Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




51 posts

Master Geek
+1 received by user: 18


# 173633 30-May-2015 13:53
Send private message

Here's a weird thing. My Win7Pro desktop has been running happily for a couple of years, booting from a 64Gb SSD with a couple of internal HDs to store data. This morning it wouldn't boot from the SSD and kept flying into repair mode -- nothing would persuade it to boot.

Luckily I have a new 120Gb SSD which I was planning to clone my boot drive to next week. So I did a fresh install of Windows. That boots fine, albeit as a new PC. (I'd forgotten how annoying default Windows installation can be). So far so good.

When I boot from the new disk I can see my old SSD (labelled H: ) and all of the original files appear to be intact. I ran chkdsk on H: and it fixed some bad sectors. What I'd like to do is boot from the old (smaller) SSD, clone that across to the bigger SSD, then make that one my boot drive. But after disconnecting the new drive and changing the BIOS boot drive back to the smaller SSD, I still can't boot from that drive and the PC goes back into the endless loop of repair pages.

As I can see the 64Gb SSD, why can't I boot from it? Any help appreciated.

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1314601 30-May-2015 14:14
Send private message

SSDs fail. I had one do something similar a couple of years back, an early generation SSD. Throw it out.

Mad Scientist
20323 posts

Uber Geek
+1 received by user: 2769

Trusted
Lifetime subscriber

  # 1314602 30-May-2015 14:15
One person supports this post
Send private message

maybe the boot sector was corrupt??




Swype on iOS is detrimental to accurate typing. Apologies in advance.


 
 
 
 




51 posts

Master Geek
+1 received by user: 18


  # 1314607 30-May-2015 14:28
Send private message

timmmay: SSDs fail. I had one do something similar a couple of years back, an early generation SSD. Throw it out.

I'll happily chuck it but I would like to retrieve some the info first. As I can view the drive and all of the files on it, I presume that it's not entirely buggered.

What I'd really like to retrieve is my registery, user settings and so forth.

As an aside, using a clean install of Windows and Firefox is an eye opener, especially the sheer numbers of ads on the news sites. Jeez it's chronic!

14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1314608 30-May-2015 14:33
One person supports this post
Send private message

Abandon the registry, it'll be full of junk. Restore the data files from your backups... you have backups right? It doesn't take that long to tweak things again.

This hosts file helps block ad server at the host file level, it's near the first thing I do on new computers. That and AdBlock plus. When I use my wifes computer (who won't let me do that) the amount of annoying flashing, moving, noisy ads on the internet is a real pita.



51 posts

Master Geek
+1 received by user: 18


  # 1314612 30-May-2015 14:48
Send private message

I have full weekly backups of all my data. That's not a problem.

Most of my pgms run from the D: drive and they're all present and correct. But because they're not present in the new registry, nothing works. I reckon it'll be easier to move my old registry across to the new drive than reinstall dozens of big pgms. I'm hoping for an easy solution if possible.

BDFL - Memuneh
63573 posts

Uber Geek
+1 received by user: 14055

Administrator
Trusted
Geekzone
Lifetime subscriber

  # 1314621 30-May-2015 15:04
One person supports this post
Send private message


51 posts

Master Geek
+1 received by user: 18


  # 1314651 30-May-2015 15:30
Send private message

freitasm: Reinstall the programs. There's no way the old registry will not bring garbage with it.

But I like the garbage. In other words, my PC was running perfectly, but the C: drive became a little crowded.

Damn Adobe for forcing users to install Photoshop onto the C: drive!



 
 
 
 


629 posts

Ultimate Geek
+1 received by user: 56


  # 1314702 30-May-2015 16:54
Send private message

DigiDog: As I can see the 64Gb SSD, why can't I boot from it?


You can read it, but can you write to it?

DigiDog: Damn Adobe for forcing users to install Photoshop onto the C: drive!


Can you use an NTFS junction for this?
Been a while since I used one, but something like:

MKLINK /J junctionName targetDirectory





#include <standard.disclaimer>


14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1314712 30-May-2015 17:01
Send private message

In addition to your data backups you have an image or two of your operating system, right? Macrium reflect is free and works well. This is the reason I try not to keep a load of stuff on the C drive - it keeps my image files small.

