Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 
117 posts

Master Geek


  # 108537 4-Feb-2008 18:30
Send private message

Woah this is concerning as I was just going to sign upto Fusion with # port.

157 posts

Master Geek


  # 108553 4-Feb-2008 19:47
Send private message

Has anyone successfully ported their TCNZ number and using VFX and Fusion?

WXC  is chasing their tails since my two lines went dead!, Numbers ported okay, I had two numbers ported when they came back on line and worked pretty much for an hour on Friday the 1st Feb then all went garbage.

Battling with WXC tech team to get my line up.... going in circles... reset to factory many times, spending many hours calling WXC helpdesk. The ping pong drama continues.

It’s me who put myself in to this situation, watch out guys if you are thinking of moving to WXC!! Grass aren’t green here.

 
 
 
 


191 posts

Master Geek
+1 received by user: 1


  # 108557 4-Feb-2008 20:20
Send private message

dpw:
I signed up for Fusion last Saturday 26 /1 my Internet Speed went Full Speed yesterday 31/1 and the phone was disconnected can you tell me when you expect the number to be ported across.


Actually, that's interesting...

My homeline has been disconnected too. My VFX has been active for quite some time now but there appears to be no "customer link" set up. If I call my original number, which is to be ported, I get "this number is disconnected" type of notification.

I was under the impression Xnet was going to organise all the necessary steps in porting the number across?

Gee this is a bit concerning isn't it..? It seems to be happenning to me to.  I rang Xnet/WxC Last monday and was advised that NDSL will be put on my line "in 6-10 days", and at the same time Xnet will create a VFX account for me, with a temp number.  Then, 4 days after NDSL comes online my old Telecom number will be ported across to my VFX line.  Well, my phone went dead last Friday and I found out that they've put NDSL on my line already, and I had to ring Xnet to get them to create the VFX account for me.  So right now my VFX is working fine, but I'm still waiting for the number porting bit.  If I ring my old Telecom number I too get the "this number is not allocated" message - could it mean customlink is not setup properly?  I really want to keep my old Telecom number and fingers crossed it will be ported OK.  And by the way, while I understand this few days where I could end up with a temp VFX number, Xnet did promise me that any calls to my old Telecom number would be forwarded to my VFX number, which hasn't happened at all.

Am wondering if anyone else is having the same issues?

 



3594 posts

Uber Geek
+1 received by user: 79

Trusted
WorldxChange

  # 108600 5-Feb-2008 07:54
Send private message

Shash: Has anyone successfully ported their TCNZ number and using VFX and Fusion?

WXC  is chasing their tails since my two lines went dead!, Numbers ported okay, I had two numbers ported when they came back on line and worked pretty much for an hour on Friday the 1st Feb then all went garbage.

Battling with WXC tech team to get my line up.... going in circles... reset to factory many times, spending many hours calling WXC helpdesk. The ping pong drama continues.

It’s me who put myself in to this situation, watch out guys if you are thinking of moving to WXC!! Grass aren’t green here.


Several hundred actually Wink, yours is a problem case which I had hopped was sorted on on Friday after working with you on Thursday night, this was sorted by the guys on Friday when they could reproduce the issue here, then they would have made a final change to the config to assist with your faxing issue that you comented on, I asked them to do this, I am guessing that this may be the cause of the problem and I am looking at this again,

As stated in the the other thread it appears to be some sort of corruption in YOUR config which we have to sort out, also when I looked at your accounts we had 2 devices listed for you as a 3102 and a 2102 and not knowing that you wanted the number from your 3102 moved to your new 2102 also caused some confusion, were happy to work through any issues with you and have done so on a number of occassions including helping you with the 3102 on several occassions, so in saying that the "grass aren't green here" I do think we work hard to resolve indivdual issues and will continue to do so.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

3594 posts

Uber Geek
+1 received by user: 79

Trusted
WorldxChange

  # 108602 5-Feb-2008 08:02
Send private message

wlgspotter:
dpw:
I signed up for Fusion last Saturday 26 /1 my Internet Speed went Full Speed yesterday 31/1 and the phone was disconnected can you tell me when you expect the number to be ported across.


Actually, that's interesting...

My homeline has been disconnected too. My VFX has been active for quite some time now but there appears to be no "customer link" set up. If I call my original number, which is to be ported, I get "this number is disconnected" type of notification.

I was under the impression Xnet was going to organise all the necessary steps in porting the number across?

Gee this is a bit concerning isn't it..? It seems to be happenning to me to.  I rang Xnet/WxC Last monday and was advised that NDSL will be put on my line "in 6-10 days", and at the same time Xnet will create a VFX account for me, with a temp number.  Then, 4 days after NDSL comes online my old Telecom number will be ported across to my VFX line.  Well, my phone went dead last Friday and I found out that they've put NDSL on my line already, and I had to ring Xnet to get them to create the VFX account for me.  So right now my VFX is working fine, but I'm still waiting for the number porting bit.  If I ring my old Telecom number I too get the "this number is not allocated" message - could it mean customlink is not setup properly?  I really want to keep my old Telecom number and fingers crossed it will be ported OK.  And by the way, while I understand this few days where I could end up with a temp VFX number, Xnet did promise me that any calls to my old Telecom number would be forwarded to my VFX number, which hasn't happened at all.

Am wondering if anyone else is having the same issues?






Can you send me the details of this, I will take a look and see what is happening, this has only just been put in place remember with ourselves and Telecom to help resolve sonme of the delays and confusion in customer linking so there may be holes, don't know this until I check of course.

