Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


17622 posts

Uber Geek
+1 received by user: 5073

Trusted
Lifetime subscriber

Topic # 142768 24-Mar-2014 11:47
Send private message

Hi There!

We have just got a bill from our "new" plumber for $400 + GST after asking him to come out and look at why our toilet wouldn't stop "filling".

He came directly from our inlaws place, which was 4KM away, said it needed a new washer, but didn't have one on him (WTF!?) and then took 5 weeks to return with them. We asked him
multiple times to post it out as replacement was very simple. He came back and replaced it after our 5th chase up call. 

We have a $320 labour bill and $80 for 2 washers!

They won't reply back to us or take our calls for some reason!


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3 | 4
5853 posts

Uber Geek
+1 received by user: 1759

Trusted

  Reply # 1011707 24-Mar-2014 11:51
Send private message

http://www.cab.org.nz/vat/consumer/services/Pages/Generalproblemswithservices.aspx

Not very kind of the plumber. I would expect for the time delays he would have at least fixed it and not over charged you.




Steam: Coil (Same photos as profile here)
Origin: Scranax
Currently playing on PC: Rust, Subnautica, CS:GO, AOE2 HD, BeamNG Drive, BF1.


12695 posts

Uber Geek
+1 received by user: 5980

Trusted

  Reply # 1011710 24-Mar-2014 11:59
One person supports this post
Send private message

$40 each for Stopcock washers, holly heck are the Titanium implanted. Sheesh Also $320 for labour seems a tad steep, lets see, Ariive at home, locate water toby, turn off toby, detach Stopcock and pull plunger out of the unit, remove old washer, reassemble
and reinstall. Turn on toby and test. I have done this multiple times and it takes about  30 minutes.




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


3683 posts

Uber Geek
+1 received by user: 1193


  Reply # 1011713 24-Mar-2014 12:04
Send private message

I did this myself , having had a friend who was a plumber show me how. 

I think the rubber washer was $3.00, time was 10 minutes tops, maybe. 

Not sure if it was the exact same thing you had done though.   

One thing though -- those washers are garbage -- they get 'blistering' which causes them to leak.  I can't believe they can't make a washer that doesn't blister after a year. 


14215 posts

Uber Geek
+1 received by user: 1828


  Reply # 1011738 24-Mar-2014 12:43
Send private message

surfisup1000: I did this myself , having had a friend who was a plumber show me how. 

I think the rubber washer was $3.00, time was 10 minutes tops, maybe. 

Not sure if it was the exact same thing you had done though.   

One thing though -- those washers are garbage -- they get 'blistering' which causes them to leak.  I can't believe they can't make a washer that doesn't blister after a year. 



I know what you mean. These washers that are supplied in NZ are rubbish, after only about a year they get litters in them. The plumbing shop also charge an arm and leg for them, as you have to get a kit, with things you don't need. Instead I now just buy them off eBay for a fraction of the price.

14215 posts

Uber Geek
+1 received by user: 1828


  Reply # 1011741 24-Mar-2014 12:46
Send private message

networkn: Hi There!

We have just got a bill from our "new" plumber for $400 + GST after asking him to come out and look at why our toilet wouldn't stop "filling".

He came directly from our inlaws place, which was 4KM away, said it needed a new washer, but didn't have one on him (WTF!?) and then took 5 weeks to return with them. We asked him
multiple times to post it out as replacement was very simple. He came back and replaced it after our 5th chase up call. 

We have a $320 labour bill and $80 for 2 washers!

They won't reply back to us or take our calls for some reason!



I believe if they didn't initially give you a quote or estimate for the job, then they can only charge you a reasonable price. So ask plumbers what they charge for that work, then write a letter to the plumbers saying what this is what others will charge and say what you are willing to pay.

gzt

10038 posts

Uber Geek
+1 received by user: 1518


  Reply # 1011744 24-Mar-2014 12:49
One person supports this post
Send private message

networkn: We have just got a bill from our "new" plumber for $400 + GST after asking him to come out and look at why our toilet wouldn't stop "filling".

I'd suggest starting by surreptitiously finding out what their minimum call out fee and hourly rate is and working backwards to see if it is reasonable by their own yardstick.

At the end you'll just have to nominate a figure and send them that with a letter describing the situation and the basis of your calculation. Or just the letter offering settlement.

gzt

10038 posts

Uber Geek
+1 received by user: 1518


  Reply # 1011748 24-Mar-2014 12:52
One person supports this post
Send private message

mattwnz: The plumbing shop also charge an arm and leg for them, as you have to get a kit, with things you don't need. Instead I now just buy them off eBay for a fraction of the price.

This brand has a display in all NZ major hardware stores: eg;

http://www.fixatap.com.au/product/seating-washer-suits-caroma-and-dux-cisterns/226167

Most around $6-7.

1982 posts

Uber Geek
+1 received by user: 328

Trusted

  Reply # 1011758 24-Mar-2014 13:10
Send private message

KiwiNZ: $40 each for Stopcock washers, holly heck are the Titanium implanted. Sheesh Also $320 for labour seems a tad steep, lets see, Ariive at home, locate water toby, turn off toby, detach Stopcock and pull plunger out of the unit, remove old washer, reassemble
and reinstall. Turn on toby and test. I have done this multiple times and it takes about  30 minutes.


