Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




406 posts

Ultimate Geek
+1 received by user: 9

Subscriber

Topic # 114556 23-Feb-2013 11:31 Send private message

Hi guys. Is it possible to have a socket in my kitchen re-wired to 110 volt to use US appliances with it ?

My thought would be there would need to be a step down transformer wired into the line somewhere (?)

Does anybody know if this is possible and would it be expensive ?

Thanks.

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
1574 posts

Uber Geek
+1 received by user: 11


  Reply # 768106 23-Feb-2013 11:35 Send private message

I'm pretty sure having a hard-wired in step-down transformer in the wall would be highly illegal in NZ.

Something like this
http://www.jaycar.co.nz/productView.asp?ID=MF1091&keywords=step+down&form=KEYWORD

would be your best bet.

1383 posts

Uber Geek
+1 received by user: 108

Subscriber

  Reply # 768107 23-Feb-2013 11:36 Send private message

I would say its possible but the cost might outweigh any advantages.   The workshop I worked in for last 33 years had 32volt wired around for safety and we had 32 volt electric drills and grinders.  This before days of cordless battery drills etc.   Used 32 volt stepdown transformers at the main switchboard.  So a house would be possible but at what cost. May not be cost effective and of course would need to check whether it is legal these days or not as well




HTPC Intel Pentium G3258 cpu, Gigabyte H97n-wifi motherboard, , 8GB DDR3 ram, onboard  graphics. Hauppuage HVR 5500 tuner,  Silverstone LC16M case, Windows 10 pro 64 bit using Nextpvr and Kodi


 

 





406 posts

Ultimate Geek
+1 received by user: 9

Subscriber

  Reply # 768130 23-Feb-2013 12:04 Send private message

dontpanic42: I'm pretty sure having a hard-wired in step-down transformer in the wall would be highly illegal in NZ.

Something like this
http://www.jaycar.co.nz/productView.asp?ID=MF1091&keywords=step+down&form=KEYWORD

would be your best bet.


Awesome, thanks dontpanic42. That will do the trick.

1241 posts

Uber Geek
+1 received by user: 134


  Reply # 768155 23-Feb-2013 13:07 Send private message

stop down transformers are highly inefficient to run appliances off

19476 posts

Uber Geek
+1 received by user: 3406

Trusted
Subscriber

  Reply # 768160 23-Feb-2013 13:36 Send private message

quality transformers are pretty efficiant.

But no way will you be able to put a US outlet on your fixed wiring - not approved and a really shoody outlet. Yellow ceeform ones might me doable. big and ugly tho. One of my stepdowns has that as the outlet since its real common in the uk for worksites.




Richard rich.ms

3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 768188 23-Feb-2013 15:12 Send private message

There are a few issues with a stepdown transformer. One of them is it will not convert the frequency from 50Hz to 60Hz, so your 110V products will have a different impedance (which is dependant on frequency) and will get stressed when run at 50Hz.

Another issue is that a stepdown transformer does not provide dialectric isolation from 240V, and there are risks if a 110V appliance like say an amplifier is connected via an audio cable to a 240V TV set.

110V stepdown transformers should be limited to lab use, it is not really a consumer item.




You can never have enough Volvos!


3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 768189 23-Feb-2013 15:15 Send private message

richms: quality transformers are pretty efficiant.

But no way will you be able to put a US outlet on your fixed wiring - not approved and a really shoody outlet. Yellow ceeform ones might me doable. big and ugly tho. One of my stepdowns has that as the outlet since its real common in the uk for worksites.


Agree, an "auto" transformer is much more efficient than a normal transformer at the expense of no galvanic isolation.

Just wondering if a 110V shaver socket for hotels can be used for residential?




You can never have enough Volvos!




406 posts

Ultimate Geek
+1 received by user: 9

Subscriber

  Reply # 768191 23-Feb-2013 15:32 Send private message

Niel:
richms: quality transformers are pretty efficiant.

But no way will you be able to put a US outlet on your fixed wiring - not approved and a really shoody outlet. Yellow ceeform ones might me doable. big and ugly tho. One of my stepdowns has that as the outlet since its real common in the uk for worksites.


Agree, an "auto" transformer is much more efficient than a normal transformer at the expense of no galvanic isolation.

Just wondering if a 110V shaver socket for hotels can be used for residential?


I never thought of the Shaver Socket.

It would be installed and used in my kitchen for bench top appliances if we went ahead.

1722 posts

Uber Geek
+1 received by user: 180

Trusted

  Reply # 768194 23-Feb-2013 15:35 Send private message

slliwgd:
Niel:
richms: quality transformers are pretty efficiant.

But no way will you be able to put a US outlet on your fixed wiring - not approved and a really shoody outlet. Yellow ceeform ones might me doable. big and ugly tho. One of my stepdowns has that as the outlet since its real common in the uk for worksites.


