Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




1699 posts

Uber Geek

Subscriber

# 142846 26-Mar-2014 13:40
Send private message

Hi,

I recently signed up to Snap VDSL and received the much-hyped FritzBox 7390. Whilst some of the VOIP features on the box are pretty cool (DECT base station, emailing answerphone messages and the ability to interface with my home automation software), the rest of this device is pretty hopeless IMO.

The main issue is I am having all sorts of trouble with the DHCP and DNS servers, fixed IP address assignments are just ignored, and the DNS lookups freeze periodically.

Previously I had a Vigor 120 + Netgear WNDR3700 (running DDWRT) and was completely happy with the stability and performance. However now I am on VDSL + Snap Voice Plus I need new devices if I want to replace the Fritz entirely. So first up I am pretty confident the Vigor 130 will do nicely as a dedicated VDSL modem. 

Next is the router and VOIP. I would happily go back to the WNDR3700 running DDWRT but I would then need something like the Cisco SPA122 in order to use my existing DECT phones - correct? Are there any devices out there that have some of the features that the Fritz has (w.r.t VOIP) but are not all-in-one modem/routers? What is the best set of devices/config for VDSL + WIFI Router + VOIP in your opinions?

Secondly, if I did use the SPA122, what sort of features do I get? Is there any sort of API I could 'hack' into to retrieve incoming caller IDs etc? What about answerphone messages? I presume if I don't have a Fritz then the only way to do this sort of thing is via cloud based VOIP services - which I don't think Snap provide.

I am pretty good with the IP side of things, but am new to this VOIP business - so any help, tips or suggestions would be most welcome!!

Cheers,
Ben

Create new topic
'That VDSL Cat'
11006 posts

Uber Geek

Trusted
Spark
Subscriber

  # 1013177 26-Mar-2014 14:00
Send private message

Although it would take a bit to get perfect, have ypu considered making the netgear handle the dchp for your fritz?




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.




1699 posts

Uber Geek

Subscriber

  # 1013181 26-Mar-2014 14:05
Send private message

Yeah I did try that initially and it got very messy, very quickly. I ended up ringing Snap support asking if this was doable, and they stated the Fritz wouldn't work in that config. Not sure if they were just fobbing me off, or if it genuinely can't work like that, but I reverted back after that call. 

It doesn't look like there is much out there that can match the Fritz (for VOIP features at least) so I might look at running my own DHCP/DNS servers on an Ubuntu server I have on my LAN (e.g. dnsmasq).

Seems a bit of a waste spending all that money on the Fritz, only to use it for the VOIP stuff, but I am not sure there are many other options.

Would love a cheaper device that does all the clever VOIP stuff in a standalone device. Then I could use a dedicated modem (Vigor 130) and a dedicated router (WNDR3700) to handle their jobs respectively.

 
 
 
 




1699 posts

Uber Geek

Subscriber

  # 1020637 8-Apr-2014 13:47
Send private message

Ok - so I am seriously considering dropping the Fritzbox and buying a Draytek 130 modem. Just want to make sure the 130 will do all my routing and NAT/port forwarding? That is pretty much all I am using the Fritz for currently, as I have dnsmasq running on my home server doing all the DHCP/DNS leasing etc. I am going to install Freeswitch to handle the VOIP side of things.

So can anyone see any holes if I was to just replace the Fritz with a Draytek 130?

2078 posts

Uber Geek

Subscriber

  # 1020655 8-Apr-2014 14:30
Send private message

SumnerBoy: Yeah I did try that initially and it got very messy, very quickly. I ended up ringing Snap support asking if this was doable, and they stated the Fritz wouldn't work in that config. Not sure if they were just fobbing me off, or if it genuinely can't work like that, but I reverted back after that call. 


Really?

I had that setup at one point, fixed IP address on the Fritz and dhcp served from a Linksys WAP54GL running DD-WRT.  It worked OK.

