Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


st2



7 posts

Wannabe Geek


# 136223 19-Nov-2013 16:07
Send private message

I have a small decking and fence project coming up and am finally tempted to buy myself a mitre/drop saw.
I already have a good quality bench saw for panel and joinery type work but feel the need to add to the tool collection...

It would only get occasional use and I was looking at a budget of $500 max.

Anybody have any suggestions ?

Thanks

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
1535 posts

Uber Geek
+1 received by user: 116


841 posts

Ultimate Geek
+1 received by user: 200


  # 937516 19-Nov-2013 20:26
Send private message

I have the ryobi mitre saw.

It only gets light, occasional use but it works just fine.

Cost is a lot below your budget.

 
 
 
 


1665 posts

Uber Geek
+1 received by user: 283

Subscriber

  # 937539 19-Nov-2013 20:36
One person supports this post
Send private message

+1 on the slider style. It means you can cut mitres on almost any width (within reason).

3169 posts

Uber Geek
+1 received by user: 1624


  # 937560 19-Nov-2013 21:13
Send private message

Absolutely go with a slider. Especially for fencing. I have a Ryobi which has given me years of loyal service. Should find one well within your budget.




Always be yourself, unless you can be Batman, then always be the Batman



22054 posts

Uber Geek
+1 received by user: 4680

Trusted
Subscriber

  # 937600 19-Nov-2013 22:23
Send private message

Put a good blade on whatever you get. The cheap ryobi I got was rubbish till I put a proper blade on it.




Richard rich.ms

Mad Scientist
20126 posts

Uber Geek
+1 received by user: 2734

Trusted
Lifetime subscriber

  # 937611 19-Nov-2013 22:52
Send private message

Hi sorry I'm dumb but what is a slider? Should I buy one and use it on a bench or buy one that comes with legs?

Thanks




Swype on iOS is detrimental to accurate typing. Apologies in advance.


4123 posts

Uber Geek
+1 received by user: 842
Inactive user


  # 937646 20-Nov-2013 05:10
Send private message

Slider means the saw slides on a couple of arms so you can pull it towards yourself and cut longer pieces of timber, rather than a simple drop saw. Example here

6434 posts

Uber Geek
+1 received by user: 1571


  # 937661 20-Nov-2013 07:14
Send private message

richms: Put a good blade on whatever you get. The cheap ryobi I got was rubbish till I put a proper blade on it.


This.

In my experience the cheaper tools aren't really any worse than the expensive ones for home projects. But they always come with crummy blades, bits, attachments, so invest more in getting good quality extras.

BTR

1509 posts

Uber Geek
+1 received by user: 459


  # 937677 20-Nov-2013 07:57
Send private message

+1 on a sliding drop saw. The one U purchased wasn't and regret not getting a sliding one now, even cutting a standard fence paling on a non slider drop saw means flipping the paling over to get right through it. Also go with a quality brand rather than a "cheap" one as the build quality is better and you want your cuts to be accurate.

Mad Scientist
20126 posts

Uber Geek
+1 received by user: 2734

Trusted
Lifetime subscriber

  # 937682 20-Nov-2013 08:04
Send private message

I presume it's best to be used on a solid bench? Sorry noob diyer looking at saws since 2011




Swype on iOS is detrimental to accurate typing. Apologies in advance.


5421 posts

Uber Geek
+1 received by user: 1876


  # 937683 20-Nov-2013 08:04
Send private message

Make sure whatever saw you get is capable of cutting the biggest timber you need. Eg. a 10" blade (without slide) will normally get through 150x50 for your joists, but that is about the limit. Clearance around the motor housing usually determines the maximum cut depth you will get.

5421 posts

Uber Geek
+1 received by user: 1876


  # 937684 20-Nov-2013 08:06
Send private message

joker97: I presume it's best to be used on a solid bench? Sorry noob diyer looking at saws since 2011


the ideal is a solid bench or platform that is wide (long) enough to support the lengths of timber being cut. This could be a small bench or table then add temporary extensions or supports for longer timber.

3344 posts

Uber Geek
+1 received by user: 1089

Trusted
Vocus

  # 937711 20-Nov-2013 09:31
Send private message

Many times I have seen builders just use the drop saw on the ground.  Then you have no worries with how long the bench is etc.  It's just a bit more awkward (but you're not there for long generally)

75 posts

Master Geek
+1 received by user: 12

Trusted

  # 937813 20-Nov-2013 11:53
Send private message

DeWalt make an awesome mitre saw stand which packs down really small.

http://direct2trade.co.nz/dewalt-dwx723-xe-mitre-saw-stand

Also - dont buy a cheap one - its not worth it in the end. Buy a Hitachi, Makita or DeWalt and it will be the last one you buy.

st2



7 posts

Wannabe Geek


  # 937922 20-Nov-2013 14:15
Send private message

Thanks for the advise folks.
Will do the rounds of the tool stores this weekend.
Good advise re blades and slider.



 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07


Techweek starting around NZ today
Posted 20-May-2019 09:52


Porirua City Council first to adopt new council software solution Datascape
Posted 15-May-2019 12:00


New survey provides insight into schools' technology challenges and plans
Posted 15-May-2019 09:30


Apple Music now available on Alexa devices in Australia and New Zealand
Posted 15-May-2019 09:11


Make a stand against cyberbullying this Pink Shirt Day
Posted 14-May-2019 20:23


Samsung first TV manufacturer to launch the Apple TV App and Airplay 2
Posted 14-May-2019 20:11


Vodafone New Zealand sold
Posted 14-May-2019 07:25


Kordia boosts cloud performance with locally-hosted Microsoft Azure ExpressRoute
Posted 8-May-2019 10:25


Microsoft Azure ExpressRoute in New Zealand opens up faster, more secure internet for Kiwi businesses
Posted 8-May-2019 09:39


Vocus Communications to deliver Microsoft Azure Cloud Solutions through Azure ExpressRoute
Posted 8-May-2019 09:25


Independent NZ feature film #statusPending to premiere during WLG-X
Posted 6-May-2019 22:13


The ultimate dog photoshoot with Nokia 9 PureView #ForgottenDogsofInstagram
Posted 6-May-2019 09:41


Nokia 9 PureView available in New Zealand
Posted 6-May-2019 09:06


Motorola Solutions joins local partners to deliver advanced communications network in New Zealand
Posted 30-Apr-2019 21:50



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.