Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




Onward
11287 posts

Uber Geek
+1 received by user: 5013

Trusted
Subscriber

Topic # 185826 7-Dec-2015 10:36
Send private message

We are wanting to spay paint some pine furniture that looks like refugees from the 70s/80s. We purchased a Airless Spray gun from Mitre 10 but when we got home we noticed in the fine print that it says its for things like
spraying garage doors, fences etc.
Now I know next to nothing about these devices, will this do the furniture or is there a reason it wont? do I need to get a different spray gun to do this sort of work?




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
20265 posts

Uber Geek
+1 received by user: 3825

Trusted
Subscriber

  Reply # 1441864 7-Dec-2015 10:40
Send private message

Angle that they will work at can be a problem.

I got one to do the cieling of a garage, all the beams for upstairs and the particle board were a pain with a roller because of all the corners. Problem is as soon as its pointed up, it stopped working. Just started to chuck out giant globs of paint instead of an even stream of small bits.




Richard rich.ms



Onward
11287 posts

Uber Geek
+1 received by user: 5013

Trusted
Subscriber

  Reply # 1441867 7-Dec-2015 10:46
Send private message

richms: Angle that they will work at can be a problem.

I got one to do the cieling of a garage, all the beams for upstairs and the particle board were a pain with a roller because of all the corners. Problem is as soon as its pointed up, it stopped working. Just started to chuck out giant globs of paint instead of an even stream of small bits.


Its to do small jobs like a couple of dressers, a coffee table (aka shin destroyer) and two side tables. I /we can do this I think with out pointing the gun upwards. It will point downwards a bit though .




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


 
 
 
 


20265 posts

Uber Geek
+1 received by user: 3825

Trusted
Subscriber

  Reply # 1441869 7-Dec-2015 10:48
Send private message

See how it goes. Also the paint has to be the exact thickness to work. Tiny bit either way and its either like painting with milk or else it just dribbles out and down the front of the gun instead of spraying.




Richard rich.ms



Onward
11287 posts

Uber Geek
+1 received by user: 5013

Trusted
Subscriber

  Reply # 1441874 7-Dec-2015 10:55
Send private message

richms: See how it goes. Also the paint has to be the exact thickness to work. Tiny bit either way and its either like painting with milk or else it just dribbles out and down the front of the gun instead of spraying.


I think the fence behind the garage is going to have a bit of test spray on it :)




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


9779 posts

Uber Geek
+1 received by user: 1515

Trusted

  Reply # 1441882 7-Dec-2015 11:08
Send private message

I take the garage doors, fences, as an indicator of small, consumer jobs. I guess you could paint a house if that was done in bite sizes pieces. Good to know about angles though. Very handy for inside cupboards, but maybe not if it needs to be horizontal as you couldnt paint the under shelves. Or could you get round that with a consumer spray setup that had a seperate paint tin or allowed an extension to a hand held tin? Im assuming the reason is only that the paint pickup gets air at an angle? 

1770 posts

Uber Geek
+1 received by user: 115


  Reply # 1441902 7-Dec-2015 11:34
Send private message

I would assume that the spray is not super fine so on smaller items might not give a perfect finish. It might be a good option to throw on a quick primer coat but if you care about the final finish being top notch I wouldn't be using something like described. 



Onward
11287 posts

Uber Geek
+1 received by user: 5013

Trusted
Subscriber

  Reply # 1441904 7-Dec-2015 11:38
Send private message

I will need to put a stain sealer undercoat, I may resort back to plan A that was to use fine rollers




Mike
Retired IT Manager. 
The views stated in my posts are my personal views and not that of any other organisation.

 

 It's our only home, lets clean it up then...

 

Take My Advice, Pull Down Your Pants And Slide On The Ice!

 

 


BTR

1324 posts

Uber Geek
+1 received by user: 352

Subscriber

  Reply # 1441907 7-Dec-2015 11:41
Send private message

I would say what you have bought isn't designed for use with furniture as normally you have to spray the underneath which means the spray angles would case issues, for anything thats not up & down and side to side get an air compressor with the correct attachment.  

9779 posts

Uber Geek
+1 received by user: 1515

Trusted

  Reply # 1441910 7-Dec-2015 11:44
Send private message

BTR: I would say what you have bought isn't designed for use with furniture as normally you have to spray the underneath which means the spray angles would case issues, for anything thats not up & down and side to side get an air compressor with the correct attachment.  


A compressor, is that air and paint spray or can you get airless guns as well? Which is better? Airless or air?

20265 posts

Uber Geek
+1 received by user: 3825

Trusted
Subscriber

  Reply # 1441913 7-Dec-2015 11:47
One person supports this post
Send private message

The guns for compressors I have cant do anything as thick as a water based paint, and my experiance trying to spray normal dulux type enamels was a disaster. With car paint, great, and that is my prefered thing for furniture since it sets so much faster and isnt offgassing for a month like cheap enamel from a hardware store.




Richard rich.ms

793 posts

Ultimate Geek
+1 received by user: 33

Subscriber

  Reply # 1441926 7-Dec-2015 11:54
Send private message

One thing to note - the airless sprayers - brand often doesnt matter too much - go for watts of the motor. They all seem to get a bit warm if you do bigger jobs and as they warm I find you need to stop and clean the nozzle a bit more as the paint is setting - to help avoid this once it gets used a bit I often water the paint down just a smidgen more.

In saying that I love airless spray guns - I've used it for outdoor furniture and even for spraying stain onto retaining walls (works really really well here FYI).

793 posts

Ultimate Geek
+1 received by user: 33

Subscriber

  Reply # 1441928 7-Dec-2015 11:56
Send private message

richms: The guns for compressors I have cant do anything as thick as a water based paint, and my experiance trying to spray normal dulux type enamels was a disaster. With car paint, great, and that is my prefered thing for furniture since it sets so much faster and isnt offgassing for a month like cheap enamel from a hardware store.


Yep - tried this multiple times with a multitude of different spray guns I've got quite a good compressor at home and you cant use housepaint at all.

Infrastructure Geek
4043 posts

Uber Geek
+1 received by user: 193

Trusted
Microsoft NZ
Subscriber

  Reply # 1442961 8-Dec-2015 17:14
Send private message

I sprayed several internal doors, a cheap dining table, and more with one of the cheap wagner handhelds from mitre 10.  worked great.  Need to get the paint to the right consistency - takes a little practice at first, but once you get it right then its easy to repeat and you can get an excellent finish for a cheap price.  The small units are easy to clean too.

http://www.mitre10.co.nz/shop/paint_decorating/paint_tools/wagner_finespray_paint_sprayer__108898/




Technical Evangelist
Microsoft NZ
about.me/nzregs
Twitter: @nzregs


106 posts

Master Geek
+1 received by user: 14


  Reply # 1448809 11-Dec-2015 15:33
Send private message

The bigger airless sprayers are awesome if you want to paint a whole house.  No problems with pointing upwards because they suck paint directly out of the pot.

Nothing could be faster*, they are amazing.  Bit of a bugger to clean though....

* Perhaps the Mr Bean trick, if you could get it even enough :)

3060 posts

Uber Geek
+1 received by user: 1122


  Reply # 1450264 14-Dec-2015 17:22
Send private message

You can do it if you are able to move the furniture rather than change the angle of the sprayer. 

For small parts you can hang them on string and spin them as you paint them.

Obviously you can't hang a dresser on string but the principle applies.




Mike

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.