Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


2076 posts

Uber Geek
+1 received by user: 357

Trusted
Subscriber

Topic # 151794 5-Sep-2014 12:00
Send private message

I have been using an HDMI splitter for some time now - no name brand from the interwebs - its always been a little bit of a mission to get set-up when ever I install a new device (source or display) but once set-up it works flawlessly.

The problem is I have just had my projector returned after having its main board replaced by the manufacturer and cant seem to get the switcher going again.

I started with everything powered off, switched on the display, switched on my receiver, switched on my Apple TV (feeds through receiver) - picture displays on screen. Next I changed inputs on my receiver to my HTPC and the booted the HTPC - HTPC picture displays on screen.

Here is where it gets interesting - if I swap inputs back to the Apple TV, no display, going back to HTPC is the same, no display. 

Its like its setting everything up and handshaking but then losing it all when I change inputs. 

Anyone got any ideas on what to try next?

If I have to I can use my receiver as a splitter as it has two HDMI outs but the issue with that is it passes both displays to the input device so when I change display the HTPC has to go through the whole new monitor detection routine which results in the screen flashing a couple of times and being unusable for a minute or two. The standalone splitter just keeps the first display used in memory and uses that so the HTPC never sees a change.




When you live your life on Twitter and Facebook, and are only friends with like minded people on Twitter and Facebook, you are not living in the real world. You are living in a narcissistic echo chamber.

 


My thoughts are my own and are in no way representative of my employer.


Create new topic
340 posts

Ultimate Geek
+1 received by user: 72

Subscriber

  Reply # 1122506 5-Sep-2014 12:41
Send private message

Isn't the arrangement you are describing an HDMI splitter, rather than a switch?




McLean



2076 posts

Uber Geek
+1 received by user: 357

Trusted
Subscriber

  Reply # 1122513 5-Sep-2014 13:00
Send private message

mclean: Isn't the arrangement you are describing an HDMI splitter, rather than a switch?


Whoops, correct. Have updated post.




When you live your life on Twitter and Facebook, and are only friends with like minded people on Twitter and Facebook, you are not living in the real world. You are living in a narcissistic echo chamber.

 


My thoughts are my own and are in no way representative of my employer.


340 posts

Ultimate Geek
+1 received by user: 72

Subscriber

  Reply # 1122566 5-Sep-2014 14:16
Send private message

If it's an HDCP re-authentication issue there's a good troubleshooting guide here...

www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php




McLean

BTR

1469 posts

Uber Geek
+1 received by user: 431


  Reply # 1122568 5-Sep-2014 14:19
Send private message

Id say it will be your cheap splitter. Try buying or borrowing another splitter and see if you have the same issue.


I have had many issues with cheap HDMI equipment as they generally don't like the signal being interrupted, quite often with cheap equipment you end up losing signal or having a green/blue tint in the image.


I have seen the issue you describe with someone using a cheap HDMI matrix.

1245 posts

Uber Geek
+1 received by user: 137


  Reply # 1122583 5-Sep-2014 14:46
Send private message

I had so many issues with splitters and got a HDMI + optical switch with remote. Works perfectly with the universal remote



2076 posts

Uber Geek
+1 received by user: 357

Trusted
Subscriber

  Reply # 1122587 5-Sep-2014 14:57
Send private message

BTR: Id say it will be your cheap splitter. Try buying or borrowing another splitter and see if you have the same issue.


I have had many issues with cheap HDMI equipment as they generally don't like the signal being interrupted, quite often with cheap equipment you end up losing signal or having a green/blue tint in the image.


I have seen the issue you describe with someone using a cheap HDMI matrix.


I would usually agree but I have had it for 5 years and its been through a number of different sources/receivers and display devices with no issue until now.




When you live your life on Twitter and Facebook, and are only friends with like minded people on Twitter and Facebook, you are not living in the real world. You are living in a narcissistic echo chamber.

 


My thoughts are my own and are in no way representative of my employer.




2076 posts

Uber Geek
+1 received by user: 357

Trusted
Subscriber

  Reply # 1122589 5-Sep-2014 14:58
Send private message

mclean: If it's an HDCP re-authentication issue there's a good troubleshooting guide here...

www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php


Thanks, I'll have a look through and see if there is something I've missed.




When you live your life on Twitter and Facebook, and are only friends with like minded people on Twitter and Facebook, you are not living in the real world. You are living in a narcissistic echo chamber.

 


My thoughts are my own and are in no way representative of my employer.




2076 posts

Uber Geek
+1 received by user: 357

Trusted
Subscriber

  Reply # 1122940 6-Sep-2014 09:34
Send private message

sorted. the key was to switch my receiver off at the wall before plugging the cables in. so the steps were as per the link provided by mclean (in case anyone else has this issue).

 

Power-off all equipment (At the wall socket).
2. Ensure all Cables, Splitters, Switches, Extenders are connected within the HDMI Distribution Network.
3. Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4. Power on all displays and set to HDMI input from HDMI Distribution Network (Source device need to be able to contact display to retrieve EDID information)
5. Power on Sources / Players. Ensure that a path is open from source to display for HDCP handshake negotiation by selecting the proper input on HDMI Switches or HDMI switch/splitter combo's via the remote control (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Some displays will negotiate HDCP handshake / timing better if the source are already powered on and you may need to change points 3,4,5 above to 4,3,5 or 4,5,3 depending on your equipment.




When you live your life on Twitter and Facebook, and are only friends with like minded people on Twitter and Facebook, you are not living in the real world. You are living in a narcissistic echo chamber.

 


My thoughts are my own and are in no way representative of my employer.


Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new NUC kits and NUC mini PCs
Posted 16-Aug-2018 11:03


The Warehouse leaps into the AI future with Google
Posted 15-Aug-2018 17:56


Targus set sights on enterprise and consumer growth in New Zealand
Posted 13-Aug-2018 13:47


Huawei to distribute nova 3i in New Zealand
Posted 9-Aug-2018 16:23


Home robot Vector to be available in New Zealand stores
Posted 9-Aug-2018 14:47


Panasonic announces new 2018 OLED TV line up
Posted 7-Aug-2018 16:38


Kordia completes first live 4K TV broadcast
Posted 1-Aug-2018 13:00


Schools get safer and smarter internet with Managed Network Upgrade
Posted 30-Jul-2018 20:01


DNC wants a safer .nz in the coming year
Posted 26-Jul-2018 16:08


Auldhouse becomes an AWS Authorised Training Delivery Partner in New Zealand
Posted 26-Jul-2018 15:55


Rakuten Kobo launches Kobo Clara HD entry level reader
Posted 26-Jul-2018 15:44


Kiwi team reaches semi-finals at the Microsoft Imagine Cup
Posted 26-Jul-2018 15:38


KidsCan App to Help Kiwi Children in Need
Posted 26-Jul-2018 15:32


FUJIFILM announces new high-performance lenses
Posted 24-Jul-2018 14:57


New FUJIFILM XF10 introduces square mode for Instagram sharing
Posted 24-Jul-2018 14:44



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.