Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




667 posts

Ultimate Geek


# 214328 7-May-2017 10:39
Send private message

Hi all,

 

 

 

After swapping out the stereo in a 2007 Camry I have noticed that the car is idling at a very low RPM at intersections/lights etc. Any ideas what might be causing this?

 

I did my research online and found many references to swaping out the stereo to be a fairly straightforward process and nobody reporting any problems. To simplify the process I used off the shelf parts and no soldering etc (Metra 99-8218 Dash Kit + Sony XAV-V631BT + Aeropro wiring harnesses), thus far everything works as expected (radio, AC, steering wheel controls). The only drama is the low idle, to the extent it sits at about 500rpm and feels like its going to stall.

 

My initial thoughts are it might be something to do with the Shift Lock button, as to install the radio I had to remove the center console and plastic around the gear lever. I'll remove these parts today but am not certain its the problem as the car didn't appear to have any problem changing gears driving around town etc.

 

Any ideas?

 

Thanks


Filter this topic showing only the reply marked as answer Create new topic
3344 posts

Uber Geek

Trusted
Vocus

  # 1777130 7-May-2017 12:12
Send private message

It's most likely unrelated IMO


656 posts

Ultimate Geek


  # 1777131 7-May-2017 12:20
One person supports this post
Send private message

I'm guessing that you looked on YouTube on how to 'How to replace a car stereo', and a lot of the time they [YouTubers] suggest to disconnect the battery as part of the best practices. However this can cause the ECU (Engine Control Unit) to wipe its auto configuration for air and flue mix. The car's ECU auto configure it air and flue mix over time and consultancy calibrating it's fuel mix. I had very similar problem and I found the solution was to let the car idle for 30 minutes not letting the RPM to drop to much before staling. Overtime you will find that the car will sorts it self out.

 

 

 

Check this out:

 

https://www.youtube.com/watch?v=7q24rR401RA






 
 
 
 


1014 posts

Uber Geek
Inactive user


  # 1777140 7-May-2017 13:07
Send private message

Presumably you disconnected the battery when you replaced the stereo. If so the ECU has to relearn the settings for the ISCV (idle speed control valve or 'stepper' motor depending on which system is employed on that particular vehicle). It's best if when the battery is reconnected after such a situation you immediately take them for a small drive of stop-start driving and cycle the various loads like A/C and headlights so it can do so. Until it re-learns the particular settings for different situations it'll just be running baseline which usually results in low idle and sometimes even stalling when coming back to idle.




667 posts

Ultimate Geek


  # 1777166 7-May-2017 14:48
One person supports this post
Send private message

jimbob79:

 

I'm guessing that you looked on YouTube on how to 'How to replace a car stereo', and a lot of the time they [YouTubers] suggest to disconnect the battery as part of the best practices. However this can cause the ECU (Engine Control Unit) to wipe its auto configuration for air and flue mix. The car's ECU auto configure it air and flue mix over time and consultancy calibrating it's fuel mix. I had very similar problem and I found the solution was to let the car idle for 30 minutes not letting the RPM to drop to much before staling. Overtime you will find that the car will sorts it self out.

 

 

 

Check this out:

 

https://www.youtube.com/watch?v=7q24rR401RA

 

 

Thanks! This did the trick, took it for a drive this afternoon and now its back to normal.


Filter this topic showing only the reply marked as answer Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel expands 10th Gen Intel Core Mobile processor family
Posted 23-Aug-2019 10:22


Digital innovation drives new investment provider
Posted 23-Aug-2019 08:29


Catalyst Cloud becomes a Kubernetes Certified Service Provider (KCSP)
Posted 23-Aug-2019 08:21


New AI legaltech product launched in New Zealand
Posted 21-Aug-2019 17:01


Yubico launches first Lightning-compatible security key, the YubiKey 5Ci
Posted 21-Aug-2019 16:46


Disney+ streaming service confirmed launch in New Zealand
Posted 20-Aug-2019 09:29


Industry plan could create a billion dollar interactive games sector
Posted 19-Aug-2019 20:41


Personal cyber insurance a New Zealand first
Posted 19-Aug-2019 20:26


University of Waikato launches space for esports
Posted 19-Aug-2019 20:20


D-Link ANZ expands mydlink ecosystem with new mydlink Mini Wi-Fi Smart Plug
Posted 19-Aug-2019 20:14


Kiwi workers still falling victim to old cyber tricks
Posted 12-Aug-2019 20:47


Lightning Lab GovTech launches 2019 programme
Posted 12-Aug-2019 20:41


Epson launches portable laser projector
Posted 12-Aug-2019 20:27


Huawei launches new distributed HarmonyOS
Posted 12-Aug-2019 20:20


Lenovo introduces single-socket servers for edge and data-intensive workloads
Posted 9-Aug-2019 21:26



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.