Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


47 posts

Geek
+1 received by user: 2


Topic # 116618 4-May-2013 20:27
Send private message

I have installed two master filter in the last week.
First one at my house as i am in the process of getting new cabinet at the end of my street.
Thought i would be ahead of the 8 ball.
stats before and after on adsl.

Before

After


Please note that my upload has nearly doubled, but download has not changed. Hope this will all change when new cabinet is live this month ROL/AV(new cabinet) ROl/Z




The second one i installed was at my mothers house with adsl 2 last week.
Lines stats were good, but today i checked the connection and the modem has been resetting itself
to 3000Kbps, where before it was 14420Kbps download. Upload has not changed.

Can anyone please explain why it has dropped since last week.

Before

After


Thank you

Create new topic
5544 posts

Uber Geek
+1 received by user: 249

Trusted
Geekzone
Lifetime subscriber

  Reply # 811323 4-May-2013 20:27
Send private message

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

 



 

If you are posting regarding DSL speeds please check that

 



 

- you have reset your modem and router

 


 

- your PC (or other PCs in your LAN) is not downloading large files when you are testing

 

- you are not being throttled by your ISP due to going over the monthly cap

 


 

- your tests are always done on an ethernet connection to the router - do not use wireless for testing

 


 

- you read this topic and follow the instructions there.

 



 

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

 



 

- Your ISP and plan

 


 

- Type of connection (ADSL, ADSL2, VDSL)

 


 

- Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)

 


 

- Your general location (or street)

 


 

- If you are rural or urban

 


 

- If you know your connection is to an exchange, cabinet or conklin

 


 

- If your connection is to a ULL or wholesale service

 


 

- If you have done an isolation test as per the link above

 



 

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

 



 

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

 



 

I recommend you read these two blog posts:

 



 

- Is your premises phone wiring impacting your broadband performance? (very technical)

 


 

- Are you receiving a substandard ULL ADSL2+ connection from your ISP?




I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.



8027 posts

Uber Geek
+1 received by user: 387

Trusted
Subscriber

  Reply # 811420 5-May-2013 01:55
Send private message

The first one is an ADSL1 (g.dmt) connection, you're basically getting the max line rates possible on ADSL1. Your attenuation of 6dB is nice an low so when the new cabinet goes live you should get much higher line rates.

You may need to call your ISP to get them to action a profile change if it doesn't happen automatically after the cabinet is completed, also bear in mind the go live for the cabinet may be sometime later than the physical work on it.

For the second one there could be a number of reasons why the line rate is dropping. If you are 100% sure there is a just the single cable from the modem to the the splitter/filter and your new connections are good (gel caps etc) connecting cable to filter and filter to line then it's probably an external line issue which you would log as a fault with your ISP for investigation.



47 posts

Geek
+1 received by user: 2


  Reply # 811453 5-May-2013 08:39
Send private message

The second one i installed, is an old house. The people before tried to put in extra jackpoints, but not a good job.
I started at the etp, where the yellow/black wire came in to the house (39 volts). Installed the filter here(black to white & yellow to colour wire). Then ran cat5 to first jack, green /white to dsl jack, blue/ white to phone jack. ran extra 2 phone jacks from here.
Checked voltage at all jacks at 39 volts.

I will keep eye on it and if now improve then will contact telecom.

Thanks for your help

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.