Geekzone: technology news, blogs, forums
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.

3023 posts

Uber Geek

# 257283 24-Sep-2019 10:50
Send private message

Because geekzone folks are so multi talented I figured this is worth an ask, so here goes....


We are about to commence a redecoration project at home. Whole inside of the house needs a repaint.


The electrical fittings are all Clipsal branded fittings (around 18 years old) and the plastic faceplates (removable) have all yellowed -as some plastic is inclined to do. I gather adding bromide to plastic as a fire retardent is  factor in some plastics going brown.


Anyway - I had a fiddle with some peroxide solution and sunlight and had 'some' success - but they will just discolour again.


A quick tot up shows around 50-60 plastic cover plates. The switches/plug points under the face plates are all still bright white.


Not keen on replacing every power point and light switch in the house so was thinking about options - maybe someone else has worked through this.


Should I lightly sand them down and spray paint them?


What sort of paint - Maybe plasti dip (that looked interesting or would it just peal off too easily).


Because they have quite square edges/corners they would be difficult to cover in vinyl (imagine the shape of half a pack of playing cards if you get my drift).


Just on the off chance someone else has done something like this - any ideas?



Nothing is impossible for the man who doesn't have to do it himself - A. H. Weiler

Create new topic
650 posts

Ultimate Geek

  # 2323787 24-Sep-2019 11:07
Send private message

Look up retrobrite / retr0brite on youtube. DIY concoction to restore yellowed plastic.

3023 posts

Uber Geek

  # 2323822 24-Sep-2019 11:44
Send private message


Look up retrobrite / retr0brite on youtube. DIY concoction to restore yellowed plastic.

That is the hydrogen peroxide solution I referred to. It worked to a degree, but it's not permanent.

Nothing is impossible for the man who doesn't have to do it himself - A. H. Weiler


1028 posts

Uber Geek

  # 2323835 24-Sep-2019 12:03
Send private message

Are the cover plates available by themselves?


From memory PDL plates are worth $1-2, don't know about your brand though.


In an ideal world you would rehabilitate them and save the planet from the plastic waste but many would ask what your time is worth.

4325 posts

Uber Geek

  # 2323848 24-Sep-2019 12:17
Send private message

Yea just go and buy new faceplates. Paint will look horrible.

Clipsal is now Schneider, any good electrical wholesaler stocks them.

1091 posts

Uber Geek

  # 2323871 24-Sep-2019 12:33
Send private message

Given the quantity, I'd buy new plates or replace the switches. Any slight imperfection in the sanding will show through and make the paint job look cheap and nasty. Without sanding you probably won't get the paint to bond very well.


I have powder coated plates before and they come out looking great, but that's not an option for plastic ones.


Vacuum formed plastic wrap could possibly work.

22898 posts

Uber Geek


  # 2323900 24-Sep-2019 12:48
Send private message

I tried painting some once with silver paint because the metal plates cost money. It went horribly wrong. Even when primed over sanded plastic it would come off, just putting the plate on where the switches and sockets came thru would flick parts off around the hole.


If you think clipsal plates go bad, you really should see the brown HPM ones I have now.


350 posts

Ultimate Geek


  # 2323930 24-Sep-2019 13:26
Send private message

We just replaced all the light switches with PDL (half the house was already PDL) with metal covers, its pretty cheap maybe $4 a cover? and the power switches with cheaper Goldair


It is amazing how much of a difference it makes


3023 posts

Uber Geek

  # 2324016 24-Sep-2019 14:26
Send private message

Found an online supplier in NZ that quotes around $4.70 each for cover plates.

I see they mention "silver available" - had been thinking that might look good against a white(grey tint) wall.
Also being metal they shouldn't go yellow.
Assuming the silver (aluminium) is that price +/- then it's around $320 which is probably ok I guess.
Easier than mucking around with spray cans I suppose.
Would have been better if they could have used a stable plastic in the first place though.

Nothing is impossible for the man who doesn't have to do it himself - A. H. Weiler

Create new topic

Twitter and LinkedIn »

Follow us to receive Twitter updates when new discussions are posted in our forums:

Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:

Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:

News »

Ring launches indoor-only security camera
Posted 23-Jan-2020 17:26

New report findings will help schools implement the digital technologies curriculum content
Posted 23-Jan-2020 17:25

N4L to upgrade & support wireless internet inside schools
Posted 23-Jan-2020 17:22

Netflix releases 21 Studio Ghibli works
Posted 22-Jan-2020 11:42

Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45

Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30

JBL launches headphones range designed for gaming
Posted 13-Jan-2020 09:59

Withings introduces ScanWatch wearable combining ECG and sleep apnea detection
Posted 9-Jan-2020 18:34

NZ Police releases public app
Posted 8-Jan-2020 11:43

Suunto 7 combine sports and smart features on new smartwatch generation
Posted 7-Jan-2020 16:06

Intel brings innovation with technology spanning the cloud, network, edge and PC
Posted 7-Jan-2020 15:54

AMD announces high performance desktop and ultrathin laptop processors
Posted 7-Jan-2020 15:42

AMD unveils four new desktop and mobile GPUs including AMD Radeon RX 5600
Posted 7-Jan-2020 15:32

Consolidation in video streaming market with Spark selling Lightbox to Sky
Posted 19-Dec-2019 09:09

Intel introduces cryogenic control chip to enable quantum computers
Posted 10-Dec-2019 21:32

Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.

Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.