Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




252 posts

Ultimate Geek
+1 received by user: 53


# 173282 18-May-2015 09:25
One person supports this post
Send private message

The thought of trying to get this through to the people who might actually be interested in this via normal support methods gave me the shivers, so I thought I'd mention it here first hoping it gets picked up and passed on.

Recently switched to Fibre Landline, works great.

Only minor issue is that it appears that the CLID is presenting numbers with too many leading zero's. For example calls coming from a local landline come in with 009 xxx xxxx and mobile (2D) comes in as 00022 xxx xxxx.

It's not a biggie, just means my phones often don't match the CLID to an address book entry.

Thought it was worth mentioning since this is a new service and there may be the opportunity to adjust this.

Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3
773 posts

Ultimate Geek
+1 received by user: 230


  # 1306968 18-May-2015 10:10
Send private message

Was wondering how these would be presented, as I'm looking forward to using this feature once I'm on Fibre LL.
just means my phones often don't match the CLID to an address book entry

Hopefully they can sort out the mobile calls, but the local calls could be a bigger issue.

27787 posts

Uber Geek
+1 received by user: 7272

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 1307002 18-May-2015 10:37
Send private message

What sort of phone are you using and does it have an "enable 0" option enabled in the menu?

A 0 is not sent as part of the CID on an analogue line in NZ because it it's an access code, and not part of the phone number. It's the job of the phone to add the 0 (and it's required to get a telepermit).

I'd be surprised if Spark hadn't replicated this with their VoIP setup, but if they are sending the 0 most phones have the ability to not add a 0.


 
 
 
 




252 posts

Ultimate Geek
+1 received by user: 53


  # 1307050 18-May-2015 11:02
Send private message

They are older (6 years?) panasonic cordless set. Though this is one of those "it was working fine before the cut over" situations.
I'll look to see if the "enable 0" option is available on them, thanks for the tip. In saying that, if Spark had the ability to make a change at their end to save them the pain of other customers calling them about this they may consider doing so.

461 posts

Ultimate Geek
+1 received by user: 97

Subscriber

  # 1307065 18-May-2015 11:10
Send private message

I've recently found and disabled this setting on my Uniden set too.  For me the caller ID still worked correctly, but adding a new caller to the phone book would require retyping the number to get rid of the preceding 0.
Menu - Global Setup - Insert 0 - Off is where mine was.




Speedtest

1420 posts

Uber Geek
+1 received by user: 618


  # 1307071 18-May-2015 11:17
Send private message

Do they charge extra for call ID on fibre like they still do on the POTS lines?

914 posts

Ultimate Geek
+1 received by user: 810

Trusted
Chorus

  # 1307076 18-May-2015 11:23
Send private message

GregV: Was wondering how these would be presented, as I'm looking forward to using this feature once I'm on Fibre LL.
just means my phones often don't match the CLID to an address book entry

Hopefully they can sort out the mobile calls, but the local calls could be a bigger issue.


Strangely I haven't had any problems at all with CLID on my fibre landline and I have Uniden cordless phones.




The views expressed by me are not necessarily those of my employer Chorus NZ Ltd


6562 posts

Uber Geek
+1 received by user: 1280

Trusted
Lifetime subscriber

  # 1307081 18-May-2015 11:27
Send private message

BlueShift: Do they charge extra for call ID on fibre like they still do on the POTS lines?

I believe that it's part of the baseline service now.

22061 posts

Uber Geek
+1 received by user: 4682

Trusted
Subscriber

  # 1307098 18-May-2015 12:03
Send private message

Behodar:
BlueShift: Do they charge extra for call ID on fibre like they still do on the POTS lines?

I believe that it's part of the baseline service now.


About time IMO.

Now how about some more advanced screening controls for the fiber landlines?




Richard rich.ms

8007 posts

Uber Geek
+1 received by user: 838

Subscriber

  # 1307115 18-May-2015 12:32
Send private message

Some so called PTCed phones sold here  don't have the ability to edit the  zero in the CLID field .  The lack of the leading zero in NZ has been a pain for PBX vendors since day  1  sometime resulting in special patches  to do this.  Thank god that have added this zero in their GVC SIP trunking..