FYI Porting actually works very well and have a large number of ports already done since number portability became available early last year so this wont be an issue, the problems appearing is the timings in getting all the services, cancelled, provisoned and redirected and then ported, there are a large amount of Telecom systems and physical work that needs to changed and updated to get a Naked DSL service and it is VERY complicated, we are trying to take the pain away and are working to try and improve the process, it will take time but we are working on it.   




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

dpw

832 posts

Ultimate Geek
+1 received by user: 14

Trusted

  # 108603 5-Feb-2008 08:10
Send private message

maverick:

Can you send me the details of this, I will take a look and see what is happening, this has only just been put in place remember with ourselves and Telecom to help resolve sonme of the delays and confusion in customer linking so there may be holes, don't know this until I check of course.

FYI Porting actually works very well and have a large number of ports already done since number portability became available early last year so this wont be an issue, the problems appearing is the timings in getting all the services, cancelled, provisoned and redirected and then ported, there are a large amount of Telecom systems and physical work that needs to changed and updated to get a Naked DSL service and it is VERY complicated, we are trying to take the pain away and are working to try and improve the process, it will take time but we are working on it.


I figured it's all just a matter of ironing out the kinks in a fledgling procedure. I'm not hugely worried since I can still use my temporary VFX number for now. As long as my original number is ported some time soon it will all be just fine and dandy.




Android user, software developer, a semi-typical (not a gamer) geek, and a Bernese Mountain Dog nut!

http://savitarbernese.com | https://nz.linkedin.com/in/danywu

3594 posts

Uber Geek
+1 received by user: 79

Trusted
WorldxChange

  # 108605 5-Feb-2008 08:13
Send private message

dpw:
maverick:

Can you send me the details of this, I will take a look and see what is happening, this has only just been put in place remember with ourselves and Telecom to help resolve sonme of the delays and confusion in customer linking so there may be holes, don't know this until I check of course.

FYI Porting actually works very well and have a large number of ports already done since number portability became available early last year so this wont be an issue, the problems appearing is the timings in getting all the services, cancelled, provisoned and redirected and then ported, there are a large amount of Telecom systems and physical work that needs to changed and updated to get a Naked DSL service and it is VERY complicated, we are trying to take the pain away and are working to try and improve the process, it will take time but we are working on it.


I figured it's all just a matter of ironing out the kinks in a fledgling procedure. I'm not hugely worried since I can still use my temporary VFX number for now. As long as my original number is ported some time soon it will all be just fine and dandy.



If this is occuring, having any details is very helpful as we can track what has or hsan't been done, if there is any issues etc it will just help us look to find any holes so we can sort them asap




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

 
 
 
 


3594 posts

Uber Geek
+1 received by user: 79

Trusted
WorldxChange

  # 108607 5-Feb-2008 08:29
Send private message

Shash: Has anyone successfully ported their TCNZ number and using VFX and Fusion?

WXC  is chasing their tails since my two lines went dead!, Numbers ported okay, I had two numbers ported when they came back on line and worked pretty much for an hour on Friday the 1st Feb then all went garbage.

Battling with WXC tech team to get my line up.... going in circles... reset to factory many times, spending many hours calling WXC helpdesk. The ping pong drama continues.

It’s me who put myself in to this situation, watch out guys if you are thinking of moving to WXC!! Grass aren’t green here.



Both Lines are now back UP Shash, They are both up and registered, there was a corruption and we have now fixed this and all should now be fine.




Yes I am a employee of WxC (My Profile) ... but I do have my own opinions as well Wink

             

https://www.facebook.com/wxccommunications

157 posts

Master Geek


  # 108608 5-Feb-2008 08:31
Send private message

maverick: As stated in the the other thread it appears to be some sort of corruption in YOUR config which we have to sort out, also when I looked at your accounts we had 2 devices listed for you as a 3102 and a 2102 and not knowing that you wanted the number from your 3102 moved to your new 2102 also caused some confusion, were happy to work through any issues with you and have done so on a number of occassions including helping you with the 3102 on several occassions, so in saying that the "grass aren't green here" I do think we work hard to resolve indivdual issues and will continue to do so.


Glad you are looking at this Phil, I have to comment this way because I lost 2 of my line on the 17th Jan in the porting process. Looking forward to this issue will be resolved today, I will be home around 5pm.

I certainly agree you have done some marvellous custom configs for me on my other vfx account which has been up over 3 weeks without any issues. Boss is looking got to go..

157 posts

Master Geek


  # 108609 5-Feb-2008 08:36
Send private message

maverick: Both Lines are now back UP Shash, They are both up and registered, there was a corruption and we have now fixed this and all should now be fine.



Thanks Phil, will check it out... who is your Boss? You deserver pay raise straight after the Sevens! 

Other help desk staff are buying time from me till you come


28 posts

Geek
+1 received by user: 1


  # 108656 5-Feb-2008 12:29
Send private message

HI Phil


Just to let you know that Cameron has sorted out my problem.

Thanks to XNet for the service.

Steven

1 | 2 | 3 
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32


Epson launches new 4K Pro-UHD projector technology
Posted 1-Jun-2019 15:26


Lenovo and Qualcomm unveil first 5G PC called Project Limitless
Posted 28-May-2019 20:23


Intel introduces new 10th Gen Intel Core Processors and Project Athena
Posted 28-May-2019 19:28


Orcon first to trial residential 10Gbps broadband
Posted 28-May-2019 11:20


Video game market in New Zealand passes half billion dollar mark
Posted 24-May-2019 16:15


WLG-X festival to celebrate creativity and innovation
Posted 22-May-2019 17:53


HPE to acquire supercomputing leader Cray
Posted 20-May-2019 11:07



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.