Agree, an "auto" transformer is much more efficient than a normal transformer at the expense of no galvanic isolation.

Just wondering if a 110V shaver socket for hotels can be used for residential?


I never thought of the Shaver Socket.

It would be installed and used in my kitchen for bench top appliances if we went ahead.


Most kitchen appliances would exceed the current rating of a shaver socket - dont try this without comparing the specs of the outlet to the specs of your appliance. My guess is that perhaps a stick blender would work but nothing else

4161 posts

Uber Geek
+1 received by user: 1091


  Reply # 768195 23-Feb-2013 15:38 Send private message

Buy some new appliances locally.

Surely the total cost of ownership taking in to account importing, voltage conversion, warranty and safety has got to be higher using US appliances.

1574 posts

Uber Geek
+1 received by user: 11


  Reply # 768198 23-Feb-2013 15:47 Send private message

RunningMan: Buy some new appliances locally.

Surely the total cost of ownership taking in to account importing, voltage conversion, warranty and safety has got to be higher using US appliances.


+1. What kind of appliances are you trying to run at 110V?
Surely you could buy the same locally at lower cost and hassle than trying to get 110V working.

3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 768199 23-Feb-2013 15:48 Send private message

Agree with RunningMan. One of the main issues would be insurance claims which is getting much tighter. You are not really covered if you are using appliances that do not comply with NZ standards (or were not tested).




You can never have enough Volvos!


24877 posts

Uber Geek
+1 received by user: 4778

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 768205 23-Feb-2013 16:11 Send private message

slliwgd:
Niel:
richms: quality transformers are pretty efficiant.

But no way will you be able to put a US outlet on your fixed wiring - not approved and a really shoody outlet. Yellow ceeform ones might me doable. big and ugly tho. One of my stepdowns has that as the outlet since its real common in the uk for worksites.


Agree, an "auto" transformer is much more efficient than a normal transformer at the expense of no galvanic isolation.

Just wondering if a 110V shaver socket for hotels can be used for residential?


I never thought of the Shaver Socket.

It would be installed and used in my kitchen for bench top appliances if we went ahead.


I can't find the specs for the PDL unit online but from memory these supply about 20W and are designed only for a shaver or other extremely low wattage devices. This is going to exclude pretty much every kitchen appliance.

The best solution is to buy new appliances.


3491 posts

Uber Geek
+1 received by user: 1646

Trusted
Subscriber

  Reply # 768234 23-Feb-2013 18:00 Send private message

sbiddle: I can't find the specs for the PDL unit online but from memory these supply about 20W and are designed only for a shaver or other extremely low wattage devices. This is going to exclude pretty much every kitchen appliance.

The best solution is to buy new appliances.



Here it is:
http://www.pdlglobal.com/data/product_documents/675%20Declaration%20of%20Conformity.pdf




Whatifthespacekeyhadneverbeeninvented?


3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 768328 23-Feb-2013 22:09 Send private message

sbiddle: I can't find the specs for the PDL unit online but from memory these supply about 20W and are designed only for a shaver or other extremely low wattage devices. This is going to exclude pretty much every kitchen appliance.

The best solution is to buy new appliances.



Thanks, was just wondering if it can be used in a home, not that it would be rated for appliances.




You can never have enough Volvos!


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

NetValue partners with CRM Provider SugarCRM
Posted 23-May-2017 20:04


Terabyte looms as Vocus users download 430GB a month
Posted 19-May-2017 14:51


2degrees tips into profit after seven lean years
Posted 19-May-2017 09:47


2degrees growth story continues
Posted 17-May-2017 15:25


Symantec Blocks 22 Million Attempted WannaCry Ransomware Attacks Globally
Posted 17-May-2017 12:41


HPE Unveils Computer Built for the Era of Big Data
Posted 17-May-2017 12:39


Samsung Galaxy S8 Plus review: Beautiful, feature-packed
Posted 16-May-2017 20:14


After ten years of mail pain Spark is done with Yahoo
Posted 15-May-2017 13:12


Warnings from security firms: do not click that link or risk your computer being infected
Posted 15-May-2017 10:11


Pushpay named NZ Hi-Tech Company of the Year 2017
Posted 15-May-2017 09:59


Passive Optical Lan means fibre to the desktop
Posted 12-May-2017 17:09


Finalists Named for 2017 CIO Awards
Posted 11-May-2017 20:00


Exhibition to showcase digital artwork from across the globe
Posted 10-May-2017 18:54


Accelerate 2017 to focus on navigating disruption with a design thinking mindset
Posted 10-May-2017 18:49


James Pascoe Group switches to Rimini Street for support of SAP aplications
Posted 10-May-2017 18:40



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.