Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | ... | 88
8 posts

Wannabe Geek


  Reply # 869907 1-Aug-2013 13:06
Send private message

Where does it show the DLM profile ???


______ Technicolor TG589vn v2
___/_____/\
/ /\\ 10.2.5.5
_____/__ / \\
_/ /\_____/___ \ Copyright (c) 1999-2013, Technicolor
// / \ /\ \
_______//_______/ \ / _\/______
/ / \ \ / / / /\
__/ / \ \ / / / / _\__
/ / / \_______\/ / / / / /\
/_/______/___________________/ /________/ /___/ \
\ \ \ ___________ \ \ \ \ \ /
\_\ \ / /\ \ \ \ \___\/
\ \/ / \ \ \ \ /
\_____/ / \ \ \________\/
/__________/ \ \ /
\ _____ \ /_____\/
\ / /\ \ /___\/
/____/ \ \ /
\ \ /___\/
\____\/

------------------------------------------------------------------------
{Administrator}=>xdsl info expand=enabled
Physical Layer Statistics:

Modem state: up
Up time (Days hh:mm:ss): 0 days, 2:20:47
xDSL Standard: ITU-T G.993.2
Channel Mode: Interleaved

Number of reset: 0

Chipset Vendor info (G.994.1): Local Remote
Country code: B500 B500
ID: BDCM IKNS
Specific: 0000 0001

System Vendor info (showtime): Local Remote
Country code: 0F00 0000
ID: TMMB ----
Specific: 3C61 0000

Bearers generic info DS US
Payload rate [Kbps]: 67368 10352
Attenuation [dB]: 2.3 6.0
Margins [dB]: 12.3 30.6
Output power [dBm]: 10.6 -2.3

Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 1.00 1.00
Delay [ms]: 8.00 8.00
Depth []: 285 0.00
R: 16 0

G.997.1 Statistics (Current):

Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0

Performance monitoring:
Line PM: Near end
Error second (ES): 0

Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 28 0

ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A

G.997.1 Statistics (last 15 minutes):

Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0

Performance monitoring:
Line PM: Near end
Error second (ES): 0

Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 28 0

ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A

G.997.1 Statistics (last 24 hours):

Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0

Performance monitoring:
Line PM: Near end
Error second (ES): 0

Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 28 0

ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A

{Administrator}=>

2527 posts

Uber Geek
+1 received by user: 939

Subscriber

  Reply # 869912 1-Aug-2013 13:13
One person supports this post
Send private message

helterskelter07: 
Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 1.00 1.00
Delay [ms]: 8.00 8.00
Depth []: 285 0.00
R: 16 0


I believe that is DLM-4.




Windows 7 x64 // i5-3570K // 16GB DDR3-1600 // GTX660Ti 2GB // Samsung 830 120GB SSD // OCZ Agility4 120GB SSD // Samsung U28D590D @ 3840x2160 & Asus PB278Q @ 2560x1440
Samsung Galaxy S5 SM-G900I w/Spark

 
 
 
 


446 posts

Ultimate Geek
+1 received by user: 94

Subscriber

  Reply # 869913 1-Aug-2013 13:16
2 people support this post
Send private message

helterskelter07: Where does it show the DLM profile ???

Bearers generic info DS US
Payload rate [Kbps]: 67368 10352
Attenuation [dB]: 2.3 6.0
Margins [dB]: 12.3 30.6
Output power [dBm]: 10.6 -2.3

Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 1.00 1.00
Delay [ms]: 8.00 8.00
Depth []: 285 0.00
R: 16 0



Reading any of the last few pages would have answered your question.

DLM-1     1ms  0INP
DLM-2     8ms  0INP
DLM-4     8ms  1INP
DLM-6     8ms  2INP
DLM-3   16ms  0INP
DLM-5   16ms  1INP
DLM-7   16ms  2INP
DLM-8   16ms  4INP

Looks like you are on DLM-4.




