Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 | 4 | 5 | 6 | 7
westynz
3 posts

Wannabe Geek

Trusted

  #922932 28-Oct-2013 10:50
Send private message

Hi all,

Any chance we can get a link to the beta download posted here? Itching to get this 130 setup the same way i had the 120 working - but all attempts have failed to date.

Thanks,
James

Affiliate link
 
 
 

Affiliate link: Free kids accounts - trade shares and funds (NZ, US) with Sharesies.
bsgoldy
9 posts

Wannabe Geek


  #922935 28-Oct-2013 10:54
Send private message

Sorry Mate, Due to Snappernet Terms & conditions, we cannot post beta firmware here, But send an email to http://www.snappernet.co.nz/contact/tech/, they will respond very quickly. Cheers.

westynz
3 posts

Wannabe Geek

Trusted

  #922936 28-Oct-2013 11:01
Send private message

Wondered if that would be the case - understand, and thanks for the response!



plo009
107 posts

Master Geek


  #923521 29-Oct-2013 13:09
Send private message

So if i understand correctly, with the beta firmware i should be able to bridge my 1043nd running gargoyle with a dv130 on vdsl2 like i'm doing now with my dv120 on adsl2+?

cyril7
8756 posts

Uber Geek

ID Verified
Trusted
Subscriber

  #923524 29-Oct-2013 13:19
Send private message

Correct.

Cyril

plo009
107 posts

Master Geek


  #923542 29-Oct-2013 13:52
Send private message

Hmm, just realized that you must use the fritzbox with snap for vdsl2 which doesn't support bridging :/.

Is there any work arounds or i'm stuck with the fritzbox if i want snap vdsl2?

Really like the service quality at snap so don't want to switch to another isp if possible :).



chevrolux
4962 posts

Uber Geek
Inactive user


  #923604 29-Oct-2013 15:29
Send private message

plo009: Hmm, just realized that you must use the fritzbox with snap for vdsl2 which doesn't support bridging :/.

Is there any work arounds or i'm stuck with the fritzbox if i want snap vdsl2?

Really like the service quality at snap so don't want to switch to another isp if possible :).




The Fritzbox isnt required for Snap it is just simply the router they will support. And i you want to use their VoIP service you need to use the Fritz too. There is nothing stopping you getting a Zyxel or Draytek and bridging them to your current router if you just want VDSL. It just means it is up to you to support it.



richardpaul
7 posts

Wannabe Geek

Trusted

  #926157 2-Nov-2013 09:09
Send private message

Official release of DV130 firmware version 3.7.1.3 is now available at http://www.draytek.net.nz/draytek/downloads/

There is also a bridging guide available on the support page http://www.draytek.net.nz/draytek/support/


spacedog
408 posts

Ultimate Geek


  #933869 14-Nov-2013 13:59
Send private message

Ok I am pretty stuck. I had a vigor 130 that I used with my dd-wrt flashed Asus AC66 router and I use snap.net.

Today I upgraded my connection to VDSL2 and the vigor is synching perfect, but I can't establish a PPPOE connection from dd-wrt. I have the 3.7.1.3 fw on the vigor and I have followed the bridging guide from snapper, but still no luck.

This should work, right?

What am I doing wrong?

Inphinity

2704 posts

Uber Geek

Subscriber

  #933875 14-Nov-2013 14:15
Send private message

spacedog: Ok I am pretty stuck. I had a vigor 130 that I used with my dd-wrt flashed Asus AC66 router and I use snap.net.

Today I upgraded my connection to VDSL2 and the vigor is synching perfect, but I can't establish a PPPOE connection from dd-wrt. I have the 3.7.1.3 fw on the vigor and I have followed the bridging guide from snapper, but still no luck.

This should work, right?

What am I doing wrong?


Are you tagging VLAN 10? ADSL doesn't require it, but VDSL does.

spacedog
408 posts

Ultimate Geek


  #933970 14-Nov-2013 16:07
Send private message

Inphinity:
spacedog: Ok I am pretty stuck. I had a vigor 130 that I used with my dd-wrt flashed Asus AC66 router and I use snap.net.

Today I upgraded my connection to VDSL2 and the vigor is synching perfect, but I can't establish a PPPOE connection from dd-wrt. I have the 3.7.1.3 fw on the vigor and I have followed the bridging guide from snapper, but still no luck.

This should work, right?

