Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | ... | 29
602 posts

Ultimate Geek
+1 received by user: 79

Trusted
Lifetime subscriber

  # 1750889 30-Mar-2017 20:33
Send private message

I have some problems.  I believe it is related to duplicated IPv6 address allocated by DHCPv6 (LAN side).

 

So, here is the setting I used for the WAN/Internet section of my router.

 

 

 

 

 

 

And here is the setting on the LAN side of things

 

 

And here is the sequence of events:

 

boot up my ipad, turn wifi on, it got an address of 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1000

 

boot up laptop #1, plug in LAN cable, got an address of 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1001

 

boot up laptop #2, turn on wifi, got an address of 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1002

 

boot up PC, plug in LAN cabel, got an address of 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1003

 

turn off wifi on laptop #2 (currently with 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1002).  then plug in a LAN cable, it got an address of 2403:9800:xxxx:xxxx:yyyy:yyyy:yyyy:1000!!!  Man, this is the IPv6 address the ipad was having.

 

And now, ipad have no IPv6 connectivity.

 

Can anyone help?  Thanks!


98 posts

Master Geek
+1 received by user: 49

Trusted
BigPipe

  # 1750896 30-Mar-2017 20:42
Send private message

Sounds like a bug with the DHCP server on your router. It shouldn't be assigning the same IP address to multiple devices.

 

You could try changing to SLAAC for internal addressing. With SLAAC your router will announce on the LAN the IPv6 prefix of your connection, and each device will assign their own IP based on this.


 
 
 
 


73 posts

Master Geek
+1 received by user: 11


  # 1750905 30-Mar-2017 21:08
Send private message

When will https://www.bigpipe.co.nz/ be IPv6 ? yell


98 posts

Master Geek
+1 received by user: 49

Trusted
BigPipe

  # 1750911 30-Mar-2017 21:22
4 people support this post
Send private message

Can't answer that one sorry. The team responsible for the website are no doubt following this thread though. :)


11 posts

Geek
+1 received by user: 1


  # 1751126 31-Mar-2017 13:01
Send private message

PM Sent :)

 

 

 

Always keen to test out stuff!


11 posts

Geek
+1 received by user: 1


  # 1751242 31-Mar-2017 16:22
Send private message

https://imgur.com/TepZ3uu

 

what should i enter here ^^


5477 posts

Uber Geek
+1 received by user: 1914


  # 1751247 31-Mar-2017 16:26
One person supports this post
Send private message

miztic:

 

https://imgur.com/TepZ3uu

 

what should i enter here ^^

 

 

Image tags or even better upload to GZ so people can see your image.

 


 
 
 
 


98 posts

Master Geek
+1 received by user: 49

Trusted
BigPipe

  # 1751255 31-Mar-2017 16:54
Send private message

You need to set your router to use DHCPv6-PD as the connection type for IPv6. Based on that screenshot it looks like it's configured for a tunnelling service, which won't allow native IPv6 from us.

 

Is there an advanced config area for IPv6 anywhere? If so, use it to set the connection type to DHCPv6-PD. If that isn't listed try automatic, or potentially native. If it doesn't have any of those options, check the Asus website for a firmware update, and apply it if there's one available. After the update check if you've got more connection type options.

 

If there aren't any firmware updates available, or after you update it the available options don't change, try factory resetting it. If after a factory reset you still don't have the correct connection type as an option, it looks like your router doesn't support the connection type we require for IPv6.


11 posts

Geek
+1 received by user: 1


  # 1751267 31-Mar-2017 17:04
Send private message

IPv6pipe:

 

You need to set your router to use DHCPv6-PD as the connection type for IPv6. Based on that screenshot it looks like it's configured for a tunnelling service, which won't allow native IPv6 from us.

 

Is there an advanced config area for IPv6 anywhere? If so, use it to set the connection type to DHCPv6-PD. If that isn't listed try automatic, or potentially native. If it doesn't have any of those options, check the Asus website for a firmware update, and apply it if there's one available. After the update check if you've got more connection type options.

 

If there aren't any firmware updates available, or after you update it the available options don't change, try factory resetting it. If after a factory reset you still don't have the correct connection type as an option, it looks like your router doesn't support the connection type we require for IPv6.

