Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




800 posts

Ultimate Geek


# 256006 10-Sep-2019 12:11
Send private message

Hi all,

 

Got a client on Vodafone who has recently changed to Fibre from VDSL - they were using the ER-X with a modem in bridge mode before, so the ER-X is working fine on Fibre. 

 

The issue of course is the landline phone - as this is done through the UltraHub, I'm looking for a way to make this still work with the UltraHub behind the Edgerouter.

 

I'm sure this will be possible with the right combination of settings - anyone got any ideas? Thanks. 

 

 

 

Edit - just found this post, which is for the HG659 but in theory I guess it should work with the UltraHub too. I had already tried what was mentioned in that post and didn't seem to have any joy - would some ports need to be forwarded through to the UltraHub? At this stage it doesn't even seem to get an IP from the Edgerouter. 

 

 

 

 

 

 


Filter this topic showing only the reply marked as answer Create new topic
2418 posts

Uber Geek

Lifetime subscriber

  # 2314204 10-Sep-2019 12:15
Send private message

Edgerouter configured to provide address via DHCP on a vlanid=10 interface.




800 posts

Ultimate Geek


  # 2314270 10-Sep-2019 13:20
Send private message

Thank you - any chance you might be able to give a little more info on the correct way to do this?

 

 

 

In this case I'm using eth4 - so I've removed that port from switch0, then setup a VLAN interface with ID 10 on eth4. I have the UltraHub LAN IP set to 192.168.2.1 currently...am not sure what IP range I should set the VIF to and what to do about DHCP on it? Or can I set both the UltraHub WAN & Eth4 IP statically?

 

If you had the time to give a few more pointers that would be great thanks.

 

 

 

Edit - just been playing around, have set VLAN 10 on eth4, and the eth4 IP to 192.168.6.1 and the UltraHub WAN IP to 192.168.6.2, has VLAN 10 enabled in the WAN settings. The Ultrahub tells me the Fibre connection is 'up', which is further than I have been getting, but don't seem to be getting any traffic through it at all. I would assume when this is setup correctly I would be able to browse the net on a computer connected to the UltraHub? Am not on a Vodafone connection currently so am not expecting the voice to work at all. 


 
 
 
 




800 posts

Ultimate Geek


  # 2314954 11-Sep-2019 12:53
Send private message

OK - with some more playing around, managed to get the router itself going - don't know about the voice as I'm not testing it on a Vodafone network so I assume that will only work when on their own network. Will have to go and try that later. 

 

 

 

The process for ER-X was...

Remove the eth port from the switch (in this case eth3).

 

Setup a VIF on eth3 on VLAN 10.

 

Set the IP address on eth3.10 to be 192.168.6.1/24 (this can be anything, just needs to be different from the LAN IP on the Vodafone router).

 

Setup DHCP service on that same range - we found that we had to hard set DNS servers here for it to work - using the ER-X's IP didn't seem to work. 

 

 

 

Don't know yet if any port forwarding etc will be required. 




800 posts

Ultimate Geek


  # 2317175 13-Sep-2019 14:35
Send private message

The above config works perfectly with the UltraHub. No port forwarding required.

 

I had hoped removing the VLAN tag from the WAN settings on the UltraHub would do it but no joy in this case. 

 

 

 

So just to re-iterate...

 

 

 

Remove the eth port from the switch if it's part of the switch (in this case eth3).

 

 

 

Setup a VIF on eth3 on VLAN 10.

 

 

 

Set the IP address on eth3.10 to be 192.168.6.1/24 (this can be anything, just needs to be different from the LAN IP on the Vodafone router).

 

 

 

Setup DHCP service on that same range - we found that we had to hard set DNS servers here for it to work - using the ER-X's IP as the DNS didn't seem to work. 


Filter this topic showing only the reply marked as answer Create new topic



Switch your broadband provider now - compare prices


Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Vodafone New Zealand starts two year partnership with LetsPlay.Live
Posted 28-Jan-2020 11:24


Ring launches indoor-only security camera
Posted 23-Jan-2020 17:26


New report findings will help schools implement the digital technologies curriculum content
Posted 23-Jan-2020 17:25


N4L to upgrade & support wireless internet inside schools
Posted 23-Jan-2020 17:22


Netflix releases 21 Studio Ghibli works
Posted 22-Jan-2020 11:42


Vodafone integrates eSIM into device and wearable roadmap
Posted 17-Jan-2020 09:45


Do you need this camera app? Group investigates privacy implications
Posted 16-Jan-2020 03:30


JBL launches headphones range designed for gaming
Posted 13-Jan-2020 09:59


Withings introduces ScanWatch wearable combining ECG and sleep apnea detection
Posted 9-Jan-2020 18:34


NZ Police releases public app
Posted 8-Jan-2020 11:43


Suunto 7 combine sports and smart features on new smartwatch generation
Posted 7-Jan-2020 16:06


Intel brings innovation with technology spanning the cloud, network, edge and PC
Posted 7-Jan-2020 15:54


AMD announces high performance desktop and ultrathin laptop processors
Posted 7-Jan-2020 15:42


AMD unveils four new desktop and mobile GPUs including AMD Radeon RX 5600
Posted 7-Jan-2020 15:32


Consolidation in video streaming market with Spark selling Lightbox to Sky
Posted 19-Dec-2019 09:09



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.