Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




27 posts

Geek


Topic # 81871 19-Apr-2011 15:34
Send private message

I have a linksys PAP2T connected to Saturn cable via a linksys router, and plugged into one analogue phone connection is a Panasonic cordless phone base-station model KX-TCD430NZW. With the devices powered from their own mains adaptors, everything works.
But if the mains power goes off, I loose all communications.
So the plan is to use a 12v battery to power the cable modem, the router, the voip adaptor and the cordless phone. The voip adaptor and the cordless phone run off 6volts, so I made an adaptor to provide 6v from the 12v battery.
With either the voip adaptor or the cordless phone powered from the 6v adaptor, everything still works, but when both the voip adaptor and the cordless phone are both powered from the 6v adaptor, off-hook is not recognised, i.e. I don't get dial tone, and the voip adaptor still shows on-hook, idle.

I have tested for continuity between the power connections and the phone connections with a multimeter, and there is no connection on either device, so I can't see why running off a common power supply should make any difference.

Any ideas anyone.

Smiffy

Create new topic
4965 posts

Uber Geek
+1 received by user: 1992

Trusted
Subscriber

  Reply # 460534 19-Apr-2011 15:41
Send private message

Not enought watts output to run both devices at once




Chorus has spent $1.4 billion on making their xDSL broadband network faster. If your still stuck on ADSL or VDSL, why not spend from $150 on a master filter install to make sure you are getting the most out of your connection?
I install - Naked DSL, DSL Master Splitters, VoIP, data cabling and general computer support for home and small business.
Rural Broadband RBI installer for Ultimate Broadband and Full Flavour

 

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com


20062 posts

Uber Geek
+1 received by user: 3736

Trusted
Subscriber

  Reply # 460538 19-Apr-2011 15:47
Send private message

connecting devices designed to operaye off isolated powersupplies together seldom works how you want.

I would just get some isolated dc-dc converters rather than stuff around more, but you may find that swapping the phoneline polarity helps. but it could make it worse.




Richard rich.ms

 
 
 
 


80 posts

Master Geek
+1 received by user: 2


  Reply # 460549 19-Apr-2011 16:18
Send private message

This is an interesting thread for me as I am wanting to set up a similar short term emergency back up if we get power failure. I am not concerned to get immediate kick in but would like to know I can power up for a few hours if the power goes out. I was planning to just buy a 300w inverter from Dick Smith and run of the car power socket. I would be powering a 3G router and ata and a cordless phone. Any other ideas for a back up system would be appreciated too.



27 posts

Geek


  Reply # 460552 19-Apr-2011 16:20
Send private message

coffeebaron: Not enought watts output to run both devices at once


Thanks.
Voltage is stable when none, one or both are powered, so that's not the problem.
Smiffy



27 posts

Geek


  Reply # 460574 19-Apr-2011 16:50
Send private message

richms: connecting devices designed to operaye off isolated powersupplies together seldom works how you want.

I would just get some isolated dc-dc converters rather than stuff around more, but you may find that swapping the phoneline polarity helps. but it could make it worse.


The phone polarity line idea seemed hopeful, but it made no difference.

I have a cheap DC-DC converter, (15-24 volts out), but that has continuity between negative in and out, so something like that would be no good, as you said it would need to be properly isolated.

Smiffy

20062 posts

Uber Geek
+1 received by user: 3736

Trusted
Subscriber

  Reply # 460581 19-Apr-2011 17:12
Send private message

when a friend needed to sort out isolation between the supply for the rf amp and ir repeaters that used the coax a cheap module from either rs or farnell did the trick. i have seen similar looking ones on ebay. im on mobile so cant really go looking but i think it was about $20 and was good to about 4 watts or so.




Richard rich.ms



27 posts

Geek


  Reply # 460921 20-Apr-2011 13:20
Send private message

I had a look at the voltages when both are being powered from their own mains adaptors. The voltage between the two negatives sits around 40v when the phone is on-hook, and close to zero when the phone is off-hook. No wonder they won't work together with a common supply.
I can't isolate the phone line from the DC as low DC resistance is what signals off-hook (if I remember correctly), so I will have to keep the power supplies isolated.

Given that I intend to connect up four things, and I already have a 12VDC to 220VAC inverter, it would seem foolish to spend more money on isolated DC-DC converters.

Thanks for your ideas, but I'll go with the messy and inefficient but cheap solution.

Smiffy

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

How Oppo shakes New Zealand’s phone market
Posted 22-Aug-2017 18:32


Recognition for top small business advisors
Posted 22-Aug-2017 17:23


OPPO R11 dual 20MP camera phone debuts in New Zealand
Posted 22-Aug-2017 15:45


Intel introduces new 8th Generation processors
Posted 21-Aug-2017 19:02


Trend Micro launches Home Network Security
Posted 21-Aug-2017 18:38


Avondale College students at top of Microsoft Office Specialist World Championship
Posted 21-Aug-2017 14:11


Garmin introduces inReach SE+ and inReach Explorer+
Posted 21-Aug-2017 14:05


Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.