What am I doing wrong?


Are you tagging VLAN 10? ADSL doesn't require it, but VDSL does.


Yup, I had VLAN 10 ticked.  

However, I just managed to get it to work, but this is really weird.....

So I was looking at the MPoA config page on the 130 as per the bridging guide and I noticed that their guide showed the 'Enable Bridge Mode' box as unticked.  As a test I ticked that box and clicked the OK button and the screen simply refreshed and reverted back to the previous settings.  Unlike normal behavior in the Vigor where it asks to reboot with the 'current configuration'.  Instantly my dd-wrt router was able to authenticate.  Rebooted the Vigor and everything continues to work great.

I did some further testing and restored my Vigore 130 to factory default and manually reconfigured it.  Same result. Unless I tick 'Enable Bridge Mode' and click OK, I can't authenticate.

I can make this issue repeat by going to the MPoA page, click the MPoA 'Enable' radio button (don't even need to toggle between Enable/Disable), click OK and you are asked to reboot using the current configuration.  After that reboot, I cannot PPPOE authenticate UNTIL I perform the steps mentioned above.

Seems like a firmware bug?  Can anyone else confirm that they can reproduce this bug?  Would be good to know if it is a FW bug or something really weird with my modem and router setup.

Here's a screenie to show what I'm talking about:

Vigor 130 MPoA Config

byronpaul
7 posts

Wannabe Geek

Trusted

  #933993 14-Nov-2013 16:37
Send private message

Try setting as 1483 bridged IP LLC & then clicking the bridge button. Retry you PPPoE initiator.
I've seen 1 x case where this was required over the last week for a Telecom VDSL connection. No previous reports on Snap circuits.

NOTE: Clicking the bridge button has no effect when using IPoE.


spacedog
408 posts

Ultimate Geek


  #934001 14-Nov-2013 17:11
Send private message

byronpaul: Try setting as 1483 bridged IP LLC & then clicking the bridge button. Retry you PPPoE initiator.
I've seen 1 x case where this was required over the last week for a Telecom VDSL connection. No previous reports on Snap circuits.

NOTE: Clicking the bridge button has no effect when using IPoE.



Clicking the bridge tick boxes is 100% reproducible for me as I stated in my post above.  I have reproduced it 5x in a row.

stevenz
2798 posts

Uber Geek


  #937408 19-Nov-2013 16:28
Send private message

Any of you chaps who have ditched the 130 in favour of an alternative want to offload the old 130?




mysticnz
145 posts

Master Geek

ID Verified

  #952336 14-Dec-2013 20:44
Send private message

Just purchased one of these, have a couple of routers to test bridging with will let you know how it goes.

1 | 2 | 3 | 4 | 5 | 6 | 7
View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Google Bringing First Cloud Region to Aotearoa New Zealand
Posted 10-Aug-2022 08:51


ANZ To Move to FIS Modern Banking Platform
Posted 10-Aug-2022 08:28


GoPro Hero10 Black Review
Posted 8-Aug-2022 17:41


Amazon to Acquire iRobot
Posted 6-Aug-2022 11:41


Samsung x LIFE Picture Collection Brings Iconic Moments in History to The Frame
Posted 4-Aug-2022 17:04


Norton Consumer Cyber Safety Pulse Report: Phishing for New Bait on Social Media
Posted 4-Aug-2022 16:50


Microsoft Announces New Solutions for Threat Intelligence and Attack Surface Management
Posted 3-Aug-2022 21:54


Seagate Addresses Hyperscale Workloads with Enterprise-Class Nytro SSDs
Posted 3-Aug-2022 21:50


Visa Launching Eco-friendly Payment Solutions in New Zealand
Posted 3-Aug-2022 21:48


NCR Delivers Services to Run Bank of New Zealand ATM Network
Posted 30-Jul-2022 11:06


New HP Portfolio Supports New Era of Hybrid Work
Posted 28-Jul-2022 17:14


Harman Kardon Launches Citation MultiBeam 1100 Soundbar
Posted 28-Jul-2022 17:10


Nanogirl Labs Launches Creator Project
Posted 28-Jul-2022 17:05


Marvel Snap Launches as an Action Collectible Card Game
Posted 26-Jul-2022 17:46


Jabra Talk 65 Review
Posted 26-Jul-2022 17:31









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.







GoodSync is the easiest file sync and backup for Windows and Mac