Speedtest

8 posts

Wannabe Geek


  Reply # 869916 1-Aug-2013 13:20
Send private message

Great, thank you for that
lots of really good information on here

173 posts

Master Geek
+1 received by user: 36

Lifetime subscriber

  Reply # 869993 1-Aug-2013 14:28
Send private message

Although I have read all the information on this and other threads I am not sure what the information below from my modem equates to for my DLM profile.

Firstly there are 2 different numbers for both INP (1.00 & 1.50) and Delay (12.00 and 15.00) - which number do you use? the first or second?

Then neither the numbers for delay match those listed agains the profiles.

My vdsl has been running for 10 days now with no problems and I am getting 25 down and 9 up which I am happy with.


Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 1.00 1.50
Delay [ms]: 12.00 15.00
Depth []: 173 0.00
R: 12 0

306 posts

Ultimate Geek
+1 received by user: 8


  Reply # 870007 1-Aug-2013 14:37
Send private message

So its been 10 days since I have had vdsl up and running.

Line stats are below. Do they look okay ?
The output power (up) looks abit weird..

Link Information

Uptime: 10 days, 10:23:49

DSL Type: ITU-T G.993.2

Bandwidth (Up/Down) [kbps/kbps]: 10,352 / 49,379

Data Transferred (Sent/Received) [B/B]: 0 / 0

Output Power (Up/Down) [dBm]: 429496717.2 / 13.5

Line Attenuation (Up/Down) [dB]: 14.3 / 6.3

SN Margin (Up/Down) [dB]: 20.3 / 12.3

System Vendor ID (Local/Remote): TMMB / ----

Chipset Vendor ID (Local/Remote): BDCM / IKNS

Loss of Framing (Local/Remote): 10 / 0

Loss of Signal (Local/Remote): 10 / 0

Loss of Power (Local/Remote): 0 / 0

Loss of Link (Remote): -

Error Seconds (Local/Remote): 434 / 0

FEC Errors (Up/Down): 19,037 / 102,470

CRC Errors (Up/Down): 32 / 1,401

HEC Errors (Up/Down): 0 / 4,801




iMac 27 2014
Macbook Pro Retina 2013
iPhone 6s
iPad Air 2

VDSL Sync @ 69Mbps Down / 29Mbps Up


446 posts

Ultimate Geek
+1 received by user: 94

Subscriber

  Reply # 870033 1-Aug-2013 15:11
Send private message

Just had mine installed now, the tech was here for literally 5 minutes (I told him as he walked through the door this would be the easiest install all day).

Uptime:0 days, 0:02:06
DSL Type:ITU-T G.993.2
Bandwidth (Up/Down) [kbps/kbps]:10,354 / 42,855
Data Transferred (Sent/Received) [B/B]:0 / 0
Output Power (Up/Down) [dBm]:429496717.3 / 13.5
Line Attenuation (Up/Down) [dB]:14.6 / 6.9
SN Margin (Up/Down) [dB]:12.8 / 12.4

Number of bearers:                           1   
Bearer 0                                     DS             US     
INP [DMT symbols]:                    2.00           2.00     
Delay [ms]:                                8.00           8.00     
Depth []:                                   387            0.00     
R:                                             16             0

Starting on DLM-6 and pretty happy with these stats, many thanks to the Chorus guy (I've already forgotten his name) and super helpful Telecom reps.




Speedtest

2 posts

Wannabe Geek


  Reply # 870171 1-Aug-2013 18:05
Send private message

Wheelbarrow01:
keeza: Don't know whether others are experiencing this as well but I have been bumped down the waiting list 3 times. I called and got told VDSL would be connected 31 July, then I get a text yesterday saying it will be connected 1 Aug and now I get a text saying 2 Aug. I call up Telecom and they say it could change again. Tell them I'm not happy and explain circumstances but I got snapped at. Not cool. Anyone going through this kind of stuff? How long did it take you to get connected? Pretty frustrating since I'm currently in Auckland and need to travel down to Wellington to make sure I am there in time for the VDSL tech but keep getting told different dates. I travel a lot for work so this is driving me a bit nuts.

