Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | ... | 24
265 posts

Ultimate Geek
+1 received by user: 150

Trusted

  Reply # 1452402 17-Dec-2015 17:17
Send private message

SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


If this is the case, then Houston we have a problem, HSDPA and UMTS are NOT 4G, It would be a pretty poor show if the service is advertised as "Superfast 4G" but to have it only delivered on previous generation technologies. I think someone from Skinny had better clarify things definitively at this point.

https://en.wikipedia.org/wiki/List_of_mobile_phone_standards

503 posts

Ultimate Geek
+1 received by user: 126

Trusted
Skinny

  Reply # 1452405 17-Dec-2015 17:29
Send private message

SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.

 
 
 
 


66 posts

Master Geek
+1 received by user: 6


  Reply # 1452462 17-Dec-2015 18:35
Send private message

LivingSkinny:
SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.


Now I don't know who to believe.  700 MHz 4G is already available in my area.  Saying that you're waiting on Spark to expand the network doesn't make sense.

I share an Office with the Northland Spark team who tell me 4G 700 MHz is already available to me.  The Spark 4G-700 MHz map shows it's available to me, yet you're saying you are waiting on Spark to expand into my area?  Hmm...

I was ready to accept that you don't use the 700 MHz band, and that would have explained everything.  Now I am just more confused/bemused.  Currently, what I have in writing in an official Skinny response is that you do not have a product offering on 700 MHz, and I'm inclined to believe that based on all the information I have collected to date.

1318 posts

Uber Geek
+1 received by user: 464


  Reply # 1452463 17-Dec-2015 18:40
Send private message

Just because you can get Spark 4G, doesn't mean you can get Skinny Broadband. You need to be in the specified cell sites in order to get it.

503 posts

Ultimate Geek
+1 received by user: 126

Trusted
Skinny

  Reply # 1452470 17-Dec-2015 18:46
Send private message

SiliconAudio:
LivingSkinny:
SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.


Now I don't know who to believe.  700 MHz 4G is already available in my area.  Saying that you're waiting on Spark to expand the network doesn't make sense.

I share an Office with the Northland Spark team who tell me 4G 700 MHz is already available to me.  The Spark 4G-700 MHz map shows it's available to me, yet you're saying you are waiting on Spark to expand into my area?  Hmm...

I was ready to accept that you don't use the 700 MHz band, and that would have explained everything.  Now I am just more confused/bemused.  Currently, what I have in writing in an official Skinny response is that you do not have a product offering on 700 MHz, and I'm inclined to believe that based on all the information I have collected to date.


Skinny broadband is a 4G only product which runs on the 700Mhz, 1800mhz and 2600Mhz frequencies.

However, due to network capacity planning reasons it is not available everywhere that 4G is present.

It may be that additional capacity has to be added to an existing 4G capable area before it is eligible for Skinny Broadband.

I'm sorry that you were misinformed and I have taken steps to ensure our team receive additional training.

66 posts

Master Geek
+1 received by user: 6


  Reply # 1452484 17-Dec-2015 19:13
Send private message

LivingSkinny:
SiliconAudio:
LivingSkinny:
SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.


Now I don't know who to believe.  700 MHz 4G is already available in my area.  Saying that you're waiting on Spark to expand the network doesn't make sense.

I share an Office with the Northland Spark team who tell me 4G 700 MHz is already available to me.  The Spark 4G-700 MHz map shows it's available to me, yet you're saying you are waiting on Spark to expand into my area?  Hmm...

I was ready to accept that you don't use the 700 MHz band, and that would have explained everything.  Now I am just more confused/bemused.  Currently, what I have in writing in an official Skinny response is that you do not have a product offering on 700 MHz, and I'm inclined to believe that based on all the information I have collected to date.


Skinny broadband is a 4G only product which runs on the 700Mhz, 1800mhz and 2600Mhz frequencies.

However, due to network capacity planning reasons it is not available everywhere that 4G is present.

It may be that additional capacity has to be added to an existing 4G capable area before it is eligible for Skinny Broadband.

I'm sorry that you were misinformed and I have taken steps to ensure our team receive additional training.


OK, thanks for clearing that up.  I look forward to it being available in my area, as it seems like the best product for me.  I like that I can just buy another 60 GB when I need/want to with your product versus the way the competing 4G products work.  Looking forward to getting anything better than the 5 Mbps I am stuck with now :)

503 posts

Ultimate Geek
+1 received by user: 126

Trusted
Skinny

  Reply # 1452486 17-Dec-2015 19:18
Send private message

SiliconAudio:
LivingSkinny:
SiliconAudio:
LivingSkinny:
SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.


Now I don't know who to believe.  700 MHz 4G is already available in my area.  Saying that you're waiting on Spark to expand the network doesn't make sense.

I share an Office with the Northland Spark team who tell me 4G 700 MHz is already available to me.  The Spark 4G-700 MHz map shows it's available to me, yet you're saying you are waiting on Spark to expand into my area?  Hmm...

I was ready to accept that you don't use the 700 MHz band, and that would have explained everything.  Now I am just more confused/bemused.  Currently, what I have in writing in an official Skinny response is that you do not have a product offering on 700 MHz, and I'm inclined to believe that based on all the information I have collected to date.


Skinny broadband is a 4G only product which runs on the 700Mhz, 1800mhz and 2600Mhz frequencies.

However, due to network capacity planning reasons it is not available everywhere that 4G is present.

It may be that additional capacity has to be added to an existing 4G capable area before it is eligible for Skinny Broadband.

