Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1092 posts

Uber Geek

Subscriber

# 257080 13-Sep-2019 18:37
Send private message

Any experience / opinions on the Toolshed Router table

 

https://www.thetoolshed.co.nz/product/593-toolshed-router-table

 

3 year warranty seems to show confidence in the product.

 

Anyone own one/used one ?


Create new topic
334 posts

Ultimate Geek


  # 2317402 13-Sep-2019 20:00
Send private message

Looks identical to one I helped someone assemble (after they had to box it up and send away for a warranty repair). The channel that the mitre gauge slides along didn't line up so you'd slide it through 66% of the way then it would get stuck and not reach the end. Eg the slot in the darker grey 'clipon' bits didn't line up with the lighter grey in the middle.

 

Never actually used it itself.


22896 posts

Uber Geek

Trusted
Subscriber

  # 2317410 13-Sep-2019 20:14
Send private message

I bougght the ozito table only from bunnings, but my router will not fit it so will have to get another router before I can use it. Typical cut down as far as possible construction on it and the tool shed one didnt look much better to me other than coming with the motor. Extension sides were not that well lined up, but that might have been assembly as they were folded metal with slots for nuts and bolts to go onto the middle bit. Same thing happend with my ozito but I was able to get things lined up better.





Richard rich.ms

 
 
 
 


1091 posts

Uber Geek


  # 2317413 13-Sep-2019 20:21
Send private message

richms:

 

I bougght the ozito table only from bunnings, but my router will not fit it so will have to get another router before I can use it. Typical cut down as far as possible construction on it and the tool shed one didnt look much better to me other than coming with the motor.

 

 

Machinery House has their September sale on at the moment. Their cheaper units look similar to the Toolshed model and probably aren't much better, but it might be worth a look.

 

The Ozito unit is rubbish. I have one and it's the worst Ozito tool I own. The fence is basically useless. Fortunately for what I'm doing I don't really need to use it. I just think it's easier to use a table than hand hold the router.




1092 posts

Uber Geek

Subscriber

  # 2317431 13-Sep-2019 21:16
Send private message

SirHumphreyAppleby:

 

richms:

 

I bougght the ozito table only from bunnings, but my router will not fit it so will have to get another router before I can use it. Typical cut down as far as possible construction on it and the tool shed one didnt look much better to me other than coming with the motor.

 

 

Machinery House has their September sale on at the moment. Their cheaper units look similar to the Toolshed model and probably aren't much better, but it might be worth a look.

 

The Ozito unit is rubbish. I have one and it's the worst Ozito tool I own. The fence is basically useless. Fortunately for what I'm doing I don't really need to use it. I just think it's easier to use a table than hand hold the router.

 

 

Yeah the fence on my Ryobi Benchsaw is utter garbage too, I bought it on a whim to do a job. I am happy with my other Ryobi stuff.

 

Can't run Dado blades which is one of the reasons I have wondered if I can use a router table to do the bits and pieces I want for making drawers for the workshop and so on.

 

May have to save some bigger $ and get something better quality.


641 posts

Ultimate Geek


  # 2317761 14-Sep-2019 13:28
Send private message

I looked at these tables and didn't like what I saw, so bought a 1/2" router off them and built my own table.

 

https://www.geekzone.co.nz/forums.asp?forumid=141&topicid=116854&page_no=31#2201971

 

Some of the things I didn't like;

 

Table top too small, maximum 50mm from edge of wood to router bit, flimsy tin and plastic fittings etc.

 

About the only thing I liked was that it had a wheel to raise and lower the bit.

 

You could possibly throw away all the fittings and mount the top into a piece of mdf. Then you would be able to make a decent fence etc.


331 posts

Ultimate Geek


  # 2317798 14-Sep-2019 15:31
Send private message

I talked to someone at Toolshed about this, and they said that although Toolshed sold lots of good own-brand tools, this was not one of them.  They pointed out how out-of-plumb everything was and that apparently it was pretty prone to failure. Said they pretty much normally just warn people away from buying it.

 

Which was all good feedback, so I made my other Toolshed purchases and left the router there :)


neb

1401 posts

Uber Geek

Trusted
Lifetime subscriber

  # 2318326 16-Sep-2019 05:28
Send private message

sir1963:

Any experience / opinions on the Toolshed Router table

 

https://www.thetoolshed.co.nz/product/593-toolshed-router-table

 

3 year warranty seems to show confidence in the product.

 

Anyone own one/used one ?

 

 

So the router is built in? Check what it's like to change bits, some router tables make it almost impossible without removing the entire router just to do a bit change. In particular the one-size-misfits-all tables can be a real pain because the designers don't know what's needed to access the router. Even tables that you'd think should work, like the Ozito table and Ozito router, don't (the Ozito table is a generic one sold under a number of different names, not designed to fit the Ozito router).

 
 
 
 


neb

1401 posts

Uber Geek

Trusted
Lifetime subscriber

  # 2318327 16-Sep-2019 05:34
Send private message

richms:

I bougght the ozito table only from bunnings, but my router will not fit it so will have to get another router before I can use it.

 

 

Ahh, yeah, that's the one I point out in the previous message. Even if it fitted, you might not be able to change bits on it. Some guy did a video review of it where he shows how painful it is to work with... ahh, here it is.

1091 posts

Uber Geek


  # 2318336 16-Sep-2019 07:03
Send private message

neb: Even tables that you'd think should work, like the Ozito table and Ozito router, don't (the Ozito table is a generic one sold under a number of different names, not designed to fit the Ozito router).

 

It's not not too bad if you remove the springs and put the router on with the switch facing the rear. The cable comes out the top of the router, so it hits the surface on which the table is mounted, but it's not a tight bend.

 

I still wouldn't recommend this combination however. I got the table for a specific job and it will come in handy for other things, but it's far from what I expect even from Ozito.


Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Ring launches indoor-only security camera
Posted 23-Jan-2020 17:26


New report findings will help schools implement the digital technologies curriculum content
Posted 23-Jan-2020 17:25


N4L to upgrade & support wireless internet inside schools
Posted 23-Jan-2020 17:22


Netflix releases 21 Studio Ghibli works
Posted 22-Jan-2020 11:42


Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45


Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30


JBL launches headphones range designed for gaming
Posted 13-Jan-2020 09:59


Withings introduces ScanWatch wearable combining ECG and sleep apnea detection
Posted 9-Jan-2020 18:34


NZ Police releases public app
Posted 8-Jan-2020 11:43


Suunto 7 combine sports and smart features on new smartwatch generation
Posted 7-Jan-2020 16:06


Intel brings innovation with technology spanning the cloud, network, edge and PC
Posted 7-Jan-2020 15:54


AMD announces high performance desktop and ultrathin laptop processors
Posted 7-Jan-2020 15:42


AMD unveils four new desktop and mobile GPUs including AMD Radeon RX 5600
Posted 7-Jan-2020 15:32


Consolidation in video streaming market with Spark selling Lightbox to Sky
Posted 19-Dec-2019 09:09


Intel introduces cryogenic control chip to enable quantum computers
Posted 10-Dec-2019 21:32



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.