Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.




4 posts

Wannabe Geek


Topic # 144252 12-May-2014 19:14
Send private message

Hi, today I signed up for UFB and I'm trying to prepare for it's arrival in a few weeks.

I use pfSense as a firewall which means I don't need a router and can connect it directly to the ONT.
I'm not that strong with my pfSense setup but I have been able to find enough info to initially prepare it for the change.

There are a few people who have set it up to do what I'm trying to achieve but there is very little information how.
The purpose of this post is to have the information available for anyone else wanting to do the same.

This info comes from the pfSense Forums, post id 59436.0

1. Go to Interfaces -> (assign) and click on the VLANs tab to create the VLAN,
2. go to Interfaces -> (assign) and click on the "+" at the bottom right to add the VLAN to the pool of interfaces available to pfSense,
3. go to Interfaces -> (assign) and click on the PPPs tab then click on the "+" to add a new PPPoE interface (if necessary) then configure it
4. go to Interfaces -> (assign) to set the pfSense WAN interface to the newly configured PPPoE interface.

It's not that clear to people like me with little experience with pfSense so here's what I've done so far (will be updated if there are errors + if I learn it needs to be different):
1. Go to Interfaces -> (assign) and click on the VLANs tab to create the VLAN
        Parent interface: select your WAN port (em1 on mine)
        VLAN tag: 10
        Description: VLAN10
        Click SAVE

2. go to Interfaces -> (assign) and click on the "+" at the bottom right to add the VLAN to the pool of interfaces available to pfSense
       The new VLAN10 will show up as OPT1 (if no other VLANs already exist)
       Click SAVE

3. go to Interfaces -> (assign) and click on the PPPs tab then click on the "+" to add a new PPPoE interface (if necessary) then configure it
       Link Type: PPPoE
       Link interface(s): em1_vlan10
       Description: pick a name that means something
       Username: bob.smith
       Password: ***********
       Service name: leave blank
       Click SAVE

4. go to Interfaces -> (assign) to set the pfSense WAN interface to the newly configured PPPoE interface.
      Set WAN interface to the new PPPoE(em1_vlan10) - pick a name that means something

At this time I don't know if this info is correct - please feel free to assist. I'll edit this post with corrected info as I learn so the most correct data is always at the top (if it's possible to edit)...

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
1831 posts

Uber Geek
+1 received by user: 583

Trusted

  Reply # 1042616 12-May-2014 20:12
Send private message

Edit: This post was probably wrong so I removed it.

1821 posts

Uber Geek
+1 received by user: 573

Subscriber

  Reply # 1042618 12-May-2014 20:19
Send private message

Are you sure? Im on Chorus UFB and you need to set VLAN to 10 For the interface going to the ONT. Don't know if the other Local Fibre Companies Also require VLAN tagging though.

 
 
 
 




4 posts

Wannabe Geek


  Reply # 1042624 12-May-2014 20:30
Send private message

I'll be on Chorus too. Not sure what actual setting I'll need yet (tagged or untagged - I think it will be tagged from what I've read to date) - will find out during the last stage when they come to configure it. Sounds like I could be on the right track for now. It's going to be a few weeks before it's all done but I'll edit my first post with the actual install details that work once all done. Thanks for the feedback.

1831 posts

Uber Geek
+1 received by user: 583

Trusted

  Reply # 1042646 12-May-2014 20:49
Send private message

Hmm ok, I am just going off my setup here but you're right, I'm not with Chorus (Ultrafast here).

I'll edit my original post.

54 posts

Master Geek
+1 received by user: 2


  Reply # 1042647 12-May-2014 20:49
One person supports this post
Send private message

Currently using pfsense on a pc engine box, my fiber goes in next week so will be interested to try this out.


25336 posts

Uber Geek
+1 received by user: 5183

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1042659 12-May-2014 21:09
Send private message

VLAN10 is standard across every LFC and Chorus. Without an 802.1q tag you can't have 802.1p, so this means no high priority CIR.

Some ISPs do offer the ability to offer untagged UNI ports.



212 posts

Master Geek
+1 received by user: 10


  Reply # 1042797 13-May-2014 09:25
Send private message

When I was setting my pfsense up I had to configure mine a little bit differently as those steps did not work for me...

I only completed step 1, opened the VLAN interface and set the PPPoE credentials there - Hard to explain as I dont have the router in front of me.

If you get stuck and need to check settings and such, just send me a message.





153 posts

Master Geek
+1 received by user: 9


  Reply # 1042940 13-May-2014 12:13
Send private message

You sure your username is correct?

Username: bob.smith

normally there is @snap.net.nz or whatever your ISP is, it's e-mail liked.

check with your ISP for the correct setting normally can be found on ISPs website


by the way, what version of pfSense are you using? I wouldn't bother with 2.2-ALPHA atm as still buggy, even on my testbed machine.

 

136 posts

Master Geek
+1 received by user: 27


  Reply # 1042968 13-May-2014 12:31
Send private message

Also there is a few ISP's That use DHCP instead of PPPoE, so you may want to make a edit up there, if the pfSense is cabaple. (Which it should be....)