I'm sorry that you were misinformed and I have taken steps to ensure our team receive additional training.


OK, thanks for clearing that up.  I look forward to it being available in my area, as it seems like the best product for me.  I like that I can just buy another 60 GB when I need/want to with your product versus the way the competing 4G products work.  Looking forward to getting anything better than the 5 Mbps I am stuck with now :)


The next address update will be loaded mid Jan and then monthly so I suggest checking on the 15th

503 posts

Ultimate Geek
+1 received by user: 126

Trusted
Skinny

  Reply # 1452487 17-Dec-2015 19:18
Send private message

SiliconAudio:
LivingSkinny:
SiliconAudio:
LivingSkinny:
SiliconAudio: So, I got a reply back from Skinny.  They aren't using the 700 MHz spectrum at all:

Unfortunately our Skinny Broadband doesnt use 700MHZ 4G network ( Rural) we use Sparks 4G network HSDPA 850MHZ and UMTS 2100MHZ


I just need to correct this and apologise if you were given incorrect or misleading information.  

We use Spark's 4G network on 700Mhz, 1800Mhz and 2600Mhz for Skinny Broadband.  Whilst not all addresses that receive 4G coverage are eligible, as Spark expands their network we'll update our eligibility criteria.  In fact more addresses were just added this week and more will be added mid January.


Now I don't know who to believe.  700 MHz 4G is already available in my area.  Saying that you're waiting on Spark to expand the network doesn't make sense.

I share an Office with the Northland Spark team who tell me 4G 700 MHz is already available to me.  The Spark 4G-700 MHz map shows it's available to me, yet you're saying you are waiting on Spark to expand into my area?  Hmm...

I was ready to accept that you don't use the 700 MHz band, and that would have explained everything.  Now I am just more confused/bemused.  Currently, what I have in writing in an official Skinny response is that you do not have a product offering on 700 MHz, and I'm inclined to believe that based on all the information I have collected to date.


Skinny broadband is a 4G only product which runs on the 700Mhz, 1800mhz and 2600Mhz frequencies.

However, due to network capacity planning reasons it is not available everywhere that 4G is present.

It may be that additional capacity has to be added to an existing 4G capable area before it is eligible for Skinny Broadband.

I'm sorry that you were misinformed and I have taken steps to ensure our team receive additional training.


OK, thanks for clearing that up.  I look forward to it being available in my area, as it seems like the best product for me.  I like that I can just buy another 60 GB when I need/want to with your product versus the way the competing 4G products work.  Looking forward to getting anything better than the 5 Mbps I am stuck with now :)


The next address update will be loaded mid Jan and then monthly so I suggest checking on the 15th

163 posts

Master Geek
+1 received by user: 10


  Reply # 1452649 17-Dec-2015 21:14
Send private message

what i am wondering is how skinny is able to offer such cheap data.
if it is govt subsidised RBI data i thought it would only be available to rural users or people with no ADSL
so far the only adresses coming up that are available are in the city.
 if congestion is the issue thinly populated rural areas would not have that problem

7 posts

Wannabe Geek


  Reply # 1454737 21-Dec-2015 19:20
Send private message

will thye being offering unlimited as well? 

39 posts

Geek
+1 received by user: 5


  Reply # 1455697 22-Dec-2015 22:28
Send private message

kaihoka: what i am wondering is how skinny is able to offer such cheap data.
if it is govt subsidised RBI data i thought it would only be available to rural users or people with no ADSL
so far the only adresses coming up that are available are in the city.
 if congestion is the issue thinly populated rural areas would not have that problem


The service is cheap because the 4G band is very cost effective and has a very large capacity. The units are also geographically locked to a specific tower.

50 posts

Geek
+1 received by user: 3


  Reply # 1455743 23-Dec-2015 02:07
Send private message

So will 2talk not work over this connection ???

9 posts

Wannabe Geek


  Reply # 1455836 23-Dec-2015 09:57
Send private message

Well as a user of the service for the past week and a half I am a very happy.

I am in Auckland and my particular area is still limited to ADSL services only (usually about 10Mbps Down 700Kbps Up) with VDSL not doable and Fibre sometime away thought I would give this service a try in my desire for more speed.

With the Skinny 4G Broadband speeds have consistently far better 30+Mbps Down 20+Mbps Up so far once I found the best spot for the device in the house, that being said I polished off the first 60GB in a week so this new found speed may prove to be more expensive but I can live with that until fibre comes along.

Can't comment on VOIP services as I don't use any mobiles cater to all voice requirements in our household, but Skype and similar services work flawlessly.

265 posts

Ultimate Geek
+1 received by user: 150

Trusted

  Reply # 1455851 23-Dec-2015 10:16
Send private message

haysking: So will 2talk not work over this connection ???


As long as you are using their sip proxy in your configuration its very likely 2talk will work.

5016 posts

Uber Geek
+1 received by user: 2049

Trusted
Subscriber

  Reply # 1455861 23-Dec-2015 10:41
Send private message

noroad:
haysking: So will 2talk not work over this connection ???


As long as you are using their sip proxy in your configuration its very likely 2talk will work.

I'm planning to get a connection soon to play with, so will post back (probably in new year) my results.





Chorus has spent $1.4 billion on making their xDSL broadband network faster. If your still stuck on ADSL or VDSL, why not spend from $150 on a master filter install to make sure you are getting the most out of your connection?
I install - Naked DSL, DSL Master Splitters, VoIP, data cabling and general computer support for home and small business.
Rural Broadband RBI installer for Ultimate Broadband and Full Flavour

 

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | ... | 24
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.