Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


1512 posts

Uber Geek
+1 received by user: 38


Topic # 230619 5-Mar-2018 18:17
Send private message

Just curious about this.  Bathroom Methven products generally have 20yr warranties.  if they are installed by a plumber, 20yr is a long time.  What happens to the warranty?  In 20yrs the person might have retired, or do something different or work under another company name.  Can the manufacturer accept your plumber's receipt? 

 

 

 

 

 

Cheers.  


Create new topic
14205 posts

Uber Geek
+1 received by user: 1826


  Reply # 1968375 5-Mar-2018 18:23
Send private message

If you buy from a retailer and supply to the tradesperson, you shouldn't have that issue. the other issue with using tradepeople to buy through, is that they may change their company name, or start trading under a new one, and the warranty maybe with the old one. But under the CGA you can also go to the manufacturer. A 20 year warranty is probably  covered by the manufacturer anyway.


3678 posts

Uber Geek
+1 received by user: 1190


  Reply # 1968446 5-Mar-2018 20:07
Send private message

mattwnz:

 

If you buy from a retailer and supply to the tradesperson, you shouldn't have that issue. the other issue with using tradepeople to buy through, is that they may change their company name, or start trading under a new one, and the warranty maybe with the old one. But under the CGA you can also go to the manufacturer. A 20 year warranty is probably  covered by the manufacturer anyway.

 

 

 

 

Tradespeople don't like people supplying their own parts. 

 

Tradespeople commonly change company every year or two to avoid liability (eg, my roofing company made a mistake and when I asked them to fix it they said no because they closed/reopened the  company and were no longer liable for fixing their own work). 

 

You'd just need to keep receipts and go via the manufacturer. 


6977 posts

Uber Geek
+1 received by user: 3630


  Reply # 1968497 5-Mar-2018 21:06
Send private message

Supposedly the LBP scheme was supposed to sort the fly by nighter out.  The roofing contractor LBP was supposed to be the one facing penalty / license suspension if they did dodgy work, and would be liable for making good.  OTOH not all re-roofing work is restricted work requiring consent, it still needs to meet code but anybody can do it.

 

As far as Methven taps go, I installed those in our house 25 years ago approx, ceramic cartridge type.  I purchased several spare cartridges in case I needed to replace them, and all the spares are still sitting in a box in the basement. 




1512 posts

Uber Geek
+1 received by user: 38


  Reply # 1968505 5-Mar-2018 21:14
Send private message

Fred99:

 

Supposedly the LBP scheme was supposed to sort the fly by nighter out.  The roofing contractor LBP was supposed to be the one facing penalty / license suspension if they did dodgy work, and would be liable for making good.  OTOH not all re-roofing work is restricted work requiring consent, it still needs to meet code but anybody can do it.

 

As far as Methven taps go, I installed those in our house 25 years ago approx, ceramic cartridge type.  I purchased several spare cartridges in case I needed to replace them, and all the spares are still sitting in a box in the basement. 

 

 

 

 

Yes, we installed a new mixer tap recently ourselves.  Was a curious post since many people may ask a tradesperson to do it and some products have very long warranty.  

 

After 25yrs, do the tapware themselves look worn?  

 

We picked up a $100 Methven so not bad.

 

 

 

I think we had a $40 cheap mixer tap that lasted nearly 10yrs.  The cartridge was plastic and no one had them in stock.  Probably not made to be serviced.  


6977 posts

Uber Geek
+1 received by user: 3630


  Reply # 1968530 5-Mar-2018 21:41
Send private message

rayonline:

 

Yes, we installed a new mixer tap recently ourselves.  Was a curious post since many people may ask a tradesperson to do it and some products have very long warranty.  

 

After 25yrs, do the tapware themselves look worn?  

 

We picked up a $100 Methven so not bad.

 

I think we had a $40 cheap mixer tap that lasted nearly 10yrs.  The cartridge was plastic and no one had them in stock.  Probably not made to be serviced.  

 

 

Actually after 25 years the old Methven taps look and work as good as new and have never had any attention at all apart from cleaning.
So there's a plug to go in the sink. :-)


14205 posts

Uber Geek
+1 received by user: 1826


  Reply # 1968581 5-Mar-2018 22:35
Send private message

surfisup1000:

 


Tradespeople don't like people supplying their own parts. 


Tradespeople commonly change company every year or two to avoid liability (eg, my roofing company made a mistake and when I asked them to fix it they said no because they closed/reopened the  company and were no longer liable for fixing their own work). 


You'd just need to keep receipts and go via the manufacturer. 



Find a new trades person then. Never had this problem myself.

4250 posts

Uber Geek
+1 received by user: 68

Moderator
Trusted
Lifetime subscriber

  Reply # 1980046 19-Mar-2018 17:59
Send private message

Not much help in your case, but we moved into our new home recently and the in wall over had a fault. All the manufacturer/authorised repairer needed was the electrical certification from when the sparky installed it. They said they are use to people buying appliances and not installing them for up to a few years, so their warranty starts on the date of install.


