Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




732 posts

Ultimate Geek
+1 received by user: 318

Subscriber

Topic # 144150 8-May-2014 22:25
Send private message

I am looking for a small hobby drill from drilling PCBs.

These typically run up to 10,000 rpm with 0.5mm - 1mm drill bits though you can also get them with 3mm shanks

NOT wanting a Dremmel 

If I can find an NZ supplier for a realistic price all well and good, but I may look at aliexpress or other Chinese sites if needed

I am already importing a logic analyser , eprom eraser, eprom/GAL/uP programmer etc from aliexpress but the weight
of the drill makes shipping expensive

TIA

Create new topic
2254 posts

Uber Geek
+1 received by user: 640

Trusted
Subscriber

  Reply # 1040593 9-May-2014 09:33
Send private message

Not quite sure what yopu mean by 'I don't want a Dremel'.

I got one of these from Mitre10 for about $50 (from memory) a year ago and it suits me perfectly - drilling micro holes, detailed sanding, engraving, etc.  It has batteries that last about 10 mins, or you can use it plugged in.  Not the lightest thing in the world, but I'm happy for the price.

http://www.direct2public.co.uk/ebay/harveys/67096c-html.jpg




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

144 posts

Master Geek
+1 received by user: 20


  Reply # 1040647 9-May-2014 10:01
Send private message

I adopted one of laser printers engines running on 12v and 1.5 mm clip.
Here is example http://www.trademe.co.nz/electronics-photography/other-electronics/electronic-components/other/auction-724742663.htm

Works fine :)

 
 
 
 


698 posts

Ultimate Geek
+1 received by user: 399

Trusted

  Reply # 1040714 9-May-2014 11:00
Send private message

I'm also curious - why not a Dremel? The interchangeable bits and variable speed makes it a really good choice... mine has a sort of wand attachment that lets me use it sort of like a pen. You can do really fine work with it.






732 posts

Ultimate Geek
+1 received by user: 318

Subscriber

  Reply # 1040945 9-May-2014 17:32
Send private message

Dynamic: Not quite sure what yopu mean by 'I don't want a Dremel'.

I got one of these from Mitre10 for about $50 (from memory) a year ago and it suits me perfectly - drilling micro holes, detailed sanding, engraving, etc.  It has batteries that last about 10 mins, or you can use it plugged in.  Not the lightest thing in the world, but I'm happy for the price.

http://www.direct2public.co.uk/ebay/harveys/67096c-html.jpg


I have one ( a dremmell clone) and yes its good for a number of jobs, but I have over the years (at work) spent many hours drilling PCBs and 
a good drill press is MUCH nicer to use.


360 posts

Ultimate Geek
+1 received by user: 96


  Reply # 1041025 9-May-2014 19:04

What about getting a drill press for your Dremel clone?

20192 posts

Uber Geek
+1 received by user: 3785

Trusted
Subscriber

  Reply # 1041067 9-May-2014 19:37
One person supports this post
Send private message

Demeter: I'm also curious - why not a Dremel?


Overpriced junk IME with them.

I use a foredom but there are loads of fakes around the place that are rattly loose rubbish too.




Richard rich.ms



732 posts

Ultimate Geek
+1 received by user: 318

Subscriber

  Reply # 1041261 10-May-2014 10:47
Send private message

k1w1k1d: What about getting a drill press for your Dremel clone?


The small drill press at work has done hundreds of hours of work drilling PCBs for over 25 years, a Dremel would never last this long.

Did you know for example the cheap drills, sanders, skill saws etc are designed to last about 20 hours, i.e. for the home owner YEARS of use.
The warranties for these tools exclude commercial use because they know they would die within weeks.

As always you pay for what you get.

2247 posts

Uber Geek
+1 received by user: 492

Subscriber

  Reply # 1041353 10-May-2014 15:29
Send private message
2246 posts

Uber Geek
+1 received by user: 895


  Reply # 1041384 10-May-2014 16:28
Send private message

I use my Dremel for that sort of work, and it works fine for that sort of work. You can also get a mini drill-press type thing that holds the Dremel fairly cheaply. Mine was about (from memory) $60 from Mitre 10. For small hobby PCB drilling of the type you describve, it sounds pretty much like the right set-up to me. For information, googling "Dremel Drill Press" brings up some pictures of the one I have almost as the first search result.

I also have a cheapie Dremel clone (from memory, from Super Cheap Auto) that I brought to use when I didn't want to damage/flog the Dremmel. Cost about $35, including case and flexi-shaft etc. While it has had what many would consider fairly light use, it has been going strong for 7-8 years without problems. If you don't like the price of Dremel, you could look at one of the cheap clones. However, I have no idea whether it would fit in my Dremel-press, as I have never tried this.

Edit: Spelling

3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 1041701 11-May-2014 13:43
Send private message

I'm in Auckland and have a small PCB drill with a stand/press.  It is made from plastic, not metal like the industrial ones, but it works well and I have not used it much.  Actually, not used for quite some time but is clean/tidy.  I've bought it when I was in school.  Let me know if you are interested, or if you are after something more solid/expensive.




You can never have enough Volvos!


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel unveils the 8th Gen Intel Core Processor family for desktop
Posted 25-Sep-2017 19:45


Chow brothers plan to invest NZ$100 million in technology
Posted 24-Sep-2017 16:24


Symantec protects data everywhere with Information Centric Security
Posted 21-Sep-2017 15:33


FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.