Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1491 posts

Uber Geek
+1 received by user: 350

Trusted

# 173542 27-May-2015 09:59
Send private message

Needing to do some renovations to the house, but not able to go down the route of spending 20K for a bathroom.

Has anyone done similar jobs recently and have a rough idea of how much it cost?  Obviously all jobs are different, just a rough idea.

Ensuite - new shower, , floor tiling, mini vanity, toilet, fittings.  Building/carpentry to make shower area into more of a wet room if possible.

Bathroom - 10 sqm tiling, some carpentry around the existing bath, new vanity and fittings, toilet,

Kitchen - New workbench, cupboard doors, some carpentry & plumbing to add a dishwasher, cooker, sink, rangehood, splashback, 5sqm of tiling.

Would it be possible to get all that for ~20K, with minimal DIY?

Edit: looks like it might be do-able for under 40k, 20k was way too optimistic.

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3 | 4 | 5 | 6 | 7
2091 posts

Uber Geek
+1 received by user: 849


  # 1312510 27-May-2015 10:10
Send private message

You do mean each right?

Bathrooms can cost $5k to $100k depending entirely on your quality level.

We did an ensuite and 2 bathrooms including building (moving walls), tiling, finishing, vanities, bath, 2 showers etc. That cost us close to $40k. We bought Athena fittings/bath and decent vanities at the bathroom sale at Greenlane. We saved a lot on the building work.

Our kitchen was probably around $15k for cabinets, tiling and plumbing. We didn't get a stone workbench or anything. We were very lucky to get a considerable amount of interior work (moving a wall, new steel beams etc) done labour free.

We have had friends spend $30k on a single bathroom, italian everything etc. You can spend $80 on a toilet or $800 on a toilet. Kitchens are the same. Granite benchtop is thousands, laminate is a few hundred.

The above probably isn't really helpful, just what we experienced.



1491 posts

Uber Geek
+1 received by user: 350

Trusted

  # 1312515 27-May-2015 10:14
Send private message

That's helpful.  Was looking at 20K for everything, using existing plumbing and standard fittings etc.

 
 
 
 


13945 posts

Uber Geek
+1 received by user: 6696

Trusted
Subscriber

  # 1312517 27-May-2015 10:16
2 people support this post
Send private message

We are in the process of pricing to do a wet area disability bathroom in our home, the estimates would seem to be around $18,000




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

Using empathy takes no energy and can gain so much. Try it.

 

 


14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1312525 27-May-2015 10:26
One person supports this post
Send private message

A few years ago we stripped and redid our bathroom, 2x4m. It included new smaller PVC exterior window and weatherboards, tiles, under floor heating, toilet, LED lighting and mirror lighting, great shower, new high pressure hot water system, double basin, bath, moving cylinder to ceiling cavity and plumbing. Cost around $40K.

I wouldn't recommend tiles, they MUST be heated otherwise they're awful. Lino tiles are a better idea.

Doing it cheaply you might get it done for $50K. Wouldn't surprise me if just materials cost more than $20K, maybe more than $30K if you went for good quality. To get a good firm in to do all that you could easily spend $100K, but if you hire an individual builder and cheap out on everything you can probably keep it below $50K.

4974 posts

Uber Geek
+1 received by user: 3655

Trusted
Lifetime subscriber

  # 1312526 27-May-2015 10:28
Send private message

jonb: ... Would it be possible to get all that for ~20K, with minimal DIY?


The short answer is no.

We recently renovated two bathrooms in the same house (1918 vintage). Completely stripped and relined and retiled. Good quality but no luxuries (except underfloor heating). $70,000 for both.

Perhaps $20,000 for each project, if you're careful with your money.




Sideface


8532 posts

Uber Geek
+1 received by user: 2928

Lifetime subscriber

  # 1312528 27-May-2015 10:29
Send private message

Nope, in the end it will probably be close to double that.

Our bathroom in out 1950's house cost 20k, that was quality fittings and units, was all new plumbing and tiled throughout.

Thats was for a 2x2m room and a 1x2m toilet

20182 posts

Uber Geek
+1 received by user: 6173

Trusted
Lifetime subscriber

  # 1312531 27-May-2015 10:31
Send private message

jonb: That's helpful.  Was looking at 20K for everything, using existing plumbing and standard fittings etc.


Based on what we did which was FAIRLY modest, though with new everything, I'd say you have little hope for a good quality nice looking fit out of TWO bathrooms for <$20K but everyones expectations differ and it will depend on what compromises you are prepared to make to meet the budget. 

Electrical, Plumbing etc, costs were a lot more than we initially budgeted. Even our tiler quoted a price, but due to unforseen complications came in about 22% over budget. 


 
 
 
 


2814 posts

Uber Geek
+1 received by user: 1373

Lifetime subscriber

  # 1312553 27-May-2015 10:58
Send private message

Wet floor requires special (i.e. expensive) waterproofing, unless its a concrete floor.


