![]() ![]() ![]() |
|
So no UFB available where I am. Did anyone manage to figure out a workaround for the SPARK HG659b VoIP over VDSL?
ashtonaut: I gave up I'm afraid. Borrowed a FritzBox until UFB was available.
So can you confirm the FritzBox worked on VDSL with VOIP?
I've been having an impossible time trying to configure our 2talk phones to work after a move and new connection - ADSL with 2degrees - No problem, UFB with 2degrees - No problem.
VDSL with Spark - GRRRRRRR!!!!
If its just a case of grabbing a FritzBox I'll do that.
Thanks, Dan
soundplusnz:
ashtonaut: I gave up I'm afraid. Borrowed a FritzBox until UFB was available.
So can you confirm the FritzBox worked on VDSL with VOIP?
I've been having an impossible time trying to configure our 2talk phones to work after a move and new connection - ADSL with 2degrees - No problem, UFB with 2degrees - No problem.
VDSL with Spark - GRRRRRRR!!!!
If its just a case of grabbing a FritzBox I'll do that.
Thanks, Dan
Just get an ATA....
Cisco SPA112, Yeastar TA100 (or TA200), Grandstream whatever.... They will all do a better job than the router.
ashtonaut: Yes, I can confirm that a Fritz 7390 worked fine with 2talk and Spark VDSL.
For those interested, I have it working on the HG659b.
Turns out it was a TCP setting in the phone setup - defaulted to UDP on the SIP Transport.
Message waiting light also to off, now all lines appear and I have voicemail on each one, flags a message and indicator when theres a VM and all lines ring as they should.
Beer for me tonight!
Best,
Dan
Which part was the solution??
Regards,
Old3eyes
old3eyes:
Which part was the solution??
"Turns out it was a TCP setting in the phone setup - defaulted to UDP on the SIP Transport."
You need to change the transport setting from UDP to TCP.
Thanx for that info. I guess this worked OK before you got the new router??
Regards,
Old3eyes
old3eyes:
Thanx for that info. I guess this worked OK before you got the new router??
Yes - I had a TG589 and UDP wasn't an issue.
Dulouz:
old3eyes:
Thanx for that info. I guess this worked OK before you got the new router??
Yes - I had a TG589 and UDP wasn't an issue.
Thanx..
Regards,
Old3eyes
|
![]() ![]() ![]() |