Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
635 posts

Ultimate Geek


  # 915445 15-Oct-2013 14:16
Send private message

BinaryLimited: ok something new....
the only driver that installed was the usb 3.0.... once the driver installs it moves to the next screen and get an awesome "installation failed, please reboot " message


There are 4 revisions of that motherboard, make sure you have the right one.

488 posts

Ultimate Geek

Trusted

  # 915486 15-Oct-2013 15:57
Send private message

I might suggest you go to your BIOS and set the SATA drivers to 'compatible' mode or similar. There may also be a setting to disable the USB3 or have them detected as USB2. This would be a way to make sure the native drivers work. Once the OS is installed, you can dick with the drivers and performance tune it, getting from compatible SATA to SATA3 is well documented and easy to do (generally speaking).

 
 
 
 




791 posts

Ultimate Geek

Trusted

  # 915505 15-Oct-2013 16:16
Send private message

@browned : rev1 here :) doubled checked that

@gundar : sata is sroted and fine. usb3 is now all disabled.

@CyaBro : yeah the usb3 drivers seemed like it was exactly what it needed? when disbaling usb3 rubbish in my bios i dont get asked for drivers anymore.


however i still landedup with the same crap message.
" Installation Failed, Please restart "


viewing the log i get the following :
win7 Setup exited with 31
UIBackEnd : : RunWindowsSetup : Exited (0x80004005)
UIBackEnd : : Launch : Exited (0X80004005)
Failed to Launch windows setup

 

 






791 posts

Ultimate Geek

Trusted

# 915701 15-Oct-2013 20:24
Send private message

OK to recap everything...

 

  • Removed all Ram, inserted only 1 stick of ram.
  • Tried installing OS on 2 different HDD's
  • No raid setup
  • mounted the iso to 2 different USB's ( 8GB )
  • Tried installation on a different PC with 2 different HDD's.
  • Formatted both hdd's and removed all partitions.
  • Installed required drivers ( not a problem anymore )
  • Removed all addon hardware ( GPU etc )

Still get this error :
win7 Setup exited with 31
UIBackEnd : : RunWindowsSetup : Exited (0x80004005)
UIBackEnd : : Launch : Exited (0X80004005)
Failed to Launch windows setup



Anyone got more ideas?




1528 posts

Uber Geek

Subscriber

# 915711 15-Oct-2013 20:54
Send private message

cant remember offhand but hard drive had to be around 160GB minimum.  No way will work on 8GB




HTPC Intel Pentium G3258 cpu, Gigabyte H97n-wifi motherboard, , 8GB DDR3 ram, onboard  graphics. Hauppuage HVR 5500 tuner,  Silverstone LC16M case, Windows 10 pro 64 bit using Nextpvr and Kodi




791 posts

Ultimate Geek

Trusted

  # 915712 15-Oct-2013 20:57
Send private message

Gilco2: cant remember offhand but hard drive had to be around 160GB minimum.  No way will work on 8GB


my bad : Used 2 different USB's (8gb) to install the OS on.
Corrected : mounted the iso to 2 different USB's ( 8GB )

also, the hdd's i used ...one was 500gb and the other 250gb.




1528 posts

Uber Geek

Subscriber

  # 915713 15-Oct-2013 21:01
Send private message

BinaryLimited:
Gilco2: cant remember offhand but hard drive had to be around 160GB minimum.  No way will work on 8GB


my bad : Used 2 different USB's (8gb) to install the OS on.
Corrected : mounted the iso to 2 different USB's ( 8GB )

also, the hdd's i used ...one was 500gb and the other 250gb.
dont know then sorry. On mine I installed to a 240GB SSD and used Windows 7 64bit motherboard drivers and all went well.

edit to say I used a USB external cd drive to install from.
also forgot to say, I only had the 1 hdd installed that I wanted os on then once installed added my data hard drives,




HTPC Intel Pentium G3258 cpu, Gigabyte H97n-wifi motherboard, , 8GB DDR3 ram, onboard  graphics. Hauppuage HVR 5500 tuner,  Silverstone LC16M case, Windows 10 pro 64 bit using Nextpvr and Kodi


 
 
 
 




791 posts

Ultimate Geek

Trusted

  # 915716 15-Oct-2013 21:07
Send private message

Gilco2:
BinaryLimited:
Gilco2: cant remember offhand but hard drive had to be around 160GB minimum.  No way will work on 8GB


my bad : Used 2 different USB's (8gb) to install the OS on.
Corrected : mounted the iso to 2 different USB's ( 8GB )

also, the hdd's i used ...one was 500gb and the other 250gb.
dont know then sorry. On mine I installed to a 240GB SSD and used Windows 7 64bit motherboard drivers and all went well.


yeah, i also used windows 7 drivers. Atleast i know im on the right path with that.

Thing i cant understand is that after all the reading on different forums...people mention that Home Server is based on Server 2008.
How is it im able to install Server 2008 and Server 2012 on the same machine but not Home Server 2011?




2130 posts

Uber Geek


  # 915761 15-Oct-2013 22:08
Send private message

An install method that works well for headless machines, is to begin the install on a different machine, then, at the first reboot, pull the drive and bung it in the target machine. Could be worth a crack.

