated to give the sense of kinematic movement. If we were to just directly translate the movement of the car to the seat it would be a pretty bland experience.  By far I think this will be the most complicated part of the project. 

Sorry to be harsh - It's a cool concept - I've often thought about putting a FPV rig in an RC car - I just think the addition of 6DOF feedback to the driver might be a bit much for most and there are some huge complexities to overcome. All the best.
Thx

 
 
 
 


1975 posts

Uber Geek
+1 received by user: 937


  Reply # 1426248 11-Nov-2015 14:13
Send private message

Cool concept. But I disagree with the RC car part of it.

I guess you're looking at some kind of fairground ride scenario, where people pay a few bucks to drive the sim. But I foresee all kinds of issues when the RC car does actually crash... everything stops while the operator goes out and puts it back on its wheels again.

A 6-DOF seat hooked up to an existing driving (or flying, or rollercoaster, or whatever) simulator would be a much larger market. And I think significantly easier to achieve. 


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Chow brothers plan to invest NZ$100 million in technology
Posted 24-Sep-2017 16:24


Symantec protects data everywhere with Information Centric Security
Posted 21-Sep-2017 15:33


FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16


Windows 10 Fall Creators Update coming Oct. 17
Posted 4-Sep-2017 14:10



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.