20182 posts

Uber Geek
+1 received by user: 6173

Trusted
Lifetime subscriber

  # 1312584 27-May-2015 11:06
Send private message

networkn:
jonb: That's helpful.  Was looking at 20K for everything, using existing plumbing and standard fittings etc.


Based on what we did which was FAIRLY modest, though with new everything, I'd say you have little hope for a good quality nice looking fit out of TWO bathrooms for <$20K but everyones expectations differ and it will depend on what compromises you are prepared to make to meet the budget. 

Electrical, Plumbing etc, costs were a lot more than we initially budgeted. Even our tiler quoted a price, but due to unforseen complications came in about 22% over budget. 



I'd say it was some of the best money we spend in our house, but upon reflection I wish we had spent a little more as 5 years on, some elements aren't holding up as well.

Find a GOOD tiler (Who does a LOT of bathrooms). We had a cheap(ish) one, and the tiles aren't perfect and it annoys me every day. I may well get someone in to redo it sometime.

Re Tiles, imagine that tiles in a small bathroom (In fact any room) look darker (Considerably) than they do in the shop, or in any part of the house. 



255 posts

Ultimate Geek
+1 received by user: 53


  # 1312586 27-May-2015 11:08
Send private message

Agree with above on it being $20K each based on your requirements. With regards to the bathroom also agree with above that tiling is an expensive option if you are trying to do it on a budget. It isn't the tiles themselves, it is the tiling and waterproofing work associated with them that costs.

We did what I would class as an average spec,  full renovation on a 2.5m x 4.5m bathroom at the start of this year. This did involve relocating the shower and vanity plumbing so a bit of extra cost there. Having a very quick look back here are some of the bigger items - not comprehensive but may give you an idea of where the money goes.........

Vanity and Tapware (Shower and Vanity) - 2000 (decided not to cheap out on the shower mixer, didn't want to be pulling the walls apart if it fails)
Shower Tray (Foam for Tiles) and Glass - 1531
Plumbing - 1603 to pre-line, 370 to completion
Tiles - 400 (shower and half the walls
Lino flooring - 500 (estimate as don't have details) Went with Gefloor Texline, very pleased with it so far. Warm and soft.
Waterproofing and Tiling - 3000
Shower Glass installation - 400
Builder - 8300 (includes re-lining walls and ceiling, concrete channeling in floor for plumbing)
Electrician - 1000
Rubbish Removal - 150
That's about 19.2K, there was some bits and pieces I haven't detailed here so it would of

2814 posts

Uber Geek
+1 received by user: 1373

Lifetime subscriber

  # 1312623 27-May-2015 11:43
2 people support this post
Send private message

Suggest you think about a shower dome... not terribly expensive, but it makes the shower much warmer, and stops the moisture getting out into the bathroom. I expect it will prevent any mould problems.


20182 posts

Uber Geek
+1 received by user: 6173

Trusted
Lifetime subscriber

  # 1312635 27-May-2015 11:49
Send private message

frankv: Suggest you think about a shower dome... not terribly expensive, but it makes the shower much warmer, and stops the moisture getting out into the bathroom. I expect it will prevent any mould problems.



Entirely disagree. We had one, it was a nightmare, sadly I can't recall why that much, but I have foggy memory of it causing mould in serious quantities. 




1491 posts

Uber Geek
+1 received by user: 350

Trusted

  # 1312653 27-May-2015 12:31
Send private message

Thanks, seems like will need to raise budget or do in increments. Do you have experience of getting builder, plumber, fitter, tiler individually compared to a one stop bathroom shop?

255 posts

Ultimate Geek
+1 received by user: 53


  # 1312655 27-May-2015 12:38
One person supports this post
Send private message

The only experience I have had with a one stop shop is complete bathrooms. Got a quote (maybe $22K). When I asked for a high level breakdown of the quote I never heard from them again.......

I have been lucky enough to find who I think is an awesome builder. The other trades have been done by the guys he works with all the time. As we trusted the builder we inherently trusted them. And to date we haven't been disappointed.

If you get a builder who does bathrooms often they should also have people they work with all the time.

14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1312658 27-May-2015 12:39
Send private message

We had a bathroom firm who managed all that. Even then there were days nothing happened, out doing work at other properties. You pay for their project management but they take away all the hassles.

 1 | 2 | 3 | 4 | 5 | 6 | 7
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32


Epson launches new 4K Pro-UHD projector technology
Posted 1-Jun-2019 15:26


Lenovo and Qualcomm unveil first 5G PC called Project Limitless
Posted 28-May-2019 20:23


Intel introduces new 10th Gen Intel Core Processors and Project Athena
Posted 28-May-2019 19:28


Orcon first to trial residential 10Gbps broadband
Posted 28-May-2019 11:20


Video game market in New Zealand passes half billion dollar mark
Posted 24-May-2019 16:15


WLG-X festival to celebrate creativity and innovation
Posted 22-May-2019 17:53


HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.