Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 223251 20-Sep-2017 19:52
Send private message quote this post

Can anyone please help me to rewire my phone socket, there is an existing white wire in port 2 which is for the extension, there are two loose wires one is white and I think this is the main phone line in and a light brown wire, I don't know where to put the two loose wires

https://cdn.geekzone.co.nz/imagessubs/blog7cb5410b53a9895a0c0490727257f47f.jpg

Create new topic
540 posts

Ultimate Geek
+1 received by user: 142


  Reply # 1869721 20-Sep-2017 20:09
Send private message quote this post

White and brown are pair 2 incoming. Put either white or brown on the left, and the other one on the right termination.

 

If that doesn't work, remove them and try the Yellow and Black - although I suspect that the white and brown will do it.




4 posts

Wannabe Geek


  Reply # 1869740 20-Sep-2017 20:13
Send private message quote this post

So 1 of the wires in port 1 or 3 and the other wire in 4 or 6?

 
 
 
 


eph

67 posts

Master Geek
+1 received by user: 31


  Reply # 1869741 20-Sep-2017 20:13
Send private message quote this post

How many lines have you got? You only need 2 wires for single phone line (pins 3,4 for line 1) which is your white/blue (pin 4) and blue(/white) (pin 3) wires. They seem to be connected to pin 2,5 which should be line 2... What exactly is not working?

 

 

 

Edit: I see, you are trying to hook up extension through your socket? White/Brown coming from other room and WhiteBlue/Blue incoming (or the other way around)?




4 posts

Wannabe Geek


  Reply # 1869756 20-Sep-2017 20:20
Send private message quote this post

White blue is the extension these were already in place the other wires have come off when I removed the cover so don't not know where They came from



4 posts

Wannabe Geek


  Reply # 1869758 20-Sep-2017 20:22
Send private message quote this post

So I have no phone or internet as I don't know where to put the two wires

eph

67 posts

Master Geek
+1 received by user: 31


  Reply # 1869769 20-Sep-2017 20:34
One person supports this post
Send private message quote this post

I believe toejam316 was correct. Connect white wire to pin 3 and brown to pin 4. If that doesn't work try to swap them around (since we don't know which one is transmit and which receive).


'That VDSL Cat'
6524 posts

Uber Geek
+1 received by user: 1245

Trusted
Spark
Subscriber

  Reply # 1869792 20-Sep-2017 20:46
Send private message quote this post

toejam316:

 

White and brown are pair 2 incoming. Put either white or brown on the left, and the other one on the right termination.

 

If that doesn't work, remove them and try the Yellow and Black - although I suspect that the white and brown will do it.

 

 

 

 

exactly this. that black cable is the 049.

 

 

 

Based on the wear on the white/brown pair it would definitely be your initial goto..

 

Use a punchdown tool, screwdriver can be ugly...





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


2213 posts

Uber Geek
+1 received by user: 219


  Reply # 1869800 20-Sep-2017 21:00
Send private message quote this post

eph:

 

I believe toejam316 was correct. Connect white wire to pin 3 and brown to pin 4. If that doesn't work try to swap them around (since we don't know which one is transmit and which receive).

 

 

There isn't a transmit and receive as such.

 

" Changes to line polarity may occur as follows and customer equipment shall not be affected by such
changes:-
(a) Rearrangements within the network may result in reversal of the line polarity. Customer wiring also
does not necessarily maintain polarity.
(b) Line reversals can occur before during or after the application of ringing and at other times during a
call. "

 

Unless you have a PABX polarity shouldn't matter.


2213 posts

Uber Geek
+1 received by user: 219


  Reply # 1869824 20-Sep-2017 21:42
Send private message quote this post

eph:

 

How many lines have you got? You only need 2 wires for single phone line (pins 3,4 for line 1) which is your white/blue (pin 4) and blue(/white) (pin 3) wires. They seem to be connected to pin 2,5 which should be line 2... What exactly is not working?

 

 

 

Edit: I see, you are trying to hook up extension through your socket? White/Brown coming from other room and WhiteBlue/Blue incoming (or the other way around)?

 

 

Associating pins with line numbers is a wrong idea. The original 3 wire jackpoints had each contact in the socket wired to a slot in the Krone strip 2,5 (the middle slots) were the pair used for the line. Later 2 wire jackpoints were simplified and the Krone strips had 123 commoned and 456 commoned and one line contact in the socket connected to each strip. The capacitor connects to the ringer contact in the socket.

 

The OP's socket looks like a 3 wire type so only 2,5 are available and if they've been spread by pushing wires in with a screwdriver you won't get a reliable connection. The wires should be punched in with the proper tool without stripping the insulation off first. Different gauges can't be used in the same slot. 

 

 


Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone TV — television in the cloud
Posted 17-Oct-2017 19:29


Nokia 8 review: Classy midrange pure Android phone
Posted 16-Oct-2017 07:27


Why carriers might want to embrace Commerce Commission study, MVNOs
Posted 13-Oct-2017 09:42


Fitbit launches Ionic, its health and fitness smartwatch
Posted 12-Oct-2017 15:52


Xero launches machine learning automation to improve coding accuracy for small businesses
Posted 12-Oct-2017 15:45


Bank of New Zealand uses Intel AI to detect financial crime
Posted 12-Oct-2017 15:39


Sony launches Xperia XZ1, a smartphone with real-time 3D capture
Posted 11-Oct-2017 10:26


Notes on Nokia’s phone comeback
Posted 10-Oct-2017 10:06


Air New Zealand begins Inflight Wi-Fi rollout
Posted 9-Oct-2017 20:16


The latest mobile phones in perspective
Posted 9-Oct-2017 18:34


Review: Acronis True Image 2018 — serious backup
Posted 8-Oct-2017 11:22


Lenovo launches ThinkPad Anniversary Edition 25
Posted 7-Oct-2017 23:16


Less fone, more tech as Vodafone gets brand make-over
Posted 6-Oct-2017 08:16


API Talent Achieves AWS MSP Partner Status
Posted 5-Oct-2017 21:20


Stellar Consulting Group now a Domo Partner
Posted 5-Oct-2017 21:03



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.