Regards,

Old3eyes




252 posts

Ultimate Geek
+1 received by user: 53


  # 1307140 18-May-2015 12:58
Send private message

old3eyes: Thank god that have added this zero in their GVC SIP trunking..


So it sounds like the fibre landline CLID is actually set up how it should be. I'll check tonight to see if my phones are "compliant" with this and if I can change them to work correctly.

Thanks all for comments/suggestions.

165 posts

Master Geek
+1 received by user: 45

Trusted

  # 1307147 18-May-2015 13:06
Send private message

Must check my settings tonight as well, have the same issue which does make it a pain as the persons name is no longer displayed. Company I'm connected with doesn't charge for caller ID or voicemail...never liked that extra revenue stream the telcos cooked up (especially given those services were always provided over mobile for no additional charge)

Just changed the setting now, Uniden phone, Settings-Global-insert 0 Off. Working fine



252 posts

Ultimate Geek
+1 received by user: 53


  # 1307521 18-May-2015 21:37
Send private message

I also checked my cordless phone and indeed it has a "Insert 0" option, which was On, set to Off and it's looking good.
Thanks again, it has definitely avoided a lowering in the WAF.

27787 posts

Uber Geek
+1 received by user: 7272

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  # 1307593 19-May-2015 07:41
Send private message

I was actually just discussing this with somebody at Spark. This issue (if you want to call it that) and how to change your phone is discussed in the documentation that you would have received as part of the changeover.



252 posts

Ultimate Geek
+1 received by user: 53


  # 1307650 19-May-2015 10:22
One person supports this post
Send private message

sbiddle: I was actually just discussing this with somebody at Spark. This issue (if you want to call it that) and how to change your phone is discussed in the documentation that you would have received as part of the changeover.


I'd be interested to know what documentation I was supposed to receive. All I received once I signed up for the cut over was a single email from Spark (Downer actually) showing the steps to do the cut over by repatching the phone line in to the POTS1 port on the ONT during the allocated cut over time. The email also contained some other information about alarms etc and a couple of links - the link to the fibre terms returns a 404 and the second link is to log on to myspark, which isn't of use either yet as my account hasn't been updated to the new plan yet.

So no, I didn't receive any information about any changes I may have needed to make to my phone.

165 posts

Master Geek
+1 received by user: 45

Trusted

  # 1307653 19-May-2015 10:26
Send private message

Likewise, I received no information alerting me to that fact, only a one pager instructing where to plug in the phone line etc that was bundled in with the router I received. I did connect a few months ago however so the process may have changed in the interim.

 1 | 2 | 3
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

WLG-X festival to celebrate creativity and innovation
Posted 22-May-2019 17:53


HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07


Techweek starting around NZ today
Posted 20-May-2019 09:52


Porirua City Council first to adopt new council software solution Datascape
Posted 15-May-2019 12:00


New survey provides insight into schools' technology challenges and plans
Posted 15-May-2019 09:30


Apple Music now available on Alexa devices in Australia and New Zealand
Posted 15-May-2019 09:11


Make a stand against cyberbullying this Pink Shirt Day
Posted 14-May-2019 20:23


Samsung first TV manufacturer to launch the Apple TV App and Airplay 2
Posted 14-May-2019 20:11


Vodafone New Zealand sold
Posted 14-May-2019 07:25


Kordia boosts cloud performance with locally-hosted Microsoft Azure ExpressRoute
Posted 8-May-2019 10:25


Microsoft Azure ExpressRoute in New Zealand opens up faster, more secure internet for Kiwi businesses
Posted 8-May-2019 09:39


Vocus Communications to deliver Microsoft Azure Cloud Solutions through Azure ExpressRoute
Posted 8-May-2019 09:25


Independent NZ feature film #statusPending to premiere during WLG-X
Posted 6-May-2019 22:13


The ultimate dog photoshoot with Nokia 9 PureView #ForgottenDogsofInstagram
Posted 6-May-2019 09:41


Nokia 9 PureView available in New Zealand
Posted 6-May-2019 09:06



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.