1513 posts

Uber Geek
+1 received by user: 212


  Reply # 1980205 19-Mar-2018 23:28
Send private message

I had no idea Methven's warranty was so long. I have all Methven taps, spouts, shower mixer and rose from 2004 with no issues and no maintenance required but we put off buying a kitchen mixer until somewhere around 2011/12 that's been nothing but a pain from the first month. It's been fixed by a plumber a few times and continues to be an ongoing headache with a non functioning temperature indicator (loose and just rolls around under the tap) and a stiff mixer handle. I still have the 2004 receipt (bought them all on the same docket) but not the more recent one so I'm out of luck. Figures. I think I'll replace it with a cheapie, the other one cheapie lasted a good long time.

1443 posts

Uber Geek
+1 received by user: 321

Trusted

  Reply # 1980217 20-Mar-2018 01:26
Send private message

Similar question - bathroom was installed in April last year by a full service bathroom company. Bath has a little crack visible. Bathroom company wanting to pass me on to the bath company (NZ based) who are very much dragging their feet. What's best way forward on this?

141 posts

Master Geek
+1 received by user: 58


  Reply # 1980246 20-Mar-2018 07:45
Send private message

JayADee: I had no idea Methven's warranty was so long. I have all Methven taps, spouts, shower mixer and rose from 2004 with no issues and no maintenance required but we put off buying a kitchen mixer until somewhere around 2011/12 that's been nothing but a pain from the first month. It's been fixed by a plumber a few times and continues to be an ongoing headache with a non functioning temperature indicator (loose and just rolls around under the tap) and a stiff mixer handle. I still have the 2004 receipt (bought them all on the same docket) but not the more recent one so I'm out of luck. Figures. I think I'll replace it with a cheapie, the other one cheapie lasted a good long time.

 

 

 

Methven only introduced their 20 years warranty about 3 years ago.

 

You have to be careful about Methven products nowadays. They used to produce top tier quality products in the old days, expensive but long lasting products. A bit like the F&P of old. However, in the last 5 years or so, their quality have been variable at best. I have a very expensive bathroom tap which needs warranty service twice in the first year due to leaks and an expensive shower replaced under 14 months due to leak. 

 

Methven warranty is good but the product is a bit of a pot luck nowadays. 


575 posts

Ultimate Geek
+1 received by user: 93


  Reply # 1980248 20-Mar-2018 07:52
One person supports this post
Send private message

jonb: Similar question - bathroom was installed in April last year by a full service bathroom company. Bath has a little crack visible. Bathroom company wanting to pass me on to the bath company (NZ based) who are very much dragging their feet. What's best way forward on this?

 

 

 

CGA - get the bathroom company to sort it. Their obligations under the CGA. You shouldn't be managing that process with the manufacturer.


1513 posts

Uber Geek
+1 received by user: 212


  Reply # 1980341 20-Mar-2018 09:20
Send private message

smalltrader:

 

JayADee: I had no idea Methven's warranty was so long. I have all Methven taps, spouts, shower mixer and rose from 2004 with no issues and no maintenance required but we put off buying a kitchen mixer until somewhere around 2011/12 that's been nothing but a pain from the first month. It's been fixed by a plumber a few times and continues to be an ongoing headache with a non functioning temperature indicator (loose and just rolls around under the tap) and a stiff mixer handle. I still have the 2004 receipt (bought them all on the same docket) but not the more recent one so I'm out of luck. Figures. I think I'll replace it with a cheapie, the other one cheapie lasted a good long time.

 

 

 

Methven only introduced their 20 years warranty about 3 years ago.

 

You have to be careful about Methven products nowadays. They used to produce top tier quality products in the old days, expensive but long lasting products. A bit like the F&P of old. However, in the last 5 years or so, their quality have been variable at best. I have a very expensive bathroom tap which needs warranty service twice in the first year due to leaks and an expensive shower replaced under 14 months due to leak. 

 

Methven warranty is good but the product is a bit of a pot luck nowadays. 

 

 

 

 

Yeah the old stuff is still like new. The next kitchen mixer won't likely be Methven.


Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new NUC kits and NUC mini PCs
Posted 16-Aug-2018 11:03


The Warehouse leaps into the AI future with Google
Posted 15-Aug-2018 17:56


Targus set sights on enterprise and consumer growth in New Zealand
Posted 13-Aug-2018 13:47


Huawei to distribute nova 3i in New Zealand
Posted 9-Aug-2018 16:23


Home robot Vector to be available in New Zealand stores
Posted 9-Aug-2018 14:47


Panasonic announces new 2018 OLED TV line up
Posted 7-Aug-2018 16:38


Kordia completes first live 4K TV broadcast
Posted 1-Aug-2018 13:00


Schools get safer and smarter internet with Managed Network Upgrade
Posted 30-Jul-2018 20:01


DNC wants a safer .nz in the coming year
Posted 26-Jul-2018 16:08


Auldhouse becomes an AWS Authorised Training Delivery Partner in New Zealand
Posted 26-Jul-2018 15:55


Rakuten Kobo launches Kobo Clara HD entry level reader
Posted 26-Jul-2018 15:44


Kiwi team reaches semi-finals at the Microsoft Imagine Cup
Posted 26-Jul-2018 15:38


KidsCan App to Help Kiwi Children in Need
Posted 26-Jul-2018 15:32


FUJIFILM announces new high-performance lenses
Posted 24-Jul-2018 14:57


New FUJIFILM XF10 introduces square mode for Instagram sharing
Posted 24-Jul-2018 14:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.