Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




6 posts

Wannabe Geek


Topic # 143978 3-May-2014 19:28
Send private message



Hi all,

My current ADSL2 setup utilizes a BT-male / RJ11 cord (roughly 5m long) to connect the phone jack to my router (DGN-2200 NetGear), then using Cat5E between router and PC.

Today I tested a phone/ADSL splitter that came with my router. It made no difference to line attenuation, and noise margin was basically unchanged. Below are some screenshots from my routers interface. Screenshot 1 and 3 have the line splitter connected, 2 and 4 without. The difference on downstream is the only substantial change.



I want to install a better phone jack/master splitter etc to cut out unnecessary signals. The wiring seemed old - brown, white, black, with yellow disconnected. A blue and white wire connecting a test termination unit (I have no idea what that does). Does anyone have some idea of how to improve the setup. I'm hoping I can upgrade the connection without altering the setup from outside of the building.

Any feedback is appreciated.

Cheers,

Old phone Jack

Create new topic
1948 posts

Uber Geek
+1 received by user: 469
Inactive user


  Reply # 1036172 3-May-2014 19:31
Send private message

If you think you are handy enough there is a trademe $80 self install master filter kit... otherwise if you are close enough to the exchange vdsl and that includes a master filter.



6 posts

Wannabe Geek


  Reply # 1036184 3-May-2014 20:08
Send private message

Hi, thanks for the suggestion. I have found a master splitter on pbtech.co.nz for $23 odd dollars, so I would need to figure out how to install it. The brown, black, yellow and white wires, are they some old colour code? The yellow is already disconnected, what do the others do? I forgot to mention, I don't have a phone connected, so just naked, and I'm moving out in 3 months.

Cheers

 
 
 
 


404 posts

Ultimate Geek
+1 received by user: 94


  Reply # 1036193 3-May-2014 20:30
Send private message

malincter: Hi, thanks for the suggestion. I have found a master splitter on pbtech.co.nz for $23 odd dollars, so I would need to figure out how to install it. The brown, black, yellow and white wires, are they some old colour code? The yellow is already disconnected, what do the others do? I forgot to mention, I don't have a phone connected, so just naked, and I'm moving out in 3 months.

Cheers


well in that case you don't actually need the filter at all




 The views expressed by me are not necessarily those of my employer


800 posts

Ultimate Geek
+1 received by user: 203

Subscriber

  Reply # 1036194 3-May-2014 20:30
Send private message

malincter:

<snip>
I want to install a better phone jack/master splitter etc to cut out unnecessary signals. The wiring seemed old - brown, white, black, with yellow disconnected. A blue and white wire connecting a test termination unit (I have no idea what that does). Does anyone have some idea of how to improve the setup. I'm hoping I can upgrade the connection without altering the setup from outside of the building.

Any feedback is appreciated.

Cheers,

Old phone Jack


2 questions to help with my sugestions - 1 is this the only jackpoint in the house or are there others and 2 (related to one ) what letter or number is embosed on the front, right hand, near the bottom.

why  because that jackpoint looks like a 2 wire jack and there are more wires connected (3 instead of 2 from the black cable) - the line terminator can be removed with harming your adsl service but removeing it generaly wount improve it either.  It is there to emulate an older style master jackpoint for the line test units to identify that the line is infact terminated and not disconnected.

4324 posts

Uber Geek
+1 received by user: 1203


  Reply # 1036197 3-May-2014 20:33
Send private message

Do you have just the one phone jack?

I presume it's a 2 wire jack - is there a "2" on the front of it? If it is, you are probably running on the brown/white pair (given yellow is disconnected) so try disconnecting the black wire - it may give a slightly better connection, but you're doing pretty well already.

If you have only 1 jack, on a naked connection (and you're moving out before ever wanting POTS again), I wouldn't bother paying for a master filter.



