Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




327 posts

Ultimate Geek
+1 received by user: 16


Topic # 150597 28-Jul-2014 07:53
Send private message

So im looking at getting a air compressor to clean out the dust in my case. But im unsure about the type i should be getting. Don't want anything big something small but enough power to what i want. ideas?




Balm its gone!

Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
5246 posts

Uber Geek
+1 received by user: 2484


  Reply # 1096861 28-Jul-2014 08:10
Send private message

For extended cleaning using an air-gun, unfortunately the bigger the compressor the better.  I use an inexpensive 120l/m cheap direct drive compressor (Supercheap Black Ridge brand) which has (IIRC) about a 40l tank.  It's barely enough to blow out the interior of a car - need to stop several times to let it come up to pressure.  I have been using it for blowing dust from surfaces when sanding/painting etc, but in that case it's only blowing for a few seconds.
I've just bought a compact electric/battery blower - waiting for it to be delivered.  I suspect that's going to be more useful than the compressor for such jobs.

Edit to say - I misread "my case" as "my cars" - doh.
What case?  For blowing out a toolbox/instrument case etc - one of the small cheap compressors as above would be absolutely fine.

2499 posts

Uber Geek
+1 received by user: 927

Subscriber

  Reply # 1096862 28-Jul-2014 08:26
One person supports this post
Send private message

You could just get a can of air if it's a one off, probably cheaper, assuming whatever case it is is relatively small.




Windows 7 x64 // i5-3570K // 16GB DDR3-1600 // GTX660Ti 2GB // Samsung 830 120GB SSD // OCZ Agility4 120GB SSD // Samsung U28D590D @ 3840x2160 & Asus PB278Q @ 2560x1440
Samsung Galaxy S5 SM-G900I w/Spark

 
 
 
 


2316 posts

Uber Geek
+1 received by user: 665

Trusted
Subscriber

  Reply # 1096866 28-Jul-2014 08:38
Send private message

That seems like an expensive way to clean one PC.  A can of air is relatively expensive, but so id having a compressor in the garage not being used.




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

gzt

9267 posts

Uber Geek
+1 received by user: 1320


  Reply # 1096893 28-Jul-2014 09:25
Send private message

Imho can of air used carefully. Just regard it as an operating expense. It is only worthwhile if done regularly.

Fully Operational
3343 posts

Uber Geek
+1 received by user: 1088

Trusted
Vocus
Subscriber

  Reply # 1096910 28-Jul-2014 09:55
Send private message

Good idea when using compressed air to clean out your PC is having a vacuum cleaner nozzle nearby to suck away the dust cloud.  If you're careful a can of air will clean out a lot of PCs, or one PC a lot of times.

DKe

24 posts

Geek
+1 received by user: 7


  Reply # 1096911 28-Jul-2014 09:57
Send private message

I use this: https://www.camera-camera.com/lenses-and-accessories/lens-accessories/lens-cleaners/sky-digi-super-blower.html for a small space/area.

For more power or larger area, then I use a small air compressor similar to what the others have said.


13451 posts

Uber Geek
+1 received by user: 2275

Trusted

  Reply # 1096912 28-Jul-2014 09:57
Send private message

What case? Violin case, PC case, etc.




AWS Certified Solution Architect Professional, Sysop Administrator Associate, and Developer Associate
TOGAF certified enterprise architect
Professional photographer




327 posts

Ultimate Geek
+1 received by user: 16


  Reply # 1096966 28-Jul-2014 10:27
Send private message

Have used can of air in the past and wasnt happy with the results, not look at getting a 1200$ compressor something around 100-150$. Just after some details like how powerful it would need to be.




Balm its gone!

2316 posts

Uber Geek
+1 received by user: 665

Trusted
Subscriber

  Reply # 1096972 28-Jul-2014 10:35
Send private message

waikariboy: Have used can of air in the past and wasnt happy with the results, not look at getting a 1200$ compressor something around 100-150$. Just after some details like how powerful it would need to be.

Anything requiring two hands to lift (with an air tank) will be fine.  The motor charges up the tank so you have a good few squirts before the engine kicks in once more to top up the tank.

