Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




107 posts

Master Geek


Topic # 59327 1-Apr-2010 19:09
Send private message

Hello
Just moved house and had telestra cable at the old house and had the belkin router setup for that,now in the new house we have telecom adsl. Internet all working fine except for the wireless,how do i setup the belkin router with the telecom settings because i think it still has the old telestra settings.I can get on to the Belkin router setup page but dont know the telecom settings to put in


thanks

Create new topic
4193 posts

Uber Geek
+1 received by user: 64

Moderator
Trusted
Lifetime subscriber

  Reply # 313992 1-Apr-2010 19:16
Send private message

If you have a broadband router, then you will not be able to use it. You need an adsl modem/router all in one.
In will have a smaller rj11 phone port, and 4 network ports, rather than the 5 network ports (including 1 wan port) that Telstraclear cable requires.

So how do you have your internet working? Is a telecom supplied modem plugged into your belkin router?



107 posts

Master Geek


  Reply # 313994 1-Apr-2010 19:26
Send private message

rscole86: If you have a broadband router, then you will not be able to use it. You need an adsl modem/router all in one.
In will have a smaller rj11 phone port, and 4 network ports, rather than the 5 network ports (including 1 wan port) that Telstraclear cable requires.

So how do you have your internet working? Is a telecom supplied modem plugged into your belkin router?


No not using Belkin router, the ethernet cable is connected from the telecom modem to my laptop,when ever i connect the ethernet cable to my router it wont work because it must not have the right settings.I'm guessing all i have to do is put the right settings into the belkin router and it will work?

 
 
 
 


4193 posts

Uber Geek
+1 received by user: 64

Moderator
Trusted
Lifetime subscriber

  Reply # 313996 1-Apr-2010 19:34
Send private message

Assuming you are using windows, goto the control panel, network connections, right-click local area connection, properties, select TCP/IPv4 then click properties and make sure that you have selected, 'obtain automatically' for both options.



107 posts

Master Geek


  Reply # 314003 1-Apr-2010 20:19
Send private message

rscole86: Assuming you are using windows, goto the control panel, network connections, right-click local area connection, properties, select TCP/IPv4 then click properties and make sure that you have selected, 'obtain automatically' for both options.
yes i have done that with no luck.could it be because thw belkin router has the telestra clear settings still on it?

4193 posts

Uber Geek
+1 received by user: 64

Moderator
Trusted
Lifetime subscriber

  Reply # 314009 1-Apr-2010 20:43
Send private message

Regardless it should still work, are you plugging your computer into the ethernet ports on the Belkin?
What model is the belkin? If you have a manual, or look on belkins site, try and reset the router to factory default.

1822 posts

Uber Geek
+1 received by user: 274

Subscriber

  Reply # 314011 1-Apr-2010 20:48
Send private message

How would it still work if router WAN interface is configured with TelstraClear public IP address??




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




107 posts

Master Geek


  Reply # 314015 1-Apr-2010 20:51
Send private message

Spyware: How would it still work if router WAN interface is configured with TelstraClear public IP address??
well i presume it would not work thats why i'm trying to find out what the telecom ip address/settings are so i can type them into the rotuer



107 posts

Master Geek


  Reply # 314016 1-Apr-2010 20:53
Send private message

rscole86: Regardless it should still work, are you plugging your computer into the ethernet ports on the Belkin?
What model is the belkin? If you have a manual, or look on belkins site, try and reset the router to factory default.
I pluged a cable into the phone line then to the modem,then i pluged the yellow ethernet cable from the modem to the router and it did not work,is that the right way of doing it? at them moment to get on the internet i got the yellow ethernet cable going from the modem to the computer but i want wireless! lol

4193 posts

Uber Geek
+1 received by user: 64

Moderator
Trusted
Lifetime subscriber

Reply # 314017 1-Apr-2010 20:56
Send private message

lillow:
rscole86: Regardless it should still work, are you plugging your computer into the ethernet ports on the Belkin?
What model is the belkin? If you have a manual, or look on belkins site, try and reset the router to factory default.
I pluged a cable into the phone line then to the modem,then i pluged the yellow ethernet cable from the modem to the router and it did not work,is that the right way of doing it? at them moment to get on the internet i got the yellow ethernet cable going from the modem to the computer but i want wireless! lol


I did ask that in the first place and you said no.