My current setup has the Draytek Vigor 130 and a Ubiquity edgerouter lite that sets up the PPPoE session and handles the routing.

In the setup you are describing the Vigor 130 should work fine.  Just make sure it has the latest firmware (I think 1.5).  I was running 1.3.1 (I think) and that worked in a similar configuration to that you propose.  1.3.1 doesn't work with PPPoE from outside of the modem.



1699 posts

Uber Geek

Subscriber

  # 1020678 8-Apr-2014 14:35
Send private message

Hey Graemeh, good to hear. And as far as you know the Draytek has no issues doing port forwarding etc? Just wary it might not be the most powerful router, since it is really just a modem (or am I mistaken?). I have a 16 port gigabit switch which all my network devices are plugged into so the single LAN port is fine in that respect.

2078 posts

Uber Geek

Subscriber

  # 1020683 8-Apr-2014 14:39
Send private message

SumnerBoy: Hey Graemeh, good to hear. And as far as you know the Draytek has no issues doing port forwarding etc? Just wary it might not be the most powerful router, since it is really just a modem (or am I mistaken?). I have a 16 port gigabit switch which all my network devices are plugged into so the single LAN port is fine in that respect.


I did not ever configure port forwarding but I assume it works OK for basic configurations.

If it doesn't do something in future you can always set it up to work just as a modem and supplement it with a dedicated router managing the PPPoE connection.

I can highly recommend the Ubiquity Edgerouter lite as long as you accept their documentation is rather limited.



1699 posts

Uber Geek

Subscriber

  # 1020685 8-Apr-2014 14:42
Send private message

Yep good point, I have just installed a Ubiquity UAP-LR and have been pretty impressed with the hardware. I am sure the Edgerouter is good as well.

Previously (when I was on ADSL2) I had the Draytek Vigor 120 + Netgear WNDR3700 managing the PPPoE connection. It was a great setup, very reliable and stable. 

Just trying to minimise the number of new devices I need to buy to replace the Fritz!

 
 
 
 


2078 posts

Uber Geek

Subscriber

  # 1020687 8-Apr-2014 14:49
Send private message

SumnerBoy: Just trying to minimise the number of new devices I need to buy to replace the Fritz!


I have taken the other approach, one function per device, that way if one is not doing the job it can be replaced.

The only reason I added the router (instead of using the built in one in the modem) was that I wanted to give different DNS server assignments to different machines in the network.  I couldn't find a way to do that in the modem.



1699 posts

Uber Geek

Subscriber

  # 1020705 8-Apr-2014 14:52
Send private message

Yep - I can see the benefit in that approach - that is how I was doing things previously as well. Running dnsmasq on my home server (Ubuntu) means I can remove all DHCP/DNS requirements from my router however. So now all I need is a modem and simple router with NAT/port forwarding. Everything else is handled elsewhere.

Have you looked into dnsmasq?

2078 posts

Uber Geek

Subscriber

  # 1020725 8-Apr-2014 15:15
Send private message

Thanks, I'll have a look at DNSMASQ.  At the moment things are working OK with all LAN clients using the unblock-us DNS servers.

Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41


Vodafone makes voice of 4G (VoLTE) official
Posted 4-Oct-2019 07:36


2degrees Reaches Milestone of 100,000 Broadband Customers
Posted 1-Oct-2019 09:17


Nokia 1 Plus available in New Zealand from 2nd October
Posted 30-Sep-2019 17:46


Ola integrates Apple Pay as payment method in New Zealand
Posted 25-Sep-2019 09:51


Facebook Portal to land in New Zealand
Posted 19-Sep-2019 18:35


Amazon Studios announces New Zealand as location for its upcoming series based on The Lord of the Rings
Posted 18-Sep-2019 17:24


The Warehouse chooses Elasticsearch service
Posted 18-Sep-2019 13:55


Voyager upgrades core network to 100Gbit
Posted 18-Sep-2019 13:52



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.