Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | ... | 213 | 214 | 215 | 216 | 217 | 218 | 219 | 220 | 221 | 222 | 223 | 224 | 225 | 226 | 227 | 228 | 229 | 230 | 231 | 232 | 233 | ... | 285
812 posts

Ultimate Geek
+1 received by user: 282

Trusted

  # 1038614 7-May-2014 21:11
Send private message

Netcomm NF4V.
It's Broadcom based and has some interesting console commands:

 > xdslctl
Usage: xdslctl start [--up] <configure command options>
       xdslctl stop
       xdslctl connection [--up] [--down] [--loopback] [--reverb]
           [--medley] [--noretrain] [--L3] [--diagmode] [--L0]
           [--tones <r1-r2,r3-r4,...>] [--normal] [--freezeReverb] [--freezeMedley]
       xdslctl configure/configure1 [--mod <a|d|l|t|2|p|e|m|M3|M5|v>] [--lpair <(i)nner|(o)uter>]
           [--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>] [--sesdrop <on|off>]
           [--sra <on|off>] [--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <0xBitMap-UsDs>]
           [--Ginp <0xBitMap-UsDs>] [--TpsTc <0xBitMap-AvPvAaPa>] [--monitorTone <on|off>]
           [--profile <0x00 - 0xFF>|<"8a |8b |8c |8d |12a |12b |17a |30a">] [--us0 <on|off>]
           [--dynamicD <on|off>] [--dynamicF <on|off>] [--SOS <on|off>] [--maxDataRate <maxDsDataRateKbps maxUsDataRateKbps maxAggrDataRateKbps>]
           [--forceJ43 <on|off>] [--toggleJ43B43 <on|off>]
       xdslctl bert [--start <#seconds>] [--stop] [--show]
       xdslctl afelb [--time <sec>] [--tones] [--signal <1/2/8>]
       xdslctl qlnmntr [--time <sec>] [--freq <msec>]
       xdslctl inm [--start <INMIATO> <INMIATS><INMCC><INM_INPEQ_MODE><INM_INPEQ_FORMAT>] [--show]
       xdslctl snrclamp [--shape <shapeId>] [--bpshape [bpIndex-bpLevel,]]
       xdslctl nlnm [--show ] [--setThld <Thld_Num_Tones>]
       xdslctl diag [--logstart <nBytes>] [--logpause] [--logstop] [--loguntilbufferfull <nBytes>] [--loguntilretrain <nBytes>] [--dumpBuf <sizeKb>]
       xdslctl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog] [--Hlin] [--HlinS] [--Bits]
           [--pbParams] [--linediag] [--linediag1] [--reset] [--vendor] [--cfg]
       xdslctl profile [--show] [--save] [--restore]
       xdslctl --version
       xdslctl --help

I've tried the old configure --snr command. It doesn't seem to work on VDSL. :(

'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1038619 7-May-2014 21:18
Send private message

interesting..

one thing to be mindful, and the thing that i have been trying to work around, or atlest detect and handle appropriately, is multiple telnet sessions to busybox based modems (which most are..) tend to get very confused, output is spat out to the first connected session and after closing it, until it reboots itself, it is bricked.


yet to find an effective solution to this.


this looks very much like something i have looked at doing however..




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


 
 
 
 


'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1038622 7-May-2014 21:25
Send private message

Lorenceo: Netcomm NF4V.
It's Broadcom based and has some interesting console commands:


I've tried the old configure --snr command. It doesn't seem to work on VDSL. :(


so the netcomm isnt actually supported..  interesting that it gives into working.

how much tinkering did you do to get it to that stage? pascal aint my thing, but ima have a poke around with it..




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


812 posts

Ultimate Geek
+1 received by user: 282

Trusted

  # 1038625 7-May-2014 21:38
Send private message

Almost none. The stats software is set to Huawei HG612. The firmware on it seems pretty generic, and allows access to the Broadcom and Busybox CLI.

'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1038626 7-May-2014 21:40
Send private message

Lorenceo: Almost none. The stats software is set to Huawei HG612. The firmware on it seems pretty generic, and allows access to the Broadcom and Busybox CLI.


ah. nice




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1042479 12-May-2014 16:56
Send private message

i know its the snap forum but how do you find out your profile (8b or 17a) on a technicolour TG589vn v2

i cant seem to see it from the GUI or from the telnet session

'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1042482 12-May-2014 17:06
Send private message

Jase2985: i know its the snap forum but how do you find out your profile (8b or 17a) on a technicolour TG589vn v2

i cant seem to see it from the GUI or from the telnet session


i recall there being a thread that went over it, you have to use the CLI.


something like xdsl --show-stats IIRC.


