Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


neb



405 posts

Ultimate Geek
+1 received by user: 52

Subscriber

Topic # 223966 26-Oct-2017 11:56
Send private message quote this post

I have some elderly relatives whose keyrings have engraved stainless steel tags with address and a contact number on them, for Just In Case cases. However, they're being badly mauled by being attached to keyrings, which is otherwise the ideal place to put them because they'll always carry them when they're out. The obvious solution is some sort of hard coating, but I'm not sure what would work best, it has to be resistant to scratching so the engraving details can be read through it, but also protect the tag from damage by the keys around it.

 

 

Does anyone have any suggestions, preferably not too expensive since I only need a cover a few square cm of material? I've got some conformal coating, but I don't know how wear-resistant that is, and then there's an endless variety of clear cover paints, e.g. Mitre10's Home Projects Enamel Satin Clear for $8 which is presumably some OEM brand for which I can't find any details apart from "conveniently sized for small projects". Beyond that there's stuff like PlastiKote Clear which is "Hard-wearing" and "Scratch-resistant", but at that point I'm gambling $15-20 a pop on one of the things I try being appropriate.

 

 

Which is why I'm asking here...

 


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
1335 posts

Uber Geek
+1 received by user: 87

Subscriber

  Reply # 1889785 26-Oct-2017 12:03
Send private message quote this post

Why not switch to those little plastic ones you can get from any lock/key place?

 

Just print off the details and insert them in. 

 

Or you could try a leather (try one of those people who fix shoes/belts/horse gear etc). 

 

 

 

Image result for plastic key ring


neb



405 posts

Ultimate Geek
+1 received by user: 52

Subscriber

  Reply # 1889786 26-Oct-2017 12:05
Send private message quote this post

The stainless steel ones have some sentimental value. Replacing them with something else isn't really an option.

 
 
 
 


neb



405 posts

Ultimate Geek
+1 received by user: 52

Subscriber

  Reply # 1889827 26-Oct-2017 13:52
2 people support this post
Send private message quote this post

I'm actually tempted to get some of this stuff just for the novelty value. I'll have to get several tins of baked beans to aid in the drying process though.

299 posts

Ultimate Geek
+1 received by user: 91


  Reply # 1890850 26-Oct-2017 15:31
Send private message quote this post

Can you spray them with clear coat?

 

A few hardened layers , once they get bad they can be knocked back and re-sprayed?


2060 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 1890869 26-Oct-2017 15:47
One person supports this post
Send private message quote this post

hsvhel:

 

Can you spray them with clear coat?

 

A few hardened layers , once they get bad they can be knocked back and re-sprayed?

 

 

Bunnings has a 2K clear coat from Dulux.  It comes in a special spray can that has a tag to pull for activation.  You then have 24 hrs to use the contents of the can.

 

It is much tougher than the acrylic clear coats available (if you want to try clear coat).


neb



405 posts

Ultimate Geek
+1 received by user: 52

Subscriber

  Reply # 1890873 26-Oct-2017 16:05
Send private message quote this post

graemeh:

Bunnings has a 2K clear coat from Dulux. It comes in a special spray can that has a tag to pull for activation. You then have 24 hrs to use the contents of the can.

 

It is much tougher than the acrylic clear coats available (if you want to try clear coat).

 

 

Hmm, interesting, thanks! So it pre-mixes the hardener as you spray. I was leaning towards some sort of two-component epoxy type solution like POR 15, but they tend to be pretty pricey. Unfortunately the Dulux one is pricey too, and once it's activated you have to use it fairly quickly. Another option was ProtectaClear, which is storable, but you have to order it from overseas and it then costs about the same as the Dulux with shipping.

 

 

The automotive protection area seems to be the most promising though.

68 posts

Master Geek
+1 received by user: 13


  Reply # 1890875 26-Oct-2017 16:10
Send private message quote this post

A couple of options. Just push the stainless steel tag into a bit of thin clear plastic tubing. Alternatively, put the tag into the plastic holders shown earlier in this thread.

 

Re-engrave the stainless steel and put some white paint in the engraved section to highlight it. Then encase in clear plastic. Our cats Dremel-engraved SS tags have lasted about 20 years without plastic covers. 

 

If you want a durable coating, two pot clear epoxy (eg Araldite ) baked in oven at 60C for several hours is very durable.


2320 posts

Uber Geek
+1 received by user: 532

Subscriber

  Reply # 1890882 26-Oct-2017 16:26
Send private message quote this post

neb: I'm actually tempted to get some of this stuff just for the novelty value. I'll have to get several tins of baked beans to aid in the drying process though.