6 posts

Wannabe Geek


  Reply # 1036200 3-May-2014 20:51
Send private message

It has a 2 on the outside of the faceplate. It is the only one in the unit. I thought that interference was coming through the line, regardless of whether a phone is connected. Is this not true? I am kind of enjoying the process, and would like to see if a master filter would make it better. If the filter that came with the modem could almost halve my speed, then surely a good filter could improve it somewhat. Just a guess.

404 posts

Ultimate Geek
+1 received by user: 94


  Reply # 1036202 3-May-2014 21:06
Send private message

malincter: It has a 2 on the outside of the faceplate. It is the only one in the unit. I thought that interference was coming through the line, regardless of whether a phone is connected. Is this not true? I am kind of enjoying the process, and would like to see if a master filter would make it better. If the filter that came with the modem could almost halve my speed, then surely a good filter could improve it somewhat. Just a guess.


point here is that you are running a naked connection.....

a filter/splitter is designed to filter out the pots section of the line (that you are not using)
looks to me like the budget filter is blocking more than it should / needs to 






 The views expressed by me are not necessarily those of my employer


4324 posts

Uber Geek
+1 received by user: 1203


  Reply # 1036203 3-May-2014 21:07
Send private message

A master filter does two things

1) A low pass filter for the POTS circuit so xDSL noise doesn't get heard on the phone

2) Isolates any extra internal wiring to provide a transmission line for xDSL frequencies through to the modem.

In your case (1) doesn't matter because you have no phone, and (2) also doesn't matter as there appears to be only the one jack and no extra wiring.

You could do it just to learn the process (good on you!), but don't expect an improvement in performance.

That plugin filter you are using is probably just faulty.

800 posts

Ultimate Geek
+1 received by user: 203

Subscriber

  Reply # 1036206 3-May-2014 21:13
Send private message

malincter: It has a 2 on the outside of the faceplate. It is the only one in the unit. I thought that interference was coming through the line, regardless of whether a phone is connected. Is this not true? I am kind of enjoying the process, and would like to see if a master filter would make it better. If the filter that came with the modem could almost halve my speed, then surely a good filter could improve it somewhat. Just a guess.


OK since it is a two wire jackpoint then there are more wires connected than there should be - the sugestion is the remove the black wire.

A master filter filters ADSL off/away from the POTS line and the rest of the jackpoints in a house  - if there is only one jackpoint (and you have a naked BB service) then there is no need to filter at all. You could just plug the modem/router directly into the jackpoint with a standard line cord

Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

Intel introduces new 8th Generation processors
Posted 21-Aug-2017 19:02


Trend Micro launches Home Network Security
Posted 21-Aug-2017 18:38


Avondale College students at top of Microsoft Office Specialist World Championship
Posted 21-Aug-2017 14:11


Garmin introduces inReach SE+ and inReach Explorer+
Posted 21-Aug-2017 14:05


Public Wi-Fi plus cloud file sharing
Posted 18-Aug-2017 11:20


D-Link NZ launches professional Wireless AC Wave 2 Access Point for businesses
Posted 17-Aug-2017 19:25


Garmin introduces the Rino 700 five-watt two-way handheld radio
Posted 17-Aug-2017 19:04


Garmin announces the Foretrex 601 and Foretrex 701 Ballistic Edition for outdoor and tactical use
Posted 17-Aug-2017 19:02


Brightstar announces new distribution partnership with Samsung Knox platform in Australia
Posted 17-Aug-2017 17:07


Free gig-enabled WiFi network extends across Dunedin
Posted 17-Aug-2017 17:04


Samsung expands with connect Gear S3 Frontier
Posted 17-Aug-2017 15:55


Fact-checking Southern Cross Next cable is fastest to USA
Posted 17-Aug-2017 13:57


Thurrott says Microsoft Surface is dead last for reliability
Posted 16-Aug-2017 15:19


LibreOffice 5.4 works better with Microsoft Office files
Posted 16-Aug-2017 13:32


Certus launches Cognition
Posted 14-Aug-2017 09:31



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.