GENERALLY, you can tell by your speed though, 17a is 99% of the time, over 55mbit, and 8b is generally under 50mbit. 




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


 
 
 
 


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1042483 12-May-2014 17:10
Send private message

cause my modem went off today when my UPS failed so its reconnected at 53mbps so im guessing ive lost 17a, maybe its to do with when i turned it back on,  maybe restart it at 6am? would that help?

my attenuation hasnt changed though


'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1042500 12-May-2014 17:15
Send private message

Jase2985: cause my modem went off today when my UPS failed so its reconnected at 53mbps so im guessing ive lost 17a, maybe its to do with when i turned it back on,  maybe restart it at 6am? would that help?

my attenuation hasnt changed though



sounds possibly like a bad sync, maybe unclean power affecting it if your no longer going via the UPS.


17a normally isnt lost that easy though. DLM-1 is another story again.




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1042502 12-May-2014 17:21
Send private message

still on DLM1 so thats something

'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1042504 12-May-2014 17:23
Send private message

Jase2985: still on DLM1 so thats something


generally you wont loose DLM-1 till like day or two after, but it takes its time to get back.

xdsl info expand=enabled

looks to be the command your looking for, however it doesnt appear to indicate VDSL profile, simply the DLM profile..



worst comes to worst, call your isp, and ask..




#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1042506 12-May-2014 17:25
Send private message

would have thought it would show it somewhere in the stats

'That VDSL Cat'
10491 posts

Uber Geek
+1 received by user: 2522

Trusted
Spark
Subscriber

  # 1042520 12-May-2014 17:45
Send private message

Jase2985: would have thought it would show it somewhere in the stats


probably does, i just cant find the command myself.


as you have one of these devices yourself, have you tried probing the help responses...





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.


8662 posts

Uber Geek
+1 received by user: 2980

Lifetime subscriber

  # 1042534 12-May-2014 17:59
Send private message

yes been through the ones i think it would be but there are just so many different options

google wasnt much help

393 posts

Ultimate Geek
+1 received by user: 52


  # 1047086 17-May-2014 16:53
Send private message

My Fritz just stopped responding so I had to reboot it. Thus ends my epic connection. From the last push service email:
DSL Information     
    
Current throughput     70000 kbit/s (receive direction)     10360 kbit/s (send direction)
Line attenuation                 6 dB (receive direction)                6 dB (send direction)
Signal-to-noise ratio           7 dB (receive direction)              31 dB (send direction)
DSL version     1.68.19.17     
DSL status     active since 240:01:05:52

1 | ... | 213 | 214 | 215 | 216 | 217 | 218 | 219 | 220 | 221 | 222 | 223 | 224 | 225 | 226 | 227 | 228 | 229 | 230 | 231 | 232 | 233 | ... | 285
View this topic in a long page with up to 500 replies per page Create new topic



Switch your broadband provider now - compare prices


Twitter and LinkedIn »



Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Dunedin selects Telensa to deliver smart street lighting for 15,000 LEDs
Posted 18-Jul-2019 10:21


Sprint announces a connected wallet card with built-in IoT support
Posted 18-Jul-2019 08:36


Educational tool developed at Otago makes international launch
Posted 17-Jul-2019 21:57


Symantec introduces cloud access security solution
Posted 17-Jul-2019 21:48


New Zealand government unveils new digital service to make business easier
Posted 16-Jul-2019 17:35


Scientists unveil image of quantum entanglement
Posted 13-Jul-2019 06:00


Hackers to be challenged at University of Waikato
Posted 12-Jul-2019 21:34


OPPO Reno Z now available in New Zealand
Posted 12-Jul-2019 21:28


Sony introduces WF-1000XM3 wireless headphones with noise cancellation
Posted 8-Jul-2019 16:56


Xero announces new smarter tools, push into the North American market
Posted 19-Jun-2019 17:20


New report by Unisys shows New Zealanders want action by social platform companies and police to monitor social media sites
Posted 19-Jun-2019 17:09


ASB adds Google Pay option to contactless payments
Posted 19-Jun-2019 17:05


New Zealand PC Market declines on the back of high channel inventory, IDC reports
Posted 18-Jun-2019 17:35


Air New Zealand uses drones to inspect aircraft
Posted 17-Jun-2019 15:39


TCL Electronics launches its first-ever 8K TV
Posted 17-Jun-2019 15:18



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.