 

"Use in a well ventilated place or wear a respirator".


263 posts

Ultimate Geek
+1 received by user: 48


  Reply # 1890886 26-Oct-2017 16:46
Send private message quote this post

Engrave it again with a deeper cut, then spray paint it and wipe with cloth to leave only the text showing, this can be done as often as needed. 





2060 posts

Uber Geek
+1 received by user: 225

Subscriber

  Reply # 1890887 26-Oct-2017 16:48
Send private message quote this post

neb: Hmm, interesting, thanks! So it pre-mixes the hardener as you spray. I was leaning towards some sort of two-component epoxy type solution like POR 15, but they tend to be pretty pricey. Unfortunately the Dulux one is pricey too, and once it's activated you have to use it fairly quickly. Another option was ProtectaClear, which is storable, but you have to order it from overseas and it then costs about the same as the Dulux with shipping. The automotive protection area seems to be the most promising though.

 

I thought the Dulux spray is a two component epoxy type solution.  It is very tough though and the same sort of product that you would use when painting a car.


1972 posts

Uber Geek
+1 received by user: 628

Subscriber

  Reply # 1891093 27-Oct-2017 00:07
One person supports this post
Send private message quote this post

pbgben:

 

Engrave it again with a deeper cut, then spray paint it and wipe with cloth to leave only the text showing, this can be done as often as needed. 

 

 

This but use the POR15 instead. As long as the POR15 has a rough surface to "key" into, it is practically impossible to remove once dry. It cures on exposure to moisture from the air. Because of this, it it difficult to reliably reseal a POR15 tin without the remainder going off. (and without it sticking the lid stupidly tight onto the tin) So definitely buy just 1 of the small 100mL tins of it.






neb



405 posts

Ultimate Geek
+1 received by user: 52

Subscriber

  Reply # 1891098 27-Oct-2017 00:39
Send private message quote this post

Aredwood:

So definitely buy just 1 of the small 100mL tins of it.

 

 

Can you get it in 100ml lots? The smallest I've seen are the 250/340ml ones, at pretty hefty prices.

 

 

Silly thing is, I probably need about 10ml of it in total.

1972 posts

Uber Geek
+1 received by user: 628

Subscriber

  Reply # 1891100 27-Oct-2017 01:08
Send private message quote this post

Definitely available in 100ml tins, Ive got one in my garage. Check with Carcolours if you are in Auckland, otherwise a shop that sells panelbeating supplies. Or contact Permanent painted coatings who are the NZ reseller.






20374 posts

Uber Geek
+1 received by user: 3877

Trusted
Subscriber

  Reply # 1891506 27-Oct-2017 19:35
Send private message quote this post

Stick the stainless thing inside some clear heatshrink and shrink it perhaps?





Richard rich.ms

2214 posts

Uber Geek
+1 received by user: 564


  Reply # 1891607 27-Oct-2017 22:54
Send private message quote this post

Have you tried clear nailvarnish ?

Works amazingly well when the car gets small stone nicks as a rust preventative too 👍 #rurallife

 1 | 2
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

New Zealand Ministry of Education chooses Unisys for cloud-based education resourcing management system
Posted 22-Nov-2017 22:00


Business analytics software powers profits for NZ wine producers
Posted 22-Nov-2017 21:52


Pyrios strikes up alliance with Microsoft integrator UC Logiq
Posted 22-Nov-2017 21:51


The New Zealand IT services ecosystem - it's all digital down here
Posted 22-Nov-2017 21:49


Volvo to supply tens of thousands of autonomous drive compatible cars to Uber
Posted 22-Nov-2017 21:46


From small to medium and beyond: Navigating the ERP battlefield
Posted 21-Nov-2017 21:12


Business owners: ERP software selection starts (and finishes) with you
Posted 21-Nov-2017 21:11


Why I'm not an early adopter
Posted 21-Nov-2017 10:39


Netatmo launches smart home products in New Zealand
Posted 20-Nov-2017 20:06


Huawei Mate 10: Punchy, long battery life, artificial intelligence
Posted 20-Nov-2017 16:30


Propel launch Disney Star Wars Laser Battle Drones
Posted 19-Nov-2017 21:26


UFB killer app: Speed
Posted 17-Nov-2017 17:01


The case for RSS — MacSparky
Posted 13-Nov-2017 14:35


WordPress and Indieweb: Take control of your online presence — 6:30 GridAKL Nov 30
Posted 11-Nov-2017 13:43


Chorus reveals technology upgrade for schools, students
Posted 10-Nov-2017 10:28



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.