They are really noisy, so we charge our tank up and then when the motor stops we switch the jolly thing off.

The instructions should tell you, but remember to empty the tank when done, otherwise condensation forms and the tank rusts from the inside out.




"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams



327 posts

Ultimate Geek
+1 received by user: 16


  Reply # 1097019 28-Jul-2014 11:58
Send private message

Dynamic:
waikariboy: Have used can of air in the past and wasnt happy with the results, not look at getting a 1200$ compressor something around 100-150$. Just after some details like how powerful it would need to be.

Anything requiring two hands to lift (with an air tank) will be fine.  The motor charges up the tank so you have a good few squirts before the engine kicks in once more to top up the tank.

They are really noisy, so we charge our tank up and then when the motor stops we switch the jolly thing off.

The instructions should tell you, but remember to empty the tank when done, otherwise condensation forms and the tank rusts from the inside out.


Cheers.




Balm its gone!

gzt

9267 posts

Uber Geek
+1 received by user: 1320


  Reply # 1097206 28-Jul-2014 16:12
Send private message

Dynamic:

How do you ensure water moisture (and oil to a lesser degree) are minimised?

2316 posts

Uber Geek
+1 received by user: 665

Trusted
Subscriber

  Reply # 1097218 28-Jul-2014 16:22
Send private message

gzt:
Dynamic:

How do you ensure water moisture (and oil to a lesser degree) are minimised?

Any compressor with a tank (in my experience) will have a valve on the bottom that you can loosen to let the air and any moisture drain.  Our compressor is used only once a week, and a note I put on it indicates the valve should be left open when finished.

I suspect this is even more important with cheap imported compressors as the tank walls are likely to be thinner.





"4 wheels move the body.  2 wheels move the soul."

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

gzt

9267 posts

Uber Geek
+1 received by user: 1320


  Reply # 1097231 28-Jul-2014 16:36
Send private message

Imho that is not going to do it, it's just built up condensation inside the compressor. Imho if you are using something like that you need a decent oil and decent mositure filter on the output. The other option is the expensive kind of compressor built for oil free and moisture free operation.

3267 posts

Uber Geek
+1 received by user: 77

Trusted

  Reply # 1097261 28-Jul-2014 17:39
Send private message

On a practical note, it is fun blowing air through a fan but do it only briefly a few times or else you will either kill the bearing or snap off a fin - been there done that.




You can never have enough Volvos!


JWR

730 posts

Ultimate Geek
+1 received by user: 236


  Reply # 1097379 28-Jul-2014 19:24
Send private message

Niel: On a practical note, it is fun blowing air through a fan but do it only briefly a few times or else you will either kill the bearing or snap off a fin - been there done that.


Might be fun. But, I wouldn't do that at all.

You don't want to mess up your CPU fan.

 1 | 2
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand hits peak broadband data
Posted 18-Jan-2018 12:21


Amazon Echo devices coming to New Zealand early February 2018
Posted 18-Jan-2018 10:53


$3.74 million for new electric vehicles in New Zealand
Posted 17-Jan-2018 11:27


Nova 2i: Value, not excitement from Huawei
Posted 17-Jan-2018 09:02


Less news in Facebook News Feed revamp
Posted 15-Jan-2018 13:15


Australian Government contract awarded to Datacom Connect
Posted 11-Jan-2018 08:37


Why New Zealand needs a chief technology officer
Posted 6-Jan-2018 13:59


Amazon release Silk Browser and Firefox for Fire TV
Posted 21-Dec-2017 13:42


New Chief Technology Officer role created
Posted 19-Dec-2017 22:18


All I want for Christmas is a new EV
Posted 19-Dec-2017 19:54


How clever is this: AI will create 2.3 million jobs by 2020
Posted 19-Dec-2017 19:52


NOW to deploy SD-WAN to regional councils
Posted 19-Dec-2017 19:46


Mobile market competition issues ComCom should watch
Posted 18-Dec-2017 10:52


New Zealand government to create digital advisory group
Posted 16-Dec-2017 08:47


Australia datum changes means whole country moving 1.8 metres north-east
Posted 16-Dec-2017 08:39



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.