Anyone with other VDSL providers or can give me feedback on them? 

Thanks :)


Hi Keeza,

I can advise you that delays to connections in the Wellington area are being caused by the recent earthquakes. All the exchange buildings were locked down by Chorus pending an inspection of their structural integrity. For their own safety, the technicians have been unable to access the exchanges until they are deemed safe, and this has taken time to complete.

This has had a knock on effect as a lot of orders have had to be rescheduled (eg - orders due 22/07 going ahead 24/07, therefore orders originally scheduled 24/07 pushed out to 26/07 etc). This has affected any order where the technician has required access to the Wgtn exchanges.

I know that is frustrating but it was unforeseeable and out of Chorus' control. This will have affected orders with all service providers.

If you PM me your details I can look into your individual case.

Thanks,
Simon


SIMON! You're an absolute MAGICIAN. Thank you so much. My VDSL and phone line got set up today. Granted the chorus guy was a bit grumpy and went on a long, angry rant before he even came into the house because he had been "overbooked" but I offered him tea and biscuits and he softened up straight away. Just a tip for any of you still waiting to get VDSL connected!

He left saying I had the fastest connection he had done in the last 3 weeks in this area and that it was all karma because I was so nice hahaha.

QUICK STATS: 

Uptime: 0 days, 1:13:29

DSL Type: ITU-T G.993.2

Bandwidth (Up/Down) [kbps/kbps]: 10,354 / 47,464

Data Transferred (Sent/Received) [B/B]: 0 / 0

Output Power (Up/Down) [dBm]: 429496712.1 / 13.5

Line Attenuation (Up/Down) [dB]: 9.4 / 4.6

SN Margin (Up/Down) [dB]: 17.7 / 12.8

System Vendor ID (Local/Remote): TMMB / ----

Chipset Vendor ID (Local/Remote): BDCM / IKNS

Loss of Framing (Local/Remote): 0 / 0

Loss of Signal (Local/Remote): 0 / 0

Loss of Power (Local/Remote): 0 / 0

Loss of Link (Remote): -

Error Seconds (Local/Remote): 1 / 0

FEC Errors (Up/Down): 985 / 1,601

CRC Errors (Up/Down): 5 / 3

HEC Errors (Up/Down): 0 / 2 

2784 posts

Uber Geek
+1 received by user: 121


  Reply # 870199 1-Aug-2013 18:42
One person supports this post
Send private message

Inphinity:
helterskelter07:

Any ideas on why power is so high on the UP ?

Data Transferred (Sent/Received) [B/B]: 0 / 0

Output Power (Up/Down) [dBm]: 429496727.3 / 10.6

Line Attenuation (Up/Down) [dB]: 6.1 / 2.3

SN Margin (Up/Down) [dB]: 30.3 / 12.6


Mine was like that for a few days during the DLM training period, but it settled down afterward. No idea why.



It's a bug in the Technicolor firmware, it can't handle displaying a negative value which you'll see accurately if you have a look at the same values via the telnet interface.

Info on mine:

Web interface:
Output Power (Up/Down) [dBm]:429496721.5 / 13.5

Telnet Interface (Down/Up):
    Output power [dBm]:   13.5           -8.1  


My DLM has dropped from 6 to 3 and my downstream went from 39Mbps to 43Mbps, so will be interesting to see if it ever hits DLM1.





8 posts

Wannabe Geek


  Reply # 870211 1-Aug-2013 18:57
Send private message

Thanks Stevenz this has been bugging me

Output power [dBm]: 10.6 -2.3 (from the telnet console)

Output Power (Up/Down) [dBm]: 429496727.3 / 10.6 (from the technicolor router)

48 posts

Geek
+1 received by user: 2


  Reply # 870272 1-Aug-2013 19:49
Send private message

VDSL install today. A very busy Chorus guy (well there were two of them) arrived and just needed to plug in the new modem. Although he had to go back and fix the phone line once.

Asked if it was possible to move my existing master filter (this was put in years ago when ADSL installs were done by Telecom engineers) but no joy, he was too busy. Told me to ring and book another job.