And the HDD is supposed to be bigger than 160GB, but there are a few ways around that. I'm using a 60GB SSD in mine no problem at all.




Location: Dunedin

 




791 posts

Ultimate Geek

Trusted

  # 915762 15-Oct-2013 22:13
Send private message

andrewNZ: An install method that works well for headless machines, is to begin the install on a different machine, then, at the first reboot, pull the drive and bung it in the target machine. Could be worth a crack.

And the HDD is supposed to be bigger than 160GB, but there are a few ways around that. I'm using a 60GB SSD in mine no problem at all.


Already tried that,won't install on both machines.







791 posts

Ultimate Geek

Trusted

  # 915765 15-Oct-2013 22:16
Send private message

They are both gigabyte motherboards but different models




238 posts

Master Geek


  # 917164 18-Oct-2013 18:54
Send private message

From memory, and based on where you're saying you're up to in the install process, it's definitely the disk controller drivers that it's after.

From the gigabyte site, the drivers are one of these:

 

  • AMD SATA RAID Driver (Preinstall driver, press F6 during Windows* setup to read from floppy) 3.3.1540.33 0.38 MB 2012/10/25 Asia China America EuropeEurope(Russia) : FTP / Http 
  • AMD SATA AHCI Driver (Preinstall driver, press F6 during Windows* setup to read from floppy) 1.2.001.0331 0.28 MB 2012/10/25 Asia China America EuropeEurope(Russia) : FTP / Http 
  • Marvell RAID Driver 1.1.0.6 0.43 MB 2011/08/16 Asia China America EuropeEurope(Russia) : FTP / Http 
  • Marvell AHCI Driver 1.1.0.6 0.43 MB 2011/08/16 Asia China America EuropeEurope(Russia) : FTP / Http 

It depends on the BIOS settings and what ports they're plugged in on.Cause it's installing from WinPE, you can put the drivers on a USB stick.Are you in Auckland? If so, I could take a look...

Cloud Guru
4060 posts

Uber Geek

Trusted
Snowflake
Subscriber

  # 917191 18-Oct-2013 19:58
Send private message

have you tried updating the BIOS to the latest version, then taking the "load optimal defaults" (or equivalent) to reset the bios back to 'factory'?






791 posts

Ultimate Geek

Trusted

  # 917199 18-Oct-2013 20:28
Send private message

fastmikey: From memory, and based on where you're saying you're up to in the install process, it's definitely the disk controller drivers that it's after.

From the gigabyte site, the drivers are one of these:

AMD SATA RAID Driver (Preinstall driver, press F6 during Windows* setup to read from floppy) 3.3.1540.33 0.38 MB 2012/10/25 Asia China America EuropeEurope(Russia) : FTP / Http AMD SATA AHCI Driver (Preinstall driver, press F6 during Windows* setup to read from floppy) 1.2.001.0331 0.28 MB 2012/10/25 Asia China America EuropeEurope(Russia) : FTP / Http Marvell RAID Driver 1.1.0.6 0.43 MB 2011/08/16 Asia China America EuropeEurope(Russia) : FTP / Http Marvell AHCI Driver 1.1.0.6 0.43 MB 2011/08/16 Asia China America EuropeEurope(Russia) : FTP / Http It depends on the BIOS settings and what ports they're plugged in on.Cause it's installing from WinPE, you can put the drivers on a USB stick.Are you in Auckland? If so, I could take a look...
managed to fix the solution today. Had to remake the ISO.

Thanks for the help everyone.




1 | 2 
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Arlo unveils its first video doorbell
Posted 21-Oct-2019 08:27


New Zealand students shortlisted for James Dyson Award
Posted 21-Oct-2019 08:18


Norton LifeLock Launches Norton 360
Posted 21-Oct-2019 08:11


Microsoft New Zealand Partner Awards results
Posted 18-Oct-2019 10:18


Logitech introduces new Made for Google keyboard and mouse devices
Posted 16-Oct-2019 13:36


MATTR launches to accelerate decentralised identity
Posted 16-Oct-2019 10:28


Vodafone X-Squad powers up for customers
Posted 16-Oct-2019 08:15


D Link ANZ launches EXO Smart Mesh Wi Fi Routers with McAfee protection
Posted 15-Oct-2019 11:31


Major Japanese retailer partners with smart New Zealand technology IMAGR
Posted 14-Oct-2019 10:29


Ola pioneers one-time passcode feature to fight rideshare fraud
Posted 14-Oct-2019 10:24


Spark Sport new home of NZC matches from 2020
Posted 10-Oct-2019 09:59


Meet Nola, Noel Leeming's new digital employee
Posted 4-Oct-2019 08:07


Registrations for Sprout Accelerator open for 2020 season
Posted 4-Oct-2019 08:02


Teletrac Navman welcomes AI tech leader Jens Meggers as new President
Posted 4-Oct-2019 07:41


Vodafone makes voice of 4G (VoLTE) official
Posted 4-Oct-2019 07:36



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.