25336 posts

Uber Geek
+1 received by user: 5183

Moderator
Trusted
Biddle Corp
Subscriber

  Reply # 1042974 13-May-2014 12:40
Send private message

D1NZ: You sure your username is correct?

Username: bob.smith

normally there is @snap.net.nz or whatever your ISP is, it's e-mail liked.

check with your ISP for the correct setting normally can be found on ISPs website


by the way, what version of pfSense are you using? I wouldn't bother with 2.2-ALPHA atm as still buggy, even on my testbed machine.

 


It's not linked to email, it's just that for most ISPs it'll connect back to a radius server of some sort.

The format will be whatever your ISP uses - which doesn't always mean it's got a @ in it.

Some ISPs also used port based auth so it doesn't matter what you enter.



3113 posts

Uber Geek
+1 received by user: 935

Subscriber

  Reply # 1042983 13-May-2014 12:58
Send private message

Make sure 'service name' is empty too.

345 posts

Ultimate Geek
+1 received by user: 154

Subscriber

  Reply # 1043085 13-May-2014 15:16
Send private message

One example of DHCP UFB is Orcon. I love how easy it is to set up, all you need is to set the router MAC to the MAC of the genius router you were sent, VLAN 10 tagging, and standard DHCP on the WAN port. Job done.

I understand PPP adds a decent amount of overhead which cripples 200+ megabit services. The ASUS RT-AC66U, one of the most powerful routers on the market today, is unable to push 300mbit over WAN when PPPoE is in use. Plain Ethernet and it goes to over 800mbit.

No doubt custom-supplied ISP routers can do better with specific optimizations, but I do wonder if ISPs will instead choose to switch to DHCP as UFB speeds increase?





772 posts

Ultimate Geek
+1 received by user: 251

Trusted

  Reply # 1043098 13-May-2014 15:49
Send private message

I'm pretty sure I've read comments on here from ISP staff that IPv6 cannot work with the current DHCP implementation on many of the LFCs yet.
Until the connections get faster than my router can handle as a PPPoE client, I'm not too concerned. Fibre's not even available where I live yet.

345 posts

Ultimate Geek
+1 received by user: 154

Subscriber

  Reply # 1043102 13-May-2014 15:54
Send private message

Lorenceo: I'm pretty sure I've read comments on here from ISP staff that IPv6 cannot work with the current DHCP implementation on many of the LFCs yet.
Until the connections get faster than my router can handle as a PPPoE client, I'm not too concerned. Fibre's not even available where I live yet.


Yes, I understand Orcon is waiting for Chorus to finish up DHCP work before IPv6 can be offered on UFB. I honestly don't expect this to be happening any time soon, NZ ISPs collectively don't give a rats arse about IPv6. Even Snap, the first residential ISP with IPv6 in NZ, has been promising static addresses for at least 2 years, with nothing to show.

EDIT: Here it is.

As with the rest of the world, nobody cares until they run out of addresses. And then they run CGNAT. And then comes the heat death of the universe. Sigh.

But the PPPoE thing isn't a problem for consumers, it's a problem for ISPs - after all, most customers run on ISP-supplied hardware.







4 posts

Wannabe Geek


  Reply # 1043118 13-May-2014 16:02
Send private message

I heard back from my ISP a short time ago.
I won't need a VLAN as they strip tagging sent by their supplier (seems strange to do so if it's already there??)
All I need is to set pfSense to use PPPoE on the Wan and use the correct username and password.

I'm with NOW, used to be Airnet.


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic



Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:





News »

FUJIFILM introduces X-E3 mirrorless camera with wireless connectivity
Posted 18-Sep-2017 13:53


Vodafone announces new plans with bigger data bundles
Posted 15-Sep-2017 10:51


Skinny launches phone with support for te reo Maori
Posted 14-Sep-2017 08:39


If Vodafone dropping mail worries you, you’re doing online wrong
Posted 11-Sep-2017 13:54


Vodafone New Zealand deploy live 400 gigabit system
Posted 11-Sep-2017 11:07


OPPO camera phones now available at PB Tech
Posted 11-Sep-2017 09:56


Norton Wi-Fi Privacy — Easy, flawed VPN
Posted 11-Sep-2017 09:48


Lenovo reveals new ThinkPad A Series
Posted 8-Sep-2017 14:37


Huawei passes Apple for the first time to capture the second spot globally
Posted 8-Sep-2017 10:45


Vodafone initiative enhances te reo Maori pronunciation on Google Maps
Posted 8-Sep-2017 10:40


Voyager Internet expand local internet phone services company with Conversant acquisition
Posted 6-Sep-2017 18:27


NOW Expands in to Tauranga
Posted 5-Sep-2017 18:16


Windows 10 Fall Creators Update coming Oct. 17
Posted 4-Sep-2017 14:10


Garmin introduce Garmin vivoactive 3
Posted 1-Sep-2017 18:38


Kiwibank wastes $90 million on software – Reseller News
Posted 1-Sep-2017 13:45



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.