If the cistern keeps filling (as OP said) then the plumber can shut off water at the stopcock for the cistern, no need to locate the houses' toby - a very quick job

2495 posts

Uber Geek
+1 received by user: 311


  Reply # 1011760 24-Mar-2014 13:16
One person supports this post
Send private message

networkn:  He came back and replaced it after our 5th chase up call.


Maybe he's an ex lawyer and charged you 15 mins for each call out of habit.

12695 posts

Uber Geek
+1 received by user: 5980

Trusted

  Reply # 1011766 24-Mar-2014 13:20
Send private message

nickb800:
KiwiNZ: $40 each for Stopcock washers, holly heck are the Titanium implanted. Sheesh Also $320 for labour seems a tad steep, lets see, Ariive at home, locate water toby, turn off toby, detach Stopcock and pull plunger out of the unit, remove old washer, reassemble
and reinstall. Turn on toby and test. I have done this multiple times and it takes about  30 minutes.


If the cistern keeps filling (as OP said) then the plumber can shut off water at the stopcock for the cistern, no need to locate the houses' toby - a very quick job


Some installations don't have the isolating vale for the cistern




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


Banana?
4363 posts

Uber Geek
+1 received by user: 1032

Subscriber

  Reply # 1011785 24-Mar-2014 14:00
Send private message

Crikey, that is expensive! Definitely too much.

We just DIYed a new Cistern for ours (the plastic flimsy flush apparatus in the old one broke) - $125 all up for a new cistern, about 30 minutes to install it. Luckily we have solid wood walls, so screwing it in was easy, and we had a flexible hose from the tap to the cistern.

14215 posts

Uber Geek
+1 received by user: 1828


  Reply # 1011815 24-Mar-2014 14:50
Send private message

gzt:
mattwnz: The plumbing shop also charge an arm and leg for them, as you have to get a kit, with things you don't need. Instead I now just buy them off eBay for a fraction of the price.

This brand has a display in all NZ major hardware stores: eg;

http://www.fixatap.com.au/product/seating-washer-suits-caroma-and-dux-cisterns/226167

Most around $6-7.


Not the same part that I have a problem wth, as that is basically a foam washer. I have replaced a few of those and they are reasonably reliable.
The part which keeps getting blisters is a clear silicon washer that is part of the flush value, and it only takes about a year before it develops water filled blisters on it, which cause it to contently leak. I an pop the blister but it fills up again. Flush valves also don't last long as they slit alount the membrane fold after a year or two. In NZ there is only one company that has parts for my toilets (European made), and they charge about $60-$70 plus freight, where I can get the part on ebay for about $15 deliviered.

Mad Scientist
18706 posts

Uber Geek
+1 received by user: 2381

Trusted
Lifetime subscriber

  Reply # 1011843 24-Mar-2014 15:18
Send private message

I'm allergic to plumbers for that very reason. Same allergy to lawyers except our current one seems to have a flat rate for a service. Went to neave lane lawyers in Christchurch and was about 1k out of pocket with each unsuccessful house offer!

Anyone knows a reasonable plumber in Dunedin?

2908 posts

Uber Geek
+1 received by user: 1099

Subscriber

  Reply # 1012128 24-Mar-2014 23:28
Send private message

Did they give a detailed breakdown of the bill? Maybe they spent ages driving around town trying to find out who stocked those particular washers.

Also does your invoice state exactly what washers they are brand and part code ect? So I can look them up myself. Asking since im a Plumber / Gasfitter myself. Partly so you could see what i would have to pay for them, And if you have an oddball toilet, So I will know where to go to if I also get asked to fix one.

Thanks.

And Im based in Auckland so can't help with who to contact in Dunedin.

4433 posts

Uber Geek
+1 received by user: 834

Trusted
Lifetime subscriber

  Reply # 1012137 24-Mar-2014 23:58
Send private message

Pictures?





 1 | 2 | 3 | 4
View this topic in a long page with up to 500 replies per page Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new NUC kits and NUC mini PCs
Posted 16-Aug-2018 11:03


The Warehouse leaps into the AI future with Google
Posted 15-Aug-2018 17:56


Targus set sights on enterprise and consumer growth in New Zealand
Posted 13-Aug-2018 13:47


Huawei to distribute nova 3i in New Zealand
Posted 9-Aug-2018 16:23


Home robot Vector to be available in New Zealand stores
Posted 9-Aug-2018 14:47


Panasonic announces new 2018 OLED TV line up
Posted 7-Aug-2018 16:38


Kordia completes first live 4K TV broadcast
Posted 1-Aug-2018 13:00


Schools get safer and smarter internet with Managed Network Upgrade
Posted 30-Jul-2018 20:01


DNC wants a safer .nz in the coming year
Posted 26-Jul-2018 16:08


Auldhouse becomes an AWS Authorised Training Delivery Partner in New Zealand
Posted 26-Jul-2018 15:55


Rakuten Kobo launches Kobo Clara HD entry level reader
Posted 26-Jul-2018 15:44


Kiwi team reaches semi-finals at the Microsoft Imagine Cup
Posted 26-Jul-2018 15:38


KidsCan App to Help Kiwi Children in Need
Posted 26-Jul-2018 15:32


FUJIFILM announces new high-performance lenses
Posted 24-Jul-2018 14:57


New FUJIFILM XF10 introduces square mode for Instagram sharing
Posted 24-Jul-2018 14:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.