Spark Launches new Inhome Experience - Spark Smart Modem & Spark Smart Mesh

Forums › Spark New Zealand (including Skinny and BigPipe) › Spark Launches new Inhome Experience - Spark Smart Modem & Spark Smart Mesh

1 | ... | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | ... | 78

'That VDSL Cat'
12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

Subscriber

#2578161 2-Oct-2020 15:23

catspyjamas:
Nope @hio77 - I'm with Spark and the version as of this morning on my Smart modem is v6.00.16 build01. It was v6.00.15 build05 before the upgrade today.

Ahh sneeky, they already got another build in since I left!

It's likely a version bump is all.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

grolschie

911 posts

Ultimate Geek

#2578163 2-Oct-2020 15:26

hio77:
grolschie:

What's the firmware version please?

Should be build 15. Pretty sure I sorted you with the latest before removing my access from sparks systems.

Skinny and bigpipe should be just around the corner.

Thank you, @hio77. I was wondering if I had been left in the beta system and would not get the future firmwares for my devices.

MrSteel

19 posts

Geek

#2578227 2-Oct-2020 17:56

My modem just updated to firmware v6.00.16 build01 today as well. Hopefully no more reboots like the previous one.

Gordy7

1900 posts

Uber Geek

ID Verified

Lifetime subscriber

#2578507 3-Oct-2020 10:54

My Smart Modem firmware update checks 3 October.

I am with Skinny and use their supplied Smart Modem.

I also have a spare Spark Smart modem I bought off Trademe.

I just swapped the modems to see if they would update.

0945 Skinny 6.00.15b05

0957 Spark 6.00.15b05

0959 Spark 6.00.16b01

1002 Skinny 6.00.15b05

1050 Skinny 6.00.15b05

edit: fixed typo in last two Skinny lines

Gordy

My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.

grolschie

911 posts

Ultimate Geek

#2578508 3-Oct-2020 10:57

Still on v6.00.15 build16

nzl60

3 posts

Wannabe Geek

#2578577 3-Oct-2020 13:36

I have a smart modem from BigPipe, being used on a Spark VDSL connection. It is currently running 6.10.12 build 07 firmware, but to date has not updated. With this combination of modem provider / internet service provider can I expect this unit to update or do I need to purchase a Spark smart modem?

mule

209 posts

Master Geek

#2578634 3-Oct-2020 16:30

I still have a smart mesh and smart modem all boxed up if anyone wants to make me an offer? Otherwise I will chuck them on trade me

Mighty Ape

Shop now on Mighty Ape (affiliate link).

Benji23

32 posts

Geek

#2579150 4-Oct-2020 17:10

Hi have been having issues with mine since Friday around the time of the update may be a red herring though, muliple dns rebind attacks also reclaiming leases when 1 of 2 laptop "could be either" goes to sleep drops the internet and light goes orange any help would be great thanks

kiwiandy

160 posts

Master Geek

#2579651 5-Oct-2020 15:23

Just received and installed my smartmesh today.

However when I try to login to the web interface using the admin/admin passwords as shown in the manual i get:

Your Username or Password may have error. Please check it

? any pointers please?

ashtonaut

614 posts

Ultimate Geek

#2579738 5-Oct-2020 20:09

ashtonaut: Received the BigPipe version of this device today, set up and working with minimal hassle.

Two quirks/bugs:

1) DHCP assignments are set up as .64 and up. However, once I had set up a manual static IP at .100 for a particular MAC address, all subsequent DHCP assignments started at .101 and up. Is this by design? It’s not causing an issue but seems strange.

2) Overview > Connected devices often shows a blank list. But not always. Sometimes works, sometimes doesn’t. Can’t figure out why. This is a bit of a pain.

Firmware is v6.10.12 build07.

Cheers

Has anyone else had the issues I've noted above? 6+ months later, and with updated firmware (now running BigPipe v6.10.14 build02), I still have both of these things occurring:

DHCP assignments don't start at .64 like I have configured in the modem settings, they start from .102 (there are two fixed IPs assigned by the modem at .100 and .101.
The list of connected devices is blank even though there are lots of devices connected.

michaelmurfy

meow
13217 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#2579755 5-Oct-2020 20:50

Hey guys - just thought I’d mention this is not an official support medium for Spark, and @hio77 has left Spark now. If you do have issues you’re best to raise it with Spark themselves via the official support mediums.

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

hio77

'That VDSL Cat'
12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

Subscriber

#2579757 5-Oct-2020 20:55

grolschie: Still on v6.00.15 build16

I've asked for your lock to be removed.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

hio77

'That VDSL Cat'
12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

Subscriber

#2579758 5-Oct-2020 20:56

kiwiandy:

Just received and installed my smartmesh today.

However when I try to login to the web interface using the admin/admin passwords as shown in the manual i get:

Your Username or Password may have error. Please check it

? any pointers please?

Mesh isn't set to admin/admin, it's not made to be managed - Unless you run it in standalone mode.

in modem linked mode it mirrors the modem setings.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

hio77

'That VDSL Cat'
12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

Subscriber

#2579759 5-Oct-2020 20:59

michaelmurfy: Hey guys - just thought I’d mention this is not an official support medium for Spark, and @hio77 has left Spark now. If you do have issues you’re best to raise it with Spark themselves via the official support mediums.

correct, however there are a few spark folk that do have reach to get feedback to the right places here.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

grolschie

911 posts

Ultimate Geek

#2579765 5-Oct-2020 21:10

hio77:
grolschie: Still on v6.00.15 build16

I've asked for your lock to be removed.

Brilliant. Thank you @hio77

1 | ... | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | ... | 78