I suggest you find the model number of your belkin, or the manual, and perform a reset of the unit.

Secondly, which Telecom modem are you using? As you will then need to set up a bridge between the two boxes.

1822 posts

Uber Geek
+1 received by user: 274

Subscriber

  Reply # 314019 1-Apr-2010 20:59
Send private message

Or maybe configure the Belkin WAN (wide area network) interface correctly, i.e., with a static PRIVATE adddress, gateway (modems address) etc., on same subnet as modem LAN (local area network) interface.

Obviously none of this relates to any wireless configuration.




Ross

 

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

 


Speed Test




107 posts

Master Geek


  Reply # 314023 1-Apr-2010 21:13
Send private message

Spyware: Or maybe configure the Belkin WAN (wide area network) interface correctly, i.e., with a static PRIVATE adddress, gateway (modems address) etc., on same subnet as modem LAN (local area network) interface.

Obviously none of this relates to any wireless configuration.
I reset the router back to factory settings now my computer wont even pick the router up like it did before sigh, and the modem is the stanard black one they sent out to me,i actually asked for a wireless modem but they sent that one instead. wont even let me on http://192.168.2.1 since i have reset the router back to factory settings grr

4193 posts

Uber Geek
+1 received by user: 64

Moderator
Trusted
Lifetime subscriber

  Reply # 314025 1-Apr-2010 21:16
Send private message

So when you connect your compute via ethernet cable to ethernet port 1 on the belkin, can you browse to the routers webpage?
192.168.1.1 or 0.1 or something similar.

Alternatively, when connected again, goto the command prompt, and type ipconfig what is the default gateway address?

1213 posts

Uber Geek
+1 received by user: 148


  Reply # 314028 1-Apr-2010 21:20
Send private message

Your speedtouch (black telecom adsl router) should be plugged into the wan port on the belkin, now that you've reset it you need to check your wifi list on your computer to see what networks are in the area - it will likely be called belkin (or similar) if it's secured then you'll need to find in the manual what the wpa key is otherwise if you can connect you need to get to the web interface (usually 192.168.0.1 or 192.168.1.1) and check the configuration, post any issues on your thread if you need help.



107 posts

Master Geek


  Reply # 314029 1-Apr-2010 21:24
Send private message

thanks for all your help.some how it just started working lol so now i'm happy agian :)

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel reimagines data centre storage with new 3D NAND SSDs
Posted 16-Feb-2018 15:21


Ground-breaking business programme begins in Hamilton
Posted 16-Feb-2018 10:18


Government to continue search for first Chief Technology Officer
Posted 12-Feb-2018 20:30


Time to take Appleā€™s iPad Pro seriously
Posted 12-Feb-2018 16:54


New Fujifilm X-A5 brings selfie features to mirrorless camera
Posted 9-Feb-2018 09:12


D-Link ANZ expands connected smart home with new HD Wi-Fi cameras
Posted 9-Feb-2018 09:01


Dragon Professional for Mac V6: Near perfect dictation
Posted 9-Feb-2018 08:26


OPPO announces R11s with claims to be the picture perfect smartphone
Posted 2-Feb-2018 13:28


Vocus Communications wins a place on the TaaS panel
Posted 26-Jan-2018 15:16


SwipedOn raises $1 million capital
Posted 26-Jan-2018 15:15


Slingshot offers unlimited gigabit fibre for under a ton
Posted 25-Jan-2018 13:51


Spark doubles down on wireless broadband
Posted 24-Jan-2018 15:44


New Zealand's IT industry in 2018 and beyond
Posted 22-Jan-2018 12:50


Introducing your new workplace headache: Gen Z
Posted 22-Jan-2018 12:45


Jucy set to introduce electric campervan fleet
Posted 22-Jan-2018 12:41



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.