 

 

hey,

 

yeah in the WAN it shows I can select DHCP (or SLAAC), and DHCP PD is Enabled. Also have an option MLD Proxy, and that is set to Disable.

 

I also run all the ip dhcp off windows server 2012 instead of the modem/router - so will setup dhcpv6pd shortly.


98 posts

Master Geek
+1 received by user: 49

Trusted
BigPipe

  # 1751282 31-Mar-2017 17:45
Send private message

Can you take some more screenshots and post them? Anything related to v6 in your router config.

 

Ideally the DHCP server and router will be the same device. I've yet to encounter a consumer grade router that'll allow native v6 connectivity with another device doing the LAN v6 address assignment.


740 posts

Ultimate Geek
+1 received by user: 234

Trusted

  # 1751289 31-Mar-2017 18:14
One person supports this post
Send private message

@runningman - make sure you're running the latest firmware for your router, and then like IPv6pipe said, DHCPv6-PD is the goer - the default SHOULD work seamlessly.


5477 posts

Uber Geek
+1 received by user: 1914


  # 1751326 31-Mar-2017 19:43
2 people support this post
Send private message

toejam316:

 

@runningman - make sure you're running the latest firmware for your router, and then like IPv6pipe said, DHCPv6-PD is the goer - the default SHOULD work seamlessly.

 

 

Ah, I don't have a Bigpipe connection, so don't think it's going to work.... Thanks anyway wink

 

Was just posting @miztic's image so others could see it.


11 posts

Geek
+1 received by user: 1


  # 1751341 31-Mar-2017 20:23
Send private message

IPv6pipe:

 

Can you take some more screenshots and post them? Anything related to v6 in your router config.

 

Ideally the DHCP server and router will be the same device. I've yet to encounter a consumer grade router that'll allow native v6 connectivity with another device doing the LAN v6 address assignment.

 

 

 

 

for some reason it won't let me do the img thing, so here's the link: https://imgur.com/1eiiuyy


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1751344 31-Mar-2017 20:29
Send private message

if you are posting an image it needs to have a valid file extension after it


98 posts

Master Geek
+1 received by user: 49

Trusted
BigPipe

  # 1751345 31-Mar-2017 20:30
Send private message

miztic: for some reason it won't let me do the img thing, so here's the link: https://imgur.com/1eiiuyy

 

 

It might let me, not sure if the overlords have enabled link/image imbedding for this account or not. Let's try:

 

 

 

 

Edit: Yep, it worked. Your screenshot above looks OK. If you set the connection type option on your original screenshot to Disable, and let your router run as the DHCP server, do your client devices obtain an IPv6 address?
If not, try setting the DHCP option to SLAAC. If you still don't get anything, fire up Wireshark and look for Router Advertisements - when your router is set to SLAAC it should be sending out advertisements with your IPv6 prefix.


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | ... | 29
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Dunedin selects Telensa to deliver smart street lighting for 15,000 LEDs
Posted 18-Jul-2019 10:21


Sprint announces a connected wallet card with built-in IoT support
Posted 18-Jul-2019 08:36


Educational tool developed at Otago makes international launch
Posted 17-Jul-2019 21:57


Symantec introduces cloud access security solution
Posted 17-Jul-2019 21:48


New Zealand government unveils new digital service to make business easier
Posted 16-Jul-2019 17:35


Scientists unveil image of quantum entanglement
Posted 13-Jul-2019 06:00


Hackers to be challenged at University of Waikato
Posted 12-Jul-2019 21:34


OPPO Reno Z now available in New Zealand
Posted 12-Jul-2019 21:28


Sony introduces WF-1000XM3 wireless headphones with noise cancellation
Posted 8-Jul-2019 16:56


Xero announces new smarter tools, push into the North American market
Posted 19-Jun-2019 17:20


New report by Unisys shows New Zealanders want action by social platform companies and police to monitor social media sites
Posted 19-Jun-2019 17:09


ASB adds Google Pay option to contactless payments
Posted 19-Jun-2019 17:05


New Zealand PC Market declines on the back of high channel inventory, IDC reports
Posted 18-Jun-2019 17:35


Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.