2115 posts

Uber Geek
+1 received by user: 1191


  # 1314717 30-May-2015 17:14
Send private message

I find the tone here a little unhelpful, you guys are usually better than this. :/

Because it appears the old SSD is partially working, I'd boot with the new install, then using something to backup/image the old drive to a new one and try booting the old install from the new disk.




Location: Dunedin

 


14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1314720 30-May-2015 17:19
Send private message

Sorry, rum increases my sarcasm levels.

You can try, but I doubt it will work. Honestly a reinstall isn't that hard to get working how you want, then save an image once you have it in a good state, updates applied, basic apps installed.



51 posts

Master Geek
+1 received by user: 18


  # 1314767 30-May-2015 18:35
Send private message

alexx:You can read it, but can you write to it?

Sorry for the delay... I've been running System Recovery... with no luck.

Yes I can write to the old SSD. I just copied a 1Mb filer across as a test.



51 posts

Master Geek
+1 received by user: 18


  # 1314770 30-May-2015 18:44
Send private message

andrewNZ:Because it appears the old SSD is partially working, I'd boot with the new install, then using something to backup/image the old drive to a new one and try booting the old install from the new disk.

That's what I was hoping to do. The new SSD is booting fine and I can see (and write to) the old SSD. In fact the old SSD reports as healthy and is working in every respect, except when I nominate it as the boot drive. I've tried running bootrec.exe with the /FixMbr flag and while that exits with a success message, I suspect it's checking the new SSD rather than the old one. There's not much feedback when you're runnign from a CMD prompt.

I've downloaded Casper to clone the disk but I'm keeping that in reserve as it won't clone to the boot disk, which is what I need. If I can get the small SSD to boot, even once, I can clone from that to the new disk. That's my ideal scenario, but I'm running out of ideas.

And hey... thanks for all your help to date guys. I haven't taken any offense, yet. ;-)



51 posts

Master Geek
+1 received by user: 18


  # 1314773 30-May-2015 18:48
Send private message

timmmay: Honestly a reinstall isn't that hard to get working how you want...

The reinstall isn't a problem, even if reinstalling Photoshop, Office and a few other graphics programmes would take a while. It's all of those little tweaks, plugins and utils that make me reluctant to start over from scratch.

I thought I was good at backups, with weekly and monthly schedules to two external HDs. Once I get this one fixed, I think I'm going to buy a backup SSD and clone the boot drive to that at least once a month. In retrospect.

14785 posts

Uber Geek
+1 received by user: 2750

Trusted
Subscriber

  # 1314776 30-May-2015 18:50
Send private message

No need to clone, just write image to HDD using macrium. Keep their boot environment on USB key, recovery to any disk takes minutes.

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18


E-scooter share scheme launches in Wellington
Posted 17-Jun-2019 12:34


Anyone can broadcast with Kordia Pop Up TV
Posted 13-Jun-2019 10:51


Volvo and Uber present production vehicle ready for self-driving
Posted 13-Jun-2019 10:47


100,000 customers connected to fibre broadband network through Enable
Posted 13-Jun-2019 10:35


5G uptake even faster than expected
Posted 12-Jun-2019 10:01


Xbox showcases 60 anticipated games
Posted 10-Jun-2019 20:24


Trend Micro Turns Public Hotspots into Secure Networks with WiFi Protection for Mobile Devices
Posted 5-Jun-2019 13:24


Bold UK spinoff for beauty software company Flossie
Posted 2-Jun-2019 14:10


Amazon Introduces Echo Show 5
Posted 1-Jun-2019 15:32


Epson launches new 4K Pro-UHD projector technology
Posted 1-Jun-2019 15:26


Lenovo and Qualcomm unveil first 5G PC called Project Limitless
Posted 28-May-2019 20:23


Intel introduces new 10th Gen Intel Core Processors and Project Athena
Posted 28-May-2019 19:28


Orcon first to trial residential 10Gbps broadband
Posted 28-May-2019 11:20



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.