My ADSL speed test before:



And my now VDSL speed test after 6 hours: (Pretty happy with these!)



Stats from the modem:

Uptime: 0 days, 4:33:50

DSL Type: ITU-T G.993.2

Bandwidth (Up/Down) [kbps/kbps]: 10,347 / 44,860

Data Transferred (Sent/Received) [B/B]: 0 / 0

Output Power (Up/Down) [dBm]: 429496717.8 / 13.5

Line Attenuation (Up/Down) [dB]: 15.2 / 7.5

SN Margin (Up/Down) [dB]: 19.4 / 12.4

System Vendor ID (Local/Remote): TMMB / ----

Chipset Vendor ID (Local/Remote): BDCM / IKNS

Loss of Framing (Local/Remote): 7 / 0

Loss of Signal (Local/Remote): 10 / 0

Loss of Power (Local/Remote): 0 / 0

Loss of Link (Remote): -

Error Seconds (Local/Remote): 11 / 0

FEC Errors (Up/Down): 15 / 469

CRC Errors (Up/Down): 0 / 0

HEC Errors (Up/Down): 0 / 0



202 posts

Master Geek
+1 received by user: 23


  Reply # 870354 1-Aug-2013 21:46
Send private message

helterskelter07: Thanks Stevenz this has been bugging me

Output power [dBm]: 10.6 -2.3 (from the telnet console)

Output Power (Up/Down) [dBm]: 429496727.3 / 10.6 (from the technicolor router)


I'm sure that's a bug of router software. And it's not major bug. :) 




Sorry about my English guys :>

282 posts

Ultimate Geek
+1 received by user: 27


  Reply # 870806 2-Aug-2013 15:45
Send private message

Bearers generic info DS US
Payload rate [Kbps]: 47805 10341

Been on VDSL for about 2 days and great speed so far :D

Just inregards to the modem, I would like to DMZ my home server, and it has a static IP set on it and the VDSL modem will only let me do it for a DHCP assigned pc :( is there any way around this? even via telnet?

Must admit theres been heaps of info on this topic, and you Telecom guys are being awesome, I think I knew everything about this setup before we even arranged the install ;)




If you have to run heating in winter, you don’t own enough computers.


2527 posts

Uber Geek
+1 received by user: 939

Subscriber

  Reply # 870823 2-Aug-2013 15:56
Send private message

funnyfela: 
Just inregards to the modem, I would like to DMZ my home server, and it has a static IP set on it and the VDSL modem will only let me do it for a DHCP assigned pc :( is there any way around this? even via telnet?

Must admit theres been heaps of info on this topic, and you Telecom guys are being awesome, I think I knew everything about this setup before we even arranged the install ;)


The DMZ function in the TG589vn works a little differently than some other implementations. It actually allocates the public IP via DHCP to the DMZ client - thus the reason it can only work if you have DHCP assigned. This works fine when you're putting, say, a router in the DMZ, and can have the public IP on it's WAN interface, and still have it's LAN interface configured as normal. 




Windows 7 x64 // i5-3570K // 16GB DDR3-1600 // GTX660Ti 2GB // Samsung 830 120GB SSD // OCZ Agility4 120GB SSD // Samsung U28D590D @ 3840x2160 & Asus PB278Q @ 2560x1440
Samsung Galaxy S5 SM-G900I w/Spark

84 posts

Master Geek
+1 received by user: 1


  Reply # 870842 2-Aug-2013 16:37
Send private message

I have a wierd problem As stated earlier my internet connections keeps dropping off after a few minutes
I have to either restart my computer or disdable/enadle my net work adapter. I have logged my problem with telecom but they dont seem to be making progress.
Today I downloaded Movie Planet App. While playing a movie from this site I am able to surf the inernet without dropping my connection.
Does anyone have any suggestions on how to fix my dilemma. Or should I just play a movie in the background while on the net.(one way around the problem)
Thanks for any advice

1 | ... | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | ... | 88
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.