Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




80 posts

Master Geek
+1 received by user: 3


Topic # 165975 26-Feb-2015 14:13
Send private message

We are having UFB (hopefully) installed in the next few weeks, I rang and organised it today. My concern is we have an alarm which rings our cellphones when it goes off and we have been told this is likely to be affected if we switch to UFB.

I've seen a little bit on changing the monitored alarm to VOIP or IP. I'm not 100% sure on what this all means so would someone be able to break it down for me and advise me on what the best way to go would be if the alarm is affected by the UFB install and which option would be the cheapest.

Thanks

Create new topic
7836 posts

Uber Geek
+1 received by user: 2582

Subscriber

  Reply # 1247115 26-Feb-2015 14:20
Send private message

something like this may be what you are lookign for

ALARMSERVER AS 200

27266 posts

Uber Geek
+1 received by user: 6692

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  Reply # 1247136 26-Feb-2015 14:50
Send private message

An alarm just dialing out to a phone will work fine over VoIP. You will however need to rewire your new connection so the alarm can be integrated with it in the usual grabber fashion.

A monitored alarm that uses an alarm protocol such as ContactID should not be relied on to work over VoIP as at best it'll be 98% reliable. You need to buy an adapter such as the one above to convert it to IP.


 
 
 
 


309 posts

Ultimate Geek
+1 received by user: 14

Subscriber

  Reply # 1247139 26-Feb-2015 14:55
Send private message

Hi. 

I work for an alarm monitoring company. A very common question we are getting these days. 
It depends on how your alarm is communicating to your cell now. If via std copper phone line, then it probably won't after connecting to UFB. 

Depending on the age and type of your alarm system, then there are numerous options for moving forward. Most major brands will offer solutions to be able to report via text and/or app. I Currently use the Paradox app. 

There would be a cost for the communicator and you would have to supply a sim card with data plan. 

1 post

Wannabe Geek


  Reply # 1248685 1-Mar-2015 08:48
Send private message

If you want the alarm to just call your cellphone, it will probably work fine over your VOIP connection, providing that the alarm system is actually still connected to your new setup. If you use any function on your phone to acknowledge the alarms message, to stop it calling repeatedly, then that may not work correctly, but it's worth trying.
If using a monitoring station, then, yes you would have to add an ethernet or GPRS module to the alarm to have the signals decoded correctly and reliably. Depending on the brand of alarm, there are some pretty good native add-on modules to enhance the functionality.

4474 posts

Uber Geek
+1 received by user: 849

Trusted
Lifetime subscriber

  Reply # 1248733 1-Mar-2015 10:22
Send private message

Have a look at AlarmNZ for add on IP module with GSM backup

https://alarmnz.com







80 posts

Master Geek
+1 received by user: 3


  Reply # 1249618 2-Mar-2015 16:10
Send private message

Thanks for the replies. I think I have a bit of research to do. We did try to get UFB last year and the guy who scoped the job said we could keep the copper line meaning the alarm would still call our cellphones. I'll see what happens when they come again.

Thanks again!

1 post

Wannabe Geek


  Reply # 1263770 20-Mar-2015 03:24
Send private message

I would like to suggest Contact ID as it was also mentioned above. There is a VoIP software (http://voip-sip-sdk.com/) that can be used to send alerts to the Central Station. (Central Station is a common term used to refer to a company that provides services to monitor burglar, fire and residential alarm systems.) It allows you to communicate with the Central Station over VoIP by using your own application.  It means that this VoIP software enables you to receive Contact ID alerts coming from your alert system when there is an alarm in case of emergency. It is also possible to send out any alarm as if that would been sent by an alarm system. All this is possible with your preferred application through your VoIP network.

It would be too extensive to describe this solution here in more details, so if you are interested in this solution, here you can learn more: http://voip-sip-sdk.com/p_577-send-and-receive-contact-id-alerts-over-voip-with-csharp-application-voip.html

1984 posts

Uber Geek
+1 received by user: 133

Trusted

  Reply # 1279741 9-Apr-2015 15:29
Send private message

shelford: Thanks for the replies. I think I have a bit of research to do. We did try to get UFB last year and the guy who scoped the job said we could keep the copper line meaning the alarm would still call our cellphones. I'll see what happens when they come again.

Thanks again!


You can definitely still keep the copper line, but your internet provider may not want to use it and even if they do the wiring may not be connected correctly which doesn't help when the line gets moved over. The Chorus guy is not required to get your alarm connected. Most internet providers do not use the Chorus line, so your provider should discuss with you whether they are going to connect the VoIP phone output of their router/gateway to your existing phones.




Qualified in business, certified in fibre, stuck in copper, have to keep going  ^_^

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.