Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

# 209032 9-Mar-2017 19:50
Send private message

I've been using one of these to eliminate standby power on my AV system for a few years. Basically you configure it to turn off when the current draw indicates everything's on standby. It listens for an IR command to wake up, which works well with the harmony remote. Unfortunately it's stopped working, and so far I haven't managed to get it working right.

 

Can anyone recommend another option? This page recommends a few but it's old. We have one of the manual switches but it's annoying and we forget. This remote control socket looks good, and comes with a remote, so the Harmony should be able to control it. Anyone used that one?

 

Any other recommendations? The AV system (TV, receiver, sub, PS3, R.Pi2) uses over $100 of power a year when it's turned off, so it's worth doing.


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
236 posts

Master Geek
+1 received by user: 67


  # 1733969 9-Mar-2017 20:49
Send private message

Standby power isn't a great problem for modern consumer devices. Most tend to use 0.1 watts or less. My Samsung TV is rated at 0.05 watts. About 20c a year I think I worked out a while back. Some products like washing machines tend to still use a bit eg 5 to 10 watts.

The standby elminator device will also use power, of course.



14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1733970 9-Mar-2017 21:00
Send private message

Lastman: Standby power isn't a great problem for modern consumer devices. Most tend to use 0.1 watts or less. My Samsung TV is rated at 0.05 watts. About 20c a year I think I worked out a while back. Some products like washing machines tend to still use a bit eg 5 to 10 watts.

The standby elminator device will also use power, of course.

 

As per my post, my AV setup uses over 100W of power a year when turned off. I measured the standby power draw. With Flick it will be a little less, but still probably $70/year.


 
 
 
 


236 posts

Master Geek
+1 received by user: 67


  # 1734156 10-Mar-2017 06:36
Send private message

timmmay:

Lastman: Standby power isn't a great problem for modern consumer devices. Most tend to use 0.1 watts or less. My Samsung TV is rated at 0.05 watts. About 20c a year I think I worked out a while back. Some products like washing machines tend to still use a bit eg 5 to 10 watts.

The standby elminator device will also use power, of course.


As per my post, my AV setup uses over 100W of power a year when turned off. I measured the standby power draw. With Flick it will be a little less, but still probably $70/year.



Sorry, missed that. There must be a TV or receiver from the 90s in there. Most modern receivers are fine. Hi-fi amplifiers can be a different story.

I'm just wondering if your power calculations are correct. The Flick at $70 sounds incredibly high.

810 posts

Ultimate Geek
+1 received by user: 191
Inactive user


  # 1734160 10-Mar-2017 06:55
Send private message

timmmay: ... This remote control socket looks good, and comes with a remote, so the Harmony should be able to control it.


Looks about the same as this but costs a lot more. Costs nearly as much as Jaycars pack with three sockets. (I haven't tried them).



14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734163 10-Mar-2017 07:08
Send private message

Lastman:
Sorry, missed that. There must be a TV or receiver from the 90s in there. Most modern receivers are fine. Hi-fi amplifiers can be a different story.

I'm just wondering if your power calculations are correct. The Flick at $70 sounds incredibly high.

 

It's a 55" Samsung LCD TV that's probably 5-6 years old now, Onkyo receiver, PS3, and sub. I also have three PC fans built into my AV centre to cool the receiver and PS3, otherwise they both get pretty hot. Right now they just run of small PSU plugged into the device that turns everything off, but I did build a little device with a solid state relay that turns the power to those off when the TV's USB turns off. It doesn't have to be a huge draw to add up over time.

 

I'll measure the power use while off again this evening if I remember. I might try to work out which device is the main culprit. The sub is probably a leading candidate, it has auto power off but once it does that it doesn't auto power back on well.

 

Sky boxes and similar, which we don't have, use a lot of power when turned off.




14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734164 10-Mar-2017 07:18
Send private message

PaulBags:
timmmay: ... This remote control socket looks good, and comes with a remote, so the Harmony should be able to control it.


Looks about the same as this but costs a lot more. Costs nearly as much as Jaycars pack with three sockets. (I haven't tried them).

 

The three outlet version is about twice as much. Not bad value actually, and I trust jarcar more than a random website, thanks :)

 

This one is much cheaper, $9 each, but out of stock unfortunately.


22165 posts

Uber Geek
+1 received by user: 4731

Trusted
Subscriber

  # 1734178 10-Mar-2017 07:57
Send private message

PB have this one, It drops in price considerably when I log in, so you should be able to bargin them down in store.





Richard rich.ms

 
 
 
 




14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734192 10-Mar-2017 08:35
Send private message

richms:

 

PB have this one, It drops in price considerably when I log in, so you should be able to bargin them down in store.

 

 

I see ascent has it for $28 shipped. I do prefer branded products.

 

Documentation seems poor, I can't find it on the Belkin website to work stuff out.

 

  • Any idea why the ethernet is plugged into it?
  • Why would it wait an hour to switch off after the TV is turned off? My current one takes 1 minute.

 

 

The remote control one from PB seems simpler.


8557 posts

Uber Geek
+1 received by user: 2935

Lifetime subscriber

  # 1734197 10-Mar-2017 08:52
Send private message

the ethernet is for the IR sensor as shown in the video on PBtechs site.

 

the time thing is probably so its not constantly switching the loads on and off.




14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734199 10-Mar-2017 08:57
Send private message

Ah ok, I didn't notice that in the video, thanks. I prefer immediate off because it's just sitting there taking power, making a noise with the fans, and I can turn it on easily.


Fat bottom Trump
10042 posts

Uber Geek
+1 received by user: 4901

Subscriber

  # 1734213 10-Mar-2017 09:18
Send private message

For years we have simply switched off everything at the wall when retiring for the night. We must have two dozen different devices all feeding from the same circuit. Don't know what the total power draw in standby is since we don't use standby, just cut the power. It has always worked fine except for the stupid DVR which loses its clock setting VHS-style but that hasn't been an issue for quite awhile. Reason for doing it this way is safety as well as power saving.

 

 





I reject your reality and substitute my own. - Adam Savage
 




14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734216 10-Mar-2017 09:21
Send private message

Rikkitic:

 

For years we have simply switched off everything at the wall when retiring for the night. We must have two dozen different devices all feeding from the same circuit. Don't know what the total power draw in standby is since we don't use standby, just cut the power. It has always worked fine except for the stupid DVR which loses its clock setting VHS-style but that hasn't been an issue for quite awhile. Reason for doing it this way is safety as well as power saving.

 

 

Our plug is behind the AV unit down at ground level, it's quite awkward to get to. Currently using an Ecoswitch, which is cheap and much easier, but I prefer the ease of having my Harmony remote turn every on and off.


1950 posts

Uber Geek
+1 received by user: 131


  # 1734224 10-Mar-2017 09:35
Send private message

timmmay:

 

As per my post, my AV setup uses over 100W of power a year when turned off. I measured the standby power draw. With Flick it will be a little less, but still probably $70/year.

 

 

I think your maths is a bit off. 100w is only 1/10 of one unit (1 unit = 1kw) and my power here in Auckland is only 17c per unit. If you used $100/yr that equates to around 1.3kw/day (@ 20c/unit). No way would standby use that much power.


22165 posts

Uber Geek
+1 received by user: 4731

Trusted
Subscriber

  # 1734233 10-Mar-2017 09:46
Send private message

100w is 0.1kw, so over a day, 2.4kwh. So 2.4 * 365 * 0.20 = $175.2 per year.





Richard rich.ms



14792 posts

Uber Geek
+1 received by user: 2753

Trusted
Subscriber

  # 1734236 10-Mar-2017 09:49
Send private message

I measured it a few years ago when I put the first devices in. I'll measure again this weekend to check it's worth bothering with.


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Xero announces new smarter tools, push into the North American market
Posted 19-Jun-2019 17:20


New report by Unisys shows New Zealanders want action by social platform companies and police to monitor social media sites
Posted 19-Jun-2019 17:09


ASB adds Google Pay option to contactless payments
Posted 19-Jun-2019 17:05


New Zealand PC Market declines on the back of high channel inventory, IDC reports
Posted 18-Jun-2019 17:35


Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18


E-scooter share scheme launches in Wellington
Posted 